Installation Guide

Place the faucet assembly (A) through the
selected hole in the sink or countertop.
On the underside of the sink or countertop,
slide the rubber washer (B) and ABS
mounting (C) onto the stud. And tighten
securely using your wrench.
Thread the quick connect adaptor (E) onto
the end of the faucet assembly (A) stud,
and tighten securely using a wrench.
Water line from the filtration system by
pushing the line into the connector (D).
Pull down on the line slightly to ensure
the quick connect fitting has engaged.
Water line from
filtration system
A
D
A
B
C