00% recycled paper 100% papier recycle Multi-channel wireless microphone system User Instructions T h e s p e c i f i c a t i o n w o n’t d o a n d f u r t h e r f o r t h e i m p r o v e m e n t ac t u a l pr o d u c t wi l l no t be as pi c t u r e d Uses the unit before, please read the instruetion manual carefully and keep the instruction manual properly inorder to need in the future
UHF Microphone System 目录 A.Product Introduction 1 ............................................. （1）Advantages .....................................................1 （2）Technical Parameters .........................................2 B.System Components .............................................3 C.Functional Specifications ........................................4 Receiver （1） .....................................................4 （2）Handheld/Body Pack Transmitter ........................
UHF Microphone System Technical Parameters 1/4 inch unbalanced output, which makes it easy for users to connect to different external devices. Automatic Channel Tracking (ACT) The system has high-tech automatic channel tracking (ACT) function. After the receiver has set up the receiving channel, the transmitter frequency can be locked automatically and accurately by infrared data transmission, so that the transmitting frequency can be synchronized with the receiver.
UHF Microphone System Functional Specifications 3.
UHF Microphone System Functional Specifications Model and function description and specification (reference) part of the panel Eight Channel: A B C Back Panel function description Two Channel （1） D PO W E R 8 Ch a n n e l UH F W ire less Mi c r o p h o ne PL L 1 1 1 5 1 DC INPUT ANTENNA-B SET LCD Display 2 7 A 4 2 B 8 C 2 D 3 SE T S ET SE T S ET SE T S ET SE T S ET 1 5 3 BAL-B OUT MIX CUT 4 3 ANTE N NA -A 5 1 6 PO W E R 7 BAL-C OUT 1 DC INPUT （2） （2） F
UHF Microphone System Model:1108 Handheld instructions Model:S200 1 5 UHF Microphone System 3 Handheld instructions Model:1106 Model:1106S 1 1 1 3 2 3 3 5 5 4 4 4 Model:G3 Model:1109 1 1.Microphone head Section: Including Model:1107 Microphone Cover Net and Microphone 1 1 2 Cartiridge Module 2.LCD Display:Display working channels, 3 IR 4 3 8 3 2 4 IR 5 Battery, infrared frequency of operation, etc. 3.Switch button:Long press 5 seconds on/off the phone 4.
UHF Microphone System Body pack instructions Body pack Transmitters UHF Microphone System Wearing of Body Pack transmitter Body pack instructions Attach the pocket of transmitter on the belt with the crip on the back of the transmitter①，it can also be use on strap/guitar strap as shown by 1 the picture②，For best performance, the pocket of transmitter 2 1 4 3 2 5 6 should be secured by sliding the crip on to the belt/strap all the way down.
UHF Microphone System Conference instructions Conference Transmitter(1) Receiver Operation OPERATION OF THE RECEIVER . 1 Adjust the volume to the smallest before turned on the transmitter, then turn on the receiver,the LCD lights up and alphanumeric displayed, then LCD will display the channel and frequency of the receiver,press the 1 6 UHF Microphone System SET button can change the status. 2.
UHF Microphone System System settings 2- 3seconds later, CHANNEL or FREQU appears. Press the ▲ / ▼button to adjust the RF AF RF AF 5 10 15 20 25 30 35 F REQU -25 -20 -15 -10 -5 0 PEAK 5 10 15 20 25 30 35 40 - 30 -2 5 -20 -15 -10 -5 0 PEAK CHANNL RF AF 5 10 15 20 25 30 -30 -25 -20 -15 -10 -5 35 0 40 PEAK M H Z setting.
UHF Microphone System System settings OPERATION MENU OF LCD(Used for two channel only one screen) RF 5 CHAN 0 18 MUTE 649.320 MHZ 10 20 30 40 CH A AF -30 -25 -15 -5 0 RF 5 CHAN 0 18 MUTE 673.320 MHZ Normal work condition display 10 20 30 40 CH A AF -30 -25 -15 -5 shows like left picture： 0 A.Infrared frequency RF 5 CHAN 0 18 MUTE F- - - - - MHZ 10 20 30 40 CH A AF -30 -25 -15 -5 0 CHAN 0 18 MUTE RF 5 673.320 MHZ CH 0 RF 5 649.
UHF Microphone System RF 5 CHA N 0 18 MU T E 649.320 10 20 30 40 CH A MHZ AF -30-25 -15 -5 0 MU T E 673.320 CH A MHZ AF -30 -2 5 -15 -5 UHF Microphone System System settings Turn on the power of the transmitter Open the batter holder of the transmitter to expose the IR port, and put RF 5 10 20 30 40 CHA N 0 8 System settings 0 the IR port towards to IR window of the receiver, press A, B, C, D button to switch to relevant channel, and press “SET” button to synchronize the frequency.
UHF Microphone System Receiver Settings UHF Microphone System Transmitter Settings （1）LCD Instruction for Handheld/Bodypack transmitters （Figure 9） ① CHANNEL: display current working channel ② BATT: Display the Remaining Electricity of Transmitter Battery. When the batt2 1 ery power is low, the sign flashes. The battery should be replaced immediately to 3 （Figure 8） ensure the normal operation of the transmitter.
UHF Microphone System Connection F.Connection UHF Microphone System G.Troubleshooting 1.Connection instructions for dual channel models (figure 12) DC INPUT ANTENN A-B BAL- OUT No operation indication ANTENNA-A BAL - OUT MIX CUT Problem No RF signal 2.Connection instructions for four channel models (figure 13) DC INPUT MIX CUT ANTENNA-B BAL-D OUT BAL-C OUT BAL-B OUT BAL-A OUT ANTENNA-A 3.
011ÿ3456768ÿ94 6ÿ 79ÿ 7 ÿ 79ÿ37 ÿ 45ÿ ÿ ÿ ÿ011ÿ5 9 ÿÿ 547 6ÿ79ÿ9 ÿ ÿ ÿ 3768ÿ3 ÿ 6 77 69 ÿÿ 79ÿ 7 ÿ4ÿ6 ÿ 4 9ÿ 45 ÿ76 5 56 !ÿ46 ÿÿ " ÿ 79ÿ 7 ÿ 9ÿ4 ÿ46ÿ76 5 56 ÿ5 7 !ÿ 76 768ÿ76 5 56 ÿ 4ÿ4ÿ 4 9ÿ 6 975 ÿ 547 6 ÿ ÿ 1 4689ÿ 5ÿ 7 7 47 69ÿ6 ÿ# 599 ÿ4 5 ÿ ÿ ÿ 45 ÿ59 697 ÿ 5ÿ 746 ÿ ÿ 7 ÿ ÿ 95$9ÿ4 57ÿ ÿ 54 ÿ ÿ% 7 6 ÿ ÿ ÿ 7 ÿ 49ÿ 6ÿ 4 4 ÿ ÿ ÿ8654 ÿ&0ÿ# 9 5ÿ5% 75 6 ÿ ÿ 7 ÿ 46ÿ ÿ 9 ÿ 76ÿ 54 ÿ# 9 5ÿ 6 77 6ÿ37 ÿ5957 7 6 ÿ ÿ 79ÿ 7 ÿ 54 9ÿ 6ÿ4ÿ6 ' 5 7
