Install Instructions

IMPORTANT INSTRUCTIONS
HEATER OUTLET
TOOLS REqUIRED:
•
Phillips Screwdriver
•
Wire Connectors (not included)
WARNING
TURN OFF THE CIRCUIT BREAKER
SUPPLYING POWER TO THE HEATER
BE FOR E IN STAL LIN G TH E LOAD
TR ANS FER SWITC H (LTF ). LO CK,
TA P E, OR TAG THE CIRC UIT
BREAKER PANE L DOOR O R FUS E
BO X. FAIL U RE TO D O SO C OULD
RESULT IN SERIOUS ELECTRICAL
SH OCK, BU RNS, OR PO SSIB LE
FATALITY!
1. Read all instructions before using this heater and load
transfer plate.
2. All electrical work and materials must comply with the
National Electric Code (NEC), the Occupational Safety and
Health Act (OSHA), and all state and local codes.
3. If you need to install a new circuit or need additional wiring
information, consult a qualified electrician.
4. Check that the circuit breaker and wiring is for a 20 amp rating.
5. The LTF-240 is only approved for installation on CADET
brand baseboards.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and
injury to persons, including the following:
Features & Benefits
•
Conveniently uses one circuit to operate either a
baseboard heater or A/C unit.
SAVE THESE INSTRUCTIONS
cadetheat.com Tel: [phone] P.O. Box 1675 Vancouver, WA 98668-1675
©2014 Cadet Printed in U.S.A. 12/14 #720031
Load Transfer Plate LTF-240
Installation Instructions
http://www.cadetheat.com/products/baseboard-heaters/baseboard