Specification Sheet

Safe, durable, and powerful—the Register heater
operates quietly with outstanding warm air circulation. A
grill design similar to most central system air vents makes
it a perfect t in any room.
ARCHITECTURAL - ENGINEERING INFORMATION
Fan forced up ow electric air heaters are ETL listed, factory rated at
120V, 208V or dual eld rated 208V/240V. A powder coated 20 gauge wall
mounting can with four knockouts is provided with each complete heater.
The element and blower are of unitized construction and attach to the
wall can with a single screw. Element construction is a coiled nichrome
heating wire sealed in a steel sheath with steel ns brazed to the sheath,
nished with a high temperature paint to prevent rust and corrosion.
A manual reset, 25 amp rated, at 240V, thermal overload limit switch is
standard. A tangential cylindrical blower delivering approximately 40
to 55 CFM is driven by an impedance protected motor with permanently
lubricated vibration isolated with dust sealed bearings. Metal grill is of
one piece construction and nished with a powder coated paint system.
TECHNICAL INFORMATION
UL safety standards require the heater to be placed a minimum distance
of 6 inches (15.2 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm)
from the oor. Cadet recommends a 12-inch clearance from all surfaces
for longer and cleaner performance. A 3-foot (91.44 cm) minimum
clearance is required for furniture or other objects placed directly
in front of the heater. This model is not approved for ceiling installation.
Electric wall heaters and thermostats work best when installed on an
inside wall. We recommend installing the heater assembly after walls
are nished. Heater must be cleaned every six months minimum.
A thermostat is required. For optimal comfort use an electronic
wall stat. These models work best at elevations under 7500 feet.
RegisteR
Powerful performance
for any room
cadetheat.com
855.CADET.US
Vancouver, Washington
USA
M
A
D
E
I
N
T
H
E
• Enjoy complete warmth,
thanks to a powerful air fan
• Vent-style grill blends in
with any décor
• Rest easy—includes high-
temperature safety shutoff feature
• Pre-formed, bendable legs make
mounting and installation easy
• Offers xed and multi-watt
capabilities
• One-screw mounting for fast
installation into the recessed
wall can
• Count on years of reliable
operation with a heavy-duty steel
heating element and blower
tested to UL
standards