Specification

Garage / Workshop heater

• Powerful fan with 300 cfm output, and 4000

watt, stainless steel heater element

• Versatile mounting bracket attaches to wall or

ceiling – heater swivels and tilts to direct heat

• Automatic thermostat temperature control

helps maintain consistent temperature from

41-109ºF ( 5-43ºC )

• Fan delay uses residual heat to save energy

and maintain temperature

• Includes 6-foot cord with NEMA standard

plug (6-20P)

• Power interrupt safety shutoff for overheat

protection

Glen Dimplex Americas │ 1-855-223-3887 │ www.cadetheat.com

UPC/PART MODEL DESCRIPTION WATTS VOLTS AMPS BTUS WEIGHT

027418 10296 6 CGWH4031G Cadet Garage/Workshop Heater 4000 240 16.7 13,650 15 lbs/6.8 kg

Product Dimensions:

9" W x 11" H x 7 ½" D

22.9 cm x 27.9 cm x 19.1 cm

Q2 2019

* Bracket can

attach to wall

or ceiling

Tough, rugged, high performance heat that installs

neatly on the wall or ceiling with the included

bracket.

TECHNICAL INFORMATION

The heavy duty CGWH 240-volt heater includes a smart fan-delay

feature that waits for the element to heat up, and keeps the fan on

until the element cools down. All units include a built-in double pole

thermostat, mounting bracket, power indicator and warning lights.

UL safety standards require a 3-foot minimum clearance from the

front. For best performance, the heater should be located along

outside walls and the warm air should blow away from or parallel to

the walls.

The safety shutoff is reset by unplugging the heater, waiting for 5

minutes and then plugging it back in.

ORDERING INFORMATION

Standard color for the Garage/Workshop heater is grey with a

powder coating that resists fading and abrasion. Includes a 6-foot

cord with polarized plug.

CGWH4031G requires a NEMA 6-20 receptacle and a 20-amp

circuit for operation. Please check your receptacle and/or with your

electrician before purchase.

Purchase hardware for installation separately.