Specifications

FINAL SYSTEM CHECK
11
Adjusting the System:
Once you are certain that all the wiring is correct and that the unit turns properly you are ready to adjust the audio section.
1. Disconnect the amplifiers remote turn on leads.
2. Adjust all the amplifier gains to minimum.
3. Turn the master volume of the CEQ-783 to maximum.
4. Turn the volume of your head unit to maximum and then down a drop.
5. Switch on any secondary sound source you may have hooked into the CD / Headunit inputs of the CEQ-783. Now ad
just the input level controls found on the top of the unit chassis.
6. Reduce the master volume of the CEQ-783 and reconnect the remote turn on leads to the amplifiers.
7. Restart the system and increase the volume of the CEQ-783 to your desired listening pleasure.
8. The CEQ-783 should be able to run the system even with the amplifier gains set to minimum. If you can not reach your
desired listening level you may raise the amplifier gains. Setting amplifier gains unnecessarily to maximum can cause
noise problems in your system.