SKOTTEL BRAAI PAELLA BRAAI MODEL No 8309T-13 SKOTTEL BRAAI PAELLA BRAAI GRILL2BRAAI USERINSTRUCTIONS INSTRUCTIONS USER 503-0399 LEV10
CAUTION For Outdoor use only! This appliance may not be used in an exterior enclosed balcony, porch or entertainment area. IMPORTANT Read these instructions carefully so as to familiarise yourself with the appliance before use. Retain these instructions for future reference. 1. GENERAL Ÿ Ÿ Ÿ Ÿ This Appliance complies with BS EN 498:2012 and BS EN 484:1998 This appliance shall only be used with an approved hose and regulator.
. SAFETY INFORMATION Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Hose The hose must be checked for wear or damage before every use and before connecting to the gas container. Do not use the appliance if it has a damaged or worn hose. Replace the hose. Do not use an appliance that is leaking, damaged or which does not operate properly.
.1 EXPLODED VIEW SKOTTEL BRAAI PRODUCT CODE: 8309-10 PARTS LIST A. Skottel Dish C. F. G. H. J. K. L. M. N. O. P. Pot Stand Burner Pan Burner Stem Tripod Housing Control Knob Leg Valve Lock Nut Jet Valve Tailpiece Fig.
4.2 EXPLODED VIEW GRILL 2 BRAAI PRODUCT CODE: 8309-20 PARTS LIST B. Grill2Braai Grid C. F. G. H. J. K. L. M. N. O. P. Pot Stand Burner Pan Burner Stem Tripod Housing Control Knob Leg Valve Lock Nut Jet Valve Tailpiece Fig.
4.3 EXPLODED VIEW PAELLA BRAAI PRODUCT CODE: 8309-30 Q PARTS LIST Q. Paella Grid C. F. G. H. J. K. L. M. N. O. P. Pot Stand Burner Pan Burner Stem Tripod Housing Control Knob Leg Valve Lock Nut Jet Valve Tailpiece Fig.
5. ASSEMBLY INSTRUCTIONS Ÿ Note: The hose and regulator are not supplied. For details contact your local stockist. Fig.
7. USING THE APPLIANCE Caution: As accessible parts become very hot, the use of oven gloves is advisable. Keep young children away from the appliance. Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Assemble the tripod as described in Section 5 Place the Burner Pan (F) on the stem and tri pod assembly. Light the appliance as described in Section 8. For Skottel Braai Ÿ To prepare the Skottel Braai for use place it onto the Burner Pan (F) so that all three Locators (V) (Fig.
. GENERAL MAINTENANCE Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ This appliance does not require scheduled maintenance. Replacing a Blocked Jet: Your appliance is fitted with a specific size jet (O) to regulate the correct amount of gas. Should the hole in the Jet (O) become blocked, this may result in a small flame or no flame at all. Do not attempt to clean the Jet (O) with a pin or other such device as this may damage the orifice, which could make the appliance unsafe. To replace the Jet (O):.