User's Instructions

UHF Microphone System
TechnicalParameters
UHF Microphone System
System Components
Receiver
1/4 inch unbalanced output, which makes it easy for users to
connect to different external devices.
Automatic Channel Tracking (ACT)
The system has high-tech automatic channel tracking (ACT)
function. After the receiver has set up the receiving channel, the
transmitter frequency can be locked automatically and accur-
ately by infrared data transmission, so that the transmitting
frequency can be synchronized with the receiver.
Oscillation mode:PLL(Digital frequency synthesizer)
Stray Reject:≥80dB
Image Reject:≥80dB
Sensitivity:5dBuV
Audio Output Level:XLR Output Jack:250mV /600Ω
1/4” Output Jack:400mV/3kΩ
Working Voltage:DC 13.5-16V
Working Current:≤800mA
Anti-interference Multi Channels Design
The system uses a variety of anti-interference technology. It
has 160 non-interference frequencies as the factory default s-
etting. It is reasonable to design and convenient for users to use
multi-system at the same time. It is an ideal product for speech
and conference rooms.
Handheld Transmitter
RF Power Output： Max 30 mw
Oscillation mode:PLL(Digital frequency synthesizer)
Frequency stability： ＜ 30ppm
Dynamic range
：≥
100dB(A)
Battery status indicator/Lower power warning
Frequency response： 50Hz-15KHz
Max input pressure
：
130dB SPL
Microphone pickup： Moving coil
power supply
：
2 AA Size Battery
The battery power of handheld transmitter, bodypack trans-
mitter and conference transmitter can be displayed on their LCD,
and the warning is given when the battery power is low, promptly
reminding users to change batteries to ensure the normal oper-
ation of the system.
Conference/Body Pack Transmitters
RF Power Output： Max 30 mw
Modular Mic Capsule Design
Oscillation mode:PLL(Digital frequency synthesizer)
Frequency stability： ＜ 30ppm
Dynamic range
：≥
100dB(A)
Frequency response： 50Hz-15KHz
Max input pressure
：
130dB SPL
Microphone pickup： Capacitive
The Mic capsule of the handheld transmitter adopts modular
design, which can facilitate users to configure different sound q-
uality Mic capsules to adapt to different occasions.
2.TechnicalParameters
System
power supply
：
2 AA Size Battery
Frequency ranges:4
7
0.2MHz~60
7
.
7
MHz
Modulation Mode:FSK
Available Band Width:500MHz
Channel number:100(or 200)
Channel spacing:250KHz
Frequency stabillity:±0.005%
Dynamic range:100dB
Peak deviation:±45KHz
Audio response:80Hz-15KHz(
±
3dB)
Comprehensive SNR:>105dB
Comprehensive Distortion:≤0.5%
Operating Temperature:-10℃~+40℃
B.System Components
All system include:
Receiver
Rack installation parts
Audio signal cable
1.5V AA Battery
2 Channel
1set
(2set)
(1set)
(4)
(
1set)
( ) ( )
2 or 4
(1)
4 Channel
(1set)
(2set)
(1set)
(8)
(1set)
(2)or(4)
(1)
8 Channel
(1set)
(none)
(1set)
(16)
(1set)
(4)
(1)
(
)
Power
Antenna
User Instruction
Transmitters System
(2set)
(4set)
(8set)
Handheld/Conference/Body Pack
2
3