User's Instructions

UHF Microphone System
Systemsettings
UHF Microphone System
Systemsettings
Turn on the power of the transmitter
0
1
CHA
8
N
MUT E
RF
5
10 2 0 30 40
0
C
HA
8
N
MUT E
RF
5
10 20 30 40
649.320
CH
A
673.320
CH A
MHZ AF -30 -25 -15 -5
MHZ AF -30- 25 -15 -5
0
0
Open the batter holder of the transmitter to expose the IR port, and put
the IR port towards to IR window of the receiver, press A, B, C, D button
to switch to relevant channel, and press “SET” button to synchronize
the frequency.
（Figure 5）
When there is RF sigal appear, the system is working normally.
(2)Multi System Settings
LCD Display
(suitable for multi units using at the same time)
CHANNEL
CHANNEL
CHANNEL
CHANNEL
AF
RF
AF
RF
AF
RF
AF
RF
4
C hanne l U HF W ire le ss M icr op hone P LL
A.Turn on the power of all receivers, and meanwhile turn off all the
transmitters.
B.Set different frequency for all receivers
C.Turn on the transmitters of the first receiver
D.Follow the guidance of single system setting to set the frequency
（Figure 6）
Repeat the operations to each system.
（
2
）
Multi System Settings
Pls pay attention; you can only expose IR port of one transmitter
when you synchronize the frequency with the system.
A.Turn on the power of all receivers, and meanwhile turn off all the
transmitters.
！
B.Set different frequency for all receivers
C.Turn on the transmitters of the first receiver
D.Follow the guidance of single system setting to set the frequency
2.SystemSettings(suitablefor4channelsand8channelsmodels)
（
1
）
SingleSystemSettings
FrequencySelectionforthereceiver
Repeat the operations to each system.
Frequency Selection
Pls pay attention; you can only expose IR port of one transmitter
when you synchronize the frequency with the system.
！
（single LCD models）, pressA, B, C, D button to switch to the relevant
channel, and press “▲”or“▼”button to choose the suitable frequ-
ency and press “SET” button to confirm the frequency.
(2 and 4 LCD models), Press “▲”or“▼”button according to LCD
of the relevant channel to choose suitable frequency, and press “SET”
button to confirm the frequency.
3.Receiver Settings
Any option displayed on the LCD screen will be locked automatically
after six automatic flickers.
3
1
1
2
5
10 15 20 25 30 35 40
RF
AF
CHAN
0 18
RF
5
10 20 30 40
CHAN
0 18
RF
5
10 20 30 40
MUTE
MUTE
-30 -25 -20 -15 -10 -5
0
PEAK
649.320 CH
A
673.320 CH
A
CH 031
M
H
Z
MHZ
F
-30
-5
MHZ AF -30 -25 -15 -5
0
A
-25 -15
0
IR Synchronization for the transmitters (figure 6)
3
1
2
4
4
2
（Figure 7）
18
19