Instructions / Assembly

English is the default. For French:
1. Press + and
_
at the same time
2. Press M. M T W T F S S will ash
3. Press + or
_
to change to L M M J V S D
4. The days of the week blink for 6 seconds then display returns to normal
Celsius is the default. For Fahrenheit:
1. Press + and
_
at the same time
2. Press M twice. °C will ash
3. Press + or
_
to change to °F
4. The icon blinks for 6 seconds then display returns to normal
Convection (baseboard) heating mode is the default.
For fan-forced heaters:
1. Press + and
_
at the same time
2. Press M 3 times. will ash
3. Press + or
_
to change to
4. The icon blinks for 6 seconds then display returns to normal
DEFAULT & TIME SETUP (COMPLETE BEFORE PROGRAMMING)
PROGRAMMING (AFTER SETUP IS COMPLETE)
OFTEN USED
DISPLAY
Time
Time format
Standby (OFF)
Days of the week
(English/French)
Heat Mode
Fan or Convection
(includes baseboard)
Quick Modes
(Early Start, Vacation, Comfort, Economy)
Lock
Temperature
Display
Temperature
Programmed Event
(Wake Up, Away,
Arrive, Sleep)
Temporarily Change Set Temperature
The large numeric display shows the current room temperature.
1. Press + or
_
to temporarily change the temperature
2. The display blinks for 6 seconds then returns to normal
HO Ld
now appears where the time is displayed. The next scheduled
program event will override this temporary setting.
Turn OFF (Standby)
1. Press + and
_
at the same time
2. Press M 4 times. will ash
3. Press + or
_
to activate
4. The icon becomes steady and the temperature display turns blank.
When enabled, only the icon remains visible on the screen.
To disable, press and hold + and
_
until the screen activates. The display
blinks and may show 99.
99
before it returns to normal.
IMPORTANT!
Remove the protective lm off the front of the thermostat before use.
Moderate pressure must be applied to the center of each button to operate. Don’t leave your nger too close to the
screen between each touch or the thermostat may react to an unintended touch.
TEP SERIES PROGRAMMABLE THERMOSTATSTEP SERIES PROGRAMMABLE THERMOSTATS
QUICK START SETUP & PROGRAMMING GUIDEQUICK START SETUP & PROGRAMMING GUIDE
TEP302DW, TEP362DW TEP402DW
Note: See the User’s Guide for complete installation instructions, additional options including a locking function,
additional daily modes for vacation, comfort, energy savings, and other important operating and safety instructions.
Set Time and Day Display. Default is 12:01
AM
Monday.
1. Press + and
_
at the same time
2. Press M 6 times. 12hr will ash; if okay, press ü and skip next step
3. Press + or
_
to change to 24hr if desired, press ü
4. 88:88 will ash. Adjust hours using + or
_
to the correct hour and AM
or PM, then ü
5. 88:88 will ash. Adjust minutes using + or
_
then press ü
6. M T W T F S S will ash. Adjust the day using + or
_
then press ü
5 - 2 Programming Setup
tip: Plan and write down your weekday and weekend schedule times before
you start programming.
Setup begins with Wake Up [ ] time for your 5 weekdays and goes all the
way through weekend programming in one sequence.
1. Press M. The Wake Up icon and M T W T F are on screen
2. 88:88 hours will ash. Adjust using + or
_
then press ü
3. 88:88 minutes will ash. Adjust using + or
_
then press ü
4. The temperature will ash. Adjust using + or
_
5. [ ] is now programmed. Press ü.
Immediately repeat steps 2 through 5 to program Away [ ], Return [ ],
and Sleep [ ] for your 5 weekdays. When weekday programming is
complete, days of the week switch to S S and hours ash to begin weekend
programming with Wake Up.
Don’t hesitate between steps—if you wait more than 8 seconds, the
thermostat returns to the main screen and you will need to start over!
To completely reset the thermostat to factory settings,
press and hold M for 10 seconds.
Glen Dimplex Americas
Telephone: 1-888-346-7539
|
www.cadetheat.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2022 Glen Dimplex Americas LI-1058-R00-021722
A BRAND OF GLEN DIMPLEX AMERICAS

Summary of content (1 pages)