Operating Instructions and Installation Instructions

AQUOS - IBIS - IDRON

• One contains the ceramics (Fig. 12 page 20). In this case there will be a single pack for the structure (the

box with the ceramics will be placed on top of the pack with the structure).

Fig. 11 - Example of stove + steel sides packaging Fig. 12 - Example of ceramics packaging

Open the pack, remove the four screws that secure the base of the stove to the pallet, two to the right and two

to the left (see Fig. 13 page 20) and position the stove in the selected place, ensuring that it complies with the

above instructions.

Fig. 13 - Removal of packaging screws

The stove body or unit must always be kept in a vertical position when handled and moved by using carts

only. Pay particular attention to the door and its glass, protecting them from mechanical knocks that would

compromise their integrity. Always handle the product with care. If possible, unpack the stove near the chosen

place of installation.

The packaging materials are neither toxic nor harmful, and therefore no particular disposal measures are

required. Therefore, the end user is responsible for product storage, disposal or possible recycling in compliance

with the relative applicable laws.

Do not store the stove unit or its cladding without their packaging.

Position the stove without its cladding and connect it to the ue pipe. Use the four adjustable feet (J) to get

the stove correctly levelled so that the smoke outlet (S) is lined up with the connecting pipe (H). Once the

connection operations are complete, assemble the cladding (ceramics or steel sides).

If the stove needs to be connected to a discharge pipe which goes through the rear wall (to then connect to

the ue), take utmost care not to force the joint.