User Manual

CHANGING A SAVED
RECIPE
1
Press the button correspond- ing to
the program to be mod- ified (in the
example, P7): the LED starts
flashing.
Note: to select positions from P12
to P99, press P12 (it will start
GO model
2
4 3
flashing), press the "+" key re-
5A
5B
peatedly until the screen shows the
desired position, press it for 5 seconds.
to save the recipe.
2
Select the step to be mod- ified
(the example shows STEP "1").
3
Select the parameter to be
modified (the example shows the
temperature).
4
Insert the new value (the ex-
1
LED model
2
5
sec.
5 sec.
ample shows how the tem-
perature is brought from
4
180°C to 200°C).
Now you can:
1
5A
overwrite the modified pro- gram.
press the same key e.g. P7 for 5
seconds (the existing recipe is
deleted irreversibly). In the example:
5B
5 sec.
5B
5 sec.
P7: program with temperature set to 200°C (instead of 180°C as previously set).
5B
save a new program identical to the initial program (e.g. P7), except for the changes made (in the ex- ample, a change to
the temperature).
Press the button for the desired position again (e.g. P8) and hold for 5 seconds:if the name is shown in red, this means that
t h e p o s i t i o n i s a l r e a d y o c c u p i e d . I f y o u c h o s e t h e p o s i t i o n a n y way, this will overwrite the existing recipe, permanently deleting it.
In the example:
P7: program with temperature set to 180°C
P8: program identical to P7, except the STEP 1 temperature has been set to 200°C.
PRE STEP 1 STEP 2 STEP 3
Pos. Recipe name
13
3