WX3000 Wireless Microphone System Manual and Quick Start-up Guide ©2016 CAD Audio Part No.
Two-Year Limited Warranty CAD Audio hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs CAD Audio will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim.
Individuals with cardiac pacemakers and other similar medical devices should consult with their physician before using any RF devices. Though the output level of this wireless system is below 50 milliwatts, the proximity of the transmitter to the implant device could pose a threat. As with any wireless product, environmental conditions can reduce or in some cases prohibit a successful connection between the transmitter and the receiver. This device complies with Part 15 of the FCC Rules.
• • • • Simultaneous usage of up to 15 systems per frequency band Dynamic Range > 110dB AA Batteries with up to 15 Hrs of battery life Systems ship with rack ears single/dual BNC relocation kit and durable carry case • BodyPack systems include miniature E19 Earworn, E29 Lav, WXGTR guitar cable • XLR and ¼" outputs on receiver Using the DA4090 Distribution Amplifier to Simplify Multiple-System Installations 1. BNC 50 ohm cable. 2. Power cable. 3. Power adapter. Startup Guide 1.
Bodypack TX3010 Transmitter 1. Power/Mute button: hold for power, press for mute. 2. CADTone TB4M-type audio input connector. 3. Transmitting antenna 4. Power indicator 5. High-contrast display a) Operating frequency b) RF power indicator c) transmitter audio gain indicator d) mute indicator e) battery strength indicator 6. IR node for ScanLink 7. SET button. Unlocks advanced features. 8. UP arrow button. Use to adjust advanced feature menu items. 9. Battery compartment.
Receiver RX3000 (Front) 1. 2. 3. 4. 5. 6. Handheld TX3000 Transmitter Power button. IR ScanLink node. Use for linking transmitter and receiver. LINK button. Use to initiate TX-RX link. SET button. Unlocks advanced features. SCAN button. Use to initiate environmental frequency analysis. UP and DOWN buttons. Use to adjust advanced feature menu items. 2 1 4 3 7 6 1 2. Enclosed transmitting antenna. 3. IR node for Scan-LinkTM 4. Power/Mute button. Hold for power, press for mute. 5.
Simultaneous Use 580 - 600MHz Band R Group Channel Frequency 1 1 580.000 1 3 584.600 1 9 600.000 3 5 586.900 3 6 588.800 3 7 590.900 3 9 597.400 4 2 581.000 4 3 583.300 4 7 588.600 5 9 598.100 6 1 581.300 6 8 595.700 8 5 591.200 9 9 599.400 Simultaneous Use 655 - 679MHz Band S Group Channel Frequency 1 1 655.400 1 9 672.275 1 12 677.750 2 1 656.250 2 4 661.725 2 5 663.350 2 10 673.425 2 12 678.600 3 1 655.200 3 5 660.750 5 12 677.225 6 6 668.675 8 2 657.800 8 12 678.900 10 3 661.
655 - 679MHz Band S Channelization These frequencies have been approved for use within the United States and Canada as of the date of publication of this manual. It is the user’s responsibility to comply with local regulations. 580 - 600MHz Band R CH 1 2 3 4 5 6 7 8 9 CH 1 2 3 4 5 6 7 8 9 6 Group 1 580.000 582.200 584.600 586.600 588.500 590.600 593.500 596.500 600.000 Group 6 581.300 582.800 584.500 587.100 587.900 589.800 592.700 595.700 598.200 Group 2 Group 3 580.600 582.500 581.100 583.500 582.
