Operating Instructions and Installation Instructions

22
VEGA - SIRE
3
PLUS - DOGE
3
PLUS - SFERA
3
- SFERA
3
PLUS - PRINCE
3
- PRINCE
3
PLUS - GLOBE - TREND - ELISE
3
PLUS
EN
Fig. 42 - Electric socket with master switch
• The master switch O/I (see Fig. 42 page 22) is to open only to switch the stove on, otherwise it is advisable
to keep it off.
• Do not use extension cables.
• If the feeder cable is damaged, it must be replaced by an authorized technician.
• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the
socket on the wall.
11.10 CONNECTION TO THE EXTERNAL THERMOSTAT
The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an
external room thermostat. This operation must be executed by an authorized technician.
• External thermostat: "SET TEMP ROOM" a temperature which is round 7°C.
• External chronothermostat: "SET TEMP ROOM" a temperature which is round 7°C and desable the chrono
functions from the menu 03-01 "CHRONO ENABLE" ("OFF").
11.11 VENTILATION
• The stove is endowed with a ventilation system.
• The air blown from fans keeps the appliance at a low temperature range in order to avoid high stresses to the
materials which make it up.
• Do not cover the hot air outlet slits with any object to avoid stove’s overheating!
• The stove is not suitable for food cooking.
Fig. 43 - Do not cover air slits
11.12 HOT AIR DUCTING SYSTEM (VEGA / TREND / SIRE
3
PLUS / DOGE
3
PLUS / SFERA
3
PLUS /
ELISE
3
PLUS / PRINCE
3
PLUS MODELS)
The stove is tted with 1 hot air outlet.