Specifications

4-2 Mono input module 8411
S-Type Revision S2005-6
714 )URQW#SDQHO#0#PRQR#LQ SXW#F KDQQHO#PRGXOH#;744
71414 2VF LOOD WRU
Press this button to apply a line-up tone to the input. The frequency and level of the
line up tone is set from the Stereo output, Comms, Osc & Talkback module 8414.
71415 ,QSXW#JDLQ
This rotary control adjusts the MIC input gain between +10dBu and +60dBu.
71416 053G% #SDG
Pressing this button applies a -20dBu pad to the MIC input to accommodate for line
level sources @0dBu (0.775V).
71417 3KDVH#UHYHUVH
Press this button to reverse the phase of the incoming signal.
71418 7;9#3KDQWRP#SRZHU
Press this button to switch on 48V phantom power to any connected microphone,
Please note that the 48V phantom power is disabled on this channel if the OSC
switch is selected.
4.1.2 Input gain
4.1.5 Phantom power 48V
4.1.7 Direct output level control
4.1.11 PAN-control
4.1.1. Oscillator
4.1.3 -20dBu PAD
4.1.4 Phase reverse
4,1.6 Direct output select
4.1.8 Sub-Group routing
4.1.9 Stereo
4.1.10 Pan