Installation manual

GE Security

Special formats

LOCATION 18 - CUSTOM COMMUNICATOR FORMAT (see locations 2, 8, and 14)

Segment 1

1 = On for 1800hz transmit; Off for 1900hz

2 = On for 2300hz handshake; Off for 1400hz

3 = On for checksum parity; Off for double round parity

4 = On for 2 digit event code; Off for 1 digit event code

5 = On for extended reporting; Off for non-extended reporting

6 = Reserved

7 = On for 20 PPS; Off for 10 or 40 PPS

8 = On for 10 PPS; Off for 20 or 40 PPS

Segment 2

1 = On for pager format (no handshake required).

2 = On for 1400/2300 handshake

3 = Reserved

4 = Reserved

5 = On for Contact ID

6 = On for SIA

7 = On for 3 digit event code

8 = On for DTMF

Segment 3

Reserved

Segment 4

Inter-digit time for pulse format:

The inter-digit time is the value programmed on this location, divided by

the pulse-rate (PPS) of the programmed format. This is programmed in a

binary way: in order to program the value “10”, options 2 and 4 must be

selected, for value “5”, options 1 and 3 must be selected.

Ex: when the value 10 is programmed on segment 4 and a pulse format

of 20 PPS is used, the inter-digit time is 10/20 = 0.5 sec.

NX-4-EUR Installation manual Page 39 08/09/04