Manualshelf

2D CAD

ManualsBrandsCadco ManualsCommercial Cooking EquipmentBakerlux GO Panel Heavy-Duty Countertop Convection Oven with Digital Controls, Stainless Steel/Black, NSF, 120v, Stainless/Black
12
CONTINUOUS RUN SETTING
Press START / STOP Button to activate control board.
Press desired PROGRAM button P1 - P12. (Then, to access P13-
P99, press until desired program appears.)
Press PRE button repeatedly until PRE [Preheat] LED
lights up.)
Set PREHEAT TEMPERATURE by pressing /
, or use
the slider bar until desired temperature appears.
Press 1 button once (1 LED will light)
Set TIMER by pressing / , or use the slider bar until
desired time appears.
PROGRAM QUICK ACCESS BUTTONS
Set COOKING TEMPERATURE by pressing /
until desired temperature appears.
(Optional - for humidity; otherwise skip to 11)
In LED models, press HUMIDITY button once.
Press START / STOP Button.
Press TIMER button until 000 is on the screen..
Press Button until INF appears on the LED screen.
1
2
3
4
5
6
7
9
8
1
2
3
10
To access COOKING TEMPERATURE, press button once.
SAVE the program by holding down the corresponding program
number button for 3 seconds until you hear the beep.
11
Set HUMIDITY by pressing / until desired humidity %
appears (from oFF to 100% in 20% increments.)
Press and hold START / STOP Button for 2-3 seconds.
Press START / STOP Button to activate control panel.
Press button once.
1
2
3
4
5
6
7
Set HUMIDITY by pressing or until desired humidity %
appears (from oFF to 100% in 20% increments.)
Set COOKING TEMPERATURE by pressing / , or use
the slider bar until desired temperature appears.
(Optional - for humidity; otherwise skip to 7.)
In LED models, press HUMIDITY button once.
Press START / STOP Button to start the cooking cycle.
While a program is running, you may press / to
add or subtract time. This will not affect a saved program.
See instruction manual for additional options & information
ADDING or SUBTRACTING PROGRAM TIME
Press START / STOP Button to activate control board.
Press desired PROGRAM button P1 - P12. (Then, to access P13-
P99, press until desired program appears.)
1
2
Press START / STOP Button to start program.
3
STARTING A PROGRAM
STOP A PROGRAM IN PROGRESS
MANUAL OPERATION
2
Press TIMER button until the TIME is on the screen.
1
Press TIMER Button. This will allow you to set a time.
8
PRE
1
P1 - P12
P1 - P12
P1 - P12
BAKERLUX
TM
GO & LED OVENS QUICK START GUIDE
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
STOP
START
Set TIMER by pressing / , or use the slider bar until
desired time appears.
(For continuous run, press until INF appears on LED screen.)
3/28/2018 RV00

Summary of content (2 pages)