Installation manual

GE Security

The NX-4 can report Ademco Contact ID transmissions. Each report in Contact ID consists of an Event Code

and a Zone ID. The zone ID is the zone that generated the alarm. The event code will come from the chart

below, and it will be programmed in the configuration group event code.

Programmed Event Code CONTACT-ID Description

0 122 Silent Panic

1 110 Fire Alarm

2 120 Panic alarm

3 130 Burglary Alarm

4 131 Perimeter Alarm

5 132 Interior Alarm

6 133 24 Hour Burglary

7 134 Entry Alarm

8 135 Day/Night Alarm

9 150 Non Burglary 24 Hour

10 121 Duress Alarm

11 100 Medical Alarm

12 123 Audible Panic Alarm

13 137 Tamper Alarm

14 602 Periodic Test

15 151 Gas Detected

16 158 High Temp

17 154 Water Leakage

18 140 General Alarm

19 140 General Alarm

20 159 Low Temp

21 158 High Temp Alarm

22 115 Manual Fire Alarm

NX-4-EUR Installation manual Page 88 08/09/04