Cut Sheet

Features and Benefits
• Primary and Secondary Thermal Safeguards
- Commercial grade high temperature manual reset
- Over temperature one-time thermal device
• Commercial grade steel element
• Powder coat paint process eliminates sharp
metal edges
• Wall can designed for quick installation with
mounting legs that minimize measuring time
General Information:
The Register™ Plus is Cadet's premier fan forced heater line and is
often chosen for its similar appearance to central system register
vents. Models are offered with both fixed and multi-watt capabilities
(multi-watt models factory preset at their maximum wattage). A large
squirrel cage blower quietly provides increased airflow allowing for lower
surface and air-at-surface temperatures. Cadet recommends a wall-
mounted thermostat for optimum performance, or you may prefer the
convenience of an optional field mount thermostat kit.
Architectural Information:
Fan forced electric air heaters shall be UL Listed, factory rated at 120V,
208V, or dual field rated from 208V to 240V. A 20 gauge wall mounting
can with four knockouts shall be provided with each complete heater.
The element and blower shall be of unitized construction and shall
attach to wall can with a single screw. Elements shall be steel-finned
type, with an oversized 25 amp rating at 240V high temperature
manual reset limit switch and an over-temperature thermal backup.
A tangential cylindrical blower delivering approximately 60 CFM (RM202),
and 50 CFM (RM162 and RM151) shall be driven by an impedance
protected motor with permanently lubricated, vibration isolated, dust
sealed bearings. Metal grill shall be of one piece construction and
finished with a powder coat paint system.
The Register
™
Plus
The premier choice for all rooms
The Register
™
Plus
HEATER ASSEMBLY WALL CAN
Heat Box Only Carton
DIMENSIONS 12"W x 7.5"H x 5.25"D
PALLET QTY. 100
CUBE .27
Complete Unit Carton
DIMENSIONS 14"W x 9.5"H x 5.75"D
PALLET QTY. 96
CUBE .44
Carton Details