User Manual

ManualsBrandsCadco ManualsCommercial Cooking EquipmentBakerlux GO Panel Heavy-Duty Countertop Convection Oven with Digital Controls, Stainless Steel/Black, NSF, 120v, Stainless/Black

STARTING COOKING/SAVING COOKING

After having set the cooking parameters (duration

and time), you can:

directly start the cooking: at the end of cooking

the set parameters will NOT be saved;

save the set cooking and then start cook- ing: at

the end of cooking, the set pa- rameters are

saved and the recipe can be

used again

subsequently whenever need-

ed without having

to pre-set the parame- ters each time.

Directly start cooking

Press the “START/STOP” icon: cooking starts

with the set parameters and all the red LEDs

of the positions turn off.

Save cooking and then start it

If you want to save the recipe before starting it,

search for a free position by looking at the LEDs:

free position: LED not turned on (e.g. P7) occupied

position: LED turned on (e.g.. from P1 to P6),

however, if you select this although it is

occupied, you will over- write the recipe

already found and will delete it irreversibly.

Note:

to select positions from P12 to P99, press

P12 for 5 sec. (it will start flashing), press the "+"

key repeatedly until the screen shows the

desired position, press it for 5 seconds. to save

the recipe.

Press the selected button for

5 sec- onds

: you

will hear an acoustic signal indicating that the

cooking is saved.

Press the "

START/STOP

" icon to start cooking.

COOKING IN PROGRESS!!!!

If the cooking requires a pre-heating, the oven starts to heat the oven cavity to bring it to the set temperature (in the example

192°C). DO NOT place the dishes in the oven during this phase.

At the end of the preheating, the oven emits a beep and the oven LED light flashes: it is time to cook the dishes. When the

door is closed, STEP 1 automatically starts according to the set parameters.

During cooking the set parameters are seen on the screen when the icon of interest it touched: shows the

set cooking time alternating with the time remaining until the end of cooking;

shows the set oven cavity temperature alternating with the current temperature.

The set temperatures can be changed at any time by acting as explained on the previous page (points

from

). Cooking ends at the end of the set time, if you want to interrupt cooking before the

end of the set time, hold down the "

START/STOP

" button.

COOKING END

At the end of the cooking, the oven emits an acoustic signal and the oven light flashes: the dishes are ready. The light turns

off when the door is opened.

5 sec.