User Manual

85
and the LCD display will return to the main
screen after 3 seconds.
To perform a f irmware update when available:
1. Switch off the V6 II and remove the
batteries inside.
2. Connect it to a computer via the Cactus
mini-USB cable MU-1 (optional).
3. Press and hold
, then switch on the
V6 II in TX or RX mode at the same time.
4. The V6 II is now in f irmware update mode.
The status LED blinks red rapidly. The
f irmware update program will then
recognize the connected V6 II and start
the upg r ade.
Note:
The mini-USB port can also be used to
customize an Auto Flash Prof ile (see
Section 11.3). Follow the steps above to
get V6 II into the f irmware update mode to
undergo the customization.
Please visit w w w.cactu s-im a ge.co m/v6ii.htm l
for more information.