Product Card

3
• Insert new high quality alkaline batteries into your transmitter.
• Utilize the exible output format of the receiver to match your
application. Connect to mixer or amplier appropriately.
• Power up the receiver.
• Power up the transmitters.
• The RF indicator light will show connectivity between the
receiver and the transmitter.
Operating Instructions
6
• Transmitter Switch
- Power on/off switch
- Mute on/off switch
• Power indicator light
• Battery life indicator light
Specications TXHGXLD Handheld
Operating Principle ................................................Moving coil dynamic
Capsule ..............................................................................CADLive
™
D38
Polar Pattern ...................................................................... Supercardioid
Frequency Response ..........................................................80Hz – 16KHz
Sensitivity ............................................................ -43dBV (6.8mV) @ 1Pa
Maximum SPL .................................................................................145dB
RF Transmitter Output .................................................................... 10mW
Modulation ................................................High Denition Digital QPSK
Power requirements ................ 2x AA alkaline or rechargeable battery
Battery Life ...............................................................>10 hours (alkaline)
Handheld TXHGXLD Transmitter
• On/Off, mute switch
• TB4M-type connector receives
TA4F-type terminated connection
• Battery compartment
• Antenna
• LED indicator light
Specications TXBGXLD Bodypack
Frequency Response ......................................................... 20Hz – 20KHz
Maximum Input Level
Microphone Input: ............................................. 1.5Vrms (5Vpp)
Instrument Input: ............................................... 1.5Vrms (5Vpp)
RF Transmitter Output .................................................................... 10mW
Modulation ................................................High Denition Digital QPSK
Power Requirements ............... 2x AA alkaline or rechargeable battery
Battery Life ............................................................... >10 hours (alkaline)
Bodypack TXBGXLD Transmitter
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.