USER INSTRUCTIONS 57cm CHARCOAL MATE MODEL No.
1. Safety Information Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ GB This appliance is for outdoor use only. Warning - Use of this appliance indoors or in confined spaces may lead to an accumulation of toxic fumes resulting in serious bodily harm or death. Always use the appliance on a firm level surface. Observe a minimum distance of 1,5 meters from combustible materials. Do not make use of gasoline or any other type of highly volatile, flammable fluid to start a charcoal fire.
6. Accessories • Always use genuine CADAC spares as they have been designed to give optimum performance. Description Part No. Stainless Steel Drip Pan (Durable stainless steel drip pan keeps BBQ clean during indirect cooking) 98155 BBQ Cover.
7. List Of Items M10 Washer Qty:2 Outer leg Bracket Qty:3 M6x10 screw Qty:2 M10 Bolt Qty:2 Qty:2 M10 Nut Qty:2 M6x16 Screw Qty:3 Wheel Qty:2 Dome Handle Qty:1 Wheel Cover Qty:2 M6 Washer Qty:5 M6 Nut Airvent Lid Cooking Grid Charcoal Grid Bowl Handle Fire Bowl Leg Wire Tray Note the orientation of the handle when you are assembling the product.
8. Assembly 8.1 Getting Started • • Ÿ Begin by unpacking and laying out all of the components of the barbecue and ensuring that all of the items listed in Section 7 are there. Read the assembly instructions in full before starting assembly. PLEASE NOTE! Images may vary depending on the model you purchased 8.2 Tools Needed For Assembly • • Star screw driver. Size 10 spanner. 8.3.1 Steps to Assembling the Legs Ÿ Ÿ Ÿ Ÿ Place the fire bowl on the ground with the inner leg brackets facing up.
8.3.2 Steps to Assembling the Wire Tray Wire Tray Plastic Clip Wire Tray Plastic Clip NB!: Tighten the M6 screws attaching the legs to the fire bowl. Step 4 Step 5 8.3.3 Steps to Assembling the Grids Ÿ Ÿ Next, insert the charcoal grid into the fire bowl where it will rest on the location rim inside the fire bowl. Then fit the cooking grid into the fire bowl. (See step 7).
8.3.4 Steps to assemble the dome Ÿ Fit the handle to the lid by aligning the holes in the handle bracket with the holes on top of the lid. Secure in position using the M6 screws, nuts and washers supplied. M6 x 10 Screw Handle Lid M6 Washer M6 Nut Step 8 Ÿ The air flow through the lid can be regulated by adjusting the air vent, as shown in the illustration below.
9. Warrantee CADAC (Pty) Ltd hereby warrants to the ORIGINAL PURCHASER of this CADAC Charcoal Barbecue, that it will be free of defects in material and workmanship from the date of purchase as follows: Plastic parts: Enamel parts: Wire Grids : Aluminium Legs: 1 Year 5 Years No Warranty 2 Years The warranty will only apply if the unit is assembled and operated in accordance with the printed instructions. CADAC may require reasonable proof of your date of purchase.
