BAKERLUX SHOP.Pro™ GO BAKERLUX SHOP.
BAKERLUX SHOP.Pro™ Dear Customer, We thank you for having purchased an oven / complementary accessory from the BAKERLUX SHOP. Pro™line. These ovens are the result of Unox's research and warranty minimum occupation of space with excellent performance while offering outstanding cooking management under any condition of use and load. The BAKERLUX SHOP.Pro™ ovens use UNOX's finest patented technology, which is the result of collaborations with master chefs and the world's leading research institutions.
BAKERLUX SHOP.Pro™ INDEX SAFETY REGULATIONS FOR USE ...................................................................................4 GENERAL OPERATING INSTRUCTIONS .........................................................................5 Cooking/leavening advice ............................................................................................................................................. 5 USE: THECONTROL PANEL ............................................................................
BAKERLUX SHOP.Pro™ Safety regulations for use - Following procedures other than those indicated in this manual to use and clean the appliances is considered inappropriate and may cause damage, injury or death; in addition to invalidating the warranty* and relieving UNOX of all liability. - Children must not play with the appliance. Cleaning and maintenance to be implemented by the user must not be carried out by children without supervision.
BAKERLUX SHOP.Pro™ General operating instructions Before using the appliance carefully read the section “Safety regulations for use” - When using the appliance for the first time, be sure to clean the inside of the oven cavity and the accesso- ries thoroughly (see page 16); let the oven run empty at maximum temperature for 1 hour to eliminate any unpleasant odours caused by protective factory grease.
BAKERLUX SHOP.
BAKERLUX SHOP.Pro™ Use: some concepts MANUAL AND AUTOMATIC COOKING The oven you purchased can carry out either manual or automatic cooking. During manual cooking, the user, based on experience, must set the following cooking parameters for one or more cooking steps (up to a maximum of three): cooking time (in hours.minutes); temperature in the oven cavity (°C); steam input (only LED version ovens); fan speed (only LED version ovens).
BAKERLUX SHOP.Pro™ Manual cooking During manual cooking, the user, based on experience, must set the following cooking parameters for one or more cooking steps (up to a maximum of three): cooking time (in hours.minutes); Oven cavity temperature (°C) steam input (only LED version ovens); fan speed (only LED version ovens). After setting the cooking parameters (duration, temperature, etc.
D STARTING COOKING/SAVING COOKING After having set the cooking parameters (duration and time), you can: - directly start the cooking: at the end of cooking the set parameters will NOT be saved; - save the set cooking and then start cook- ing: at the end of cooking, the set pa- rameters are saved and the recipe can be used again subsequently whenever need- ed without having to pre-set the parame- ters each time.
GUIDED USE PROCEDURE (LED VERSION) A SELECT THE APPLIANCE 1 B C A Select the "OVEN" icon: the control pan- el is now enabled to use this appliance. SET PREHEATING (OPTIONAL) 2 Select the "PRE" icon if you want to set a preheating. 3 Set the desired temperature value for the preheating (we recommend a tem- perature that is 30°C more than the temperature used for cooking). 1 B SETTING COOKING PARAMETERS 4 2 Select icon "1": it is now possible to set the parameters of cooking STEP "1".
E START/SAVE COOKING After having set the cooking parameters (duration, time, etc...), you can: - directly start the cooking: at the end of cooking the set parameters will NOT be saved; - save the set cooking and then start cooking: at the end of cooking, the set parameters are saved and the recipe can be used again subsequently when- ever needed without having to pre-set the parameters each time.
BAKERLUX SHOP.Pro™ Automatic cooking During the automatic cooking, recipes pre-set by the Manufacturer (if provided) or previously stored by the user after setting them manually are used (see previous pages). The oven can hold up to 99 recipes (from P1 to P99). To return to "manual cooking" mode, after pressing any "P" button, you have to press the same button again; For example, if I press P1 to enter "automatic cooking" mode, pressing P1 again will return to "manual cooking" mode.
CHANGING A SAVED RECIPE GO model 2 1 Press the button correspond- ing to the program to be mod- ified (in the example, P7): the LED starts flashing. Note: to select positions from P12 to P99, press P12 (it will start flashing), press the "+" key repeatedly until the screen shows the desired position, press it for 5 seconds. to save the recipe. 2 Select the step to be mod- ified (the example shows STEP "1"). the parameter to be modified (the example shows the temperature).
BAKERLUX SHOP.Pro™ Using the prover (only the LED version) Your BAKERLUX SHOP.Pro™ LED version appliance can control a prover of the same series, connected thereto. A SELECT THE APPLIANCE A 1 Select the "PROVER" button: the control pan- el is now enabled to use this appliance. B SETTING LEAVENING PARAMETERS 1 2 Select the "CLOCK" button to set the leaven- ing cycle time. 3 Set the desired value in hours.minutes (the example shows 5 hours and 30 minutes).
BAKERLUX SHOP.Pro™ Alarms The ovens show alarm/warning messages relative to the oven or installed accessories (only LED version) on the screen. The warning messages (WARNING) signal malfunctions that nevertheless allow the appliance and accesso- ries to operate, though with a restricted set of functions. The alarm messages (ALARM) identify situations that fail to allow any appliance/accessories operation whatsoever, and therefore must be put into STOP mode.
BAKERLUX SHOP.Pro™ Ordinary and after-sales maintenance Any routine maintenance procedure must be performed: - after disconnecting the appliance from the power and water supplies; - after having put on the proper personal protective equipment (gloves, etc.). Clean the oven cavity daily to maintain proper levels of hygiene and to keep the stainless steel inside the oven cavity from getting ruined or corroding.
AFTER-SALES ASSISTANCE In case of any malfunctions, disconnect the appliance from its power and water supply. Consult the solutions proposed in the table. XEFT-04EU-xx Pe: 6,3 kW 220-240V 1N˜220-240V 3˜/380-415V 3N˜50/60 Hz 150-600 kPa IP X3 GROSS WEIGHT: 62 kg NET WEIGHT: 50 kg 06-2017BakerLuxTM S/N 1 3902067143 MOD. 3902067143 INT: LI2293A0 Subject to- Made by: UNOX S.p.A. Via Majorana 22, 35010 Cadoneghe - Padova (ITALY) Malfunction The oven is completely switched off.
INACTIVITY During periods of inactivity, take the following precautions: - disconnect the appliance from the power and water supplies; - rub a soft cloth lightly doused with mineral oil on all stainless steel surfaces; - keep the appliance door slightly ajar.