Installation Guide

cadetheat.com Tel: 855.CADET.US PO Box 1675 Vancouver, WA 98668-1675
Benets You Can Depend On
SAVE THESE INSTRUCTIONS
UCT Built-In Thermostat Kit
Installation Instructions
IMPORTANT
TOOLS
REQUIRED:
Phillips
Screwdriver
(3) or (4)
Insulated Wire
Connectors
Optional built-in temperature control for your
Cadet Perfectoe model UC undercabinet
heater
Easy to use adjustable dial
Available with white or black knobs to match
your heater grill
Use with 120 or 240 volt Cadet Perfectoe
model UC undercabinet heaters
Available in single (2 wires) or double (4
wires) pole
22 amp maximum rating
Your UCT built-in thermostat is guaranteed
with a limited 1 year warranty
1. Read all instructions before installing or using
this thermostat.
2. High temperatures may be generated under
certain abnormal conditions. Do not partially or
fully cover or obstruct the front of the heater.
3. Do not operate any heater after it malfunctions.
Disconnect power at service panel and have
heater inspected by a qualied electrician before
reusing.
4. To disconnect heater, turn controls to off or
low, and turn off power to heater circuit at main
disconnect panel.
5. Do not insert or allow foreign objects to enter
any ventilation or exhaust opening as this may
cause an electric shock or re, or damage the
heater.
6. To prevent a possible re, do not block air
intakes or exhaust in any manner.
7. A heater has hot and arcing or sparking parts
inside. Do not use it in areas where gasoline,
paint, or ammable vapors or liquids are used or
stored.
8. Do not use outdoors.
When using electrical appliances, basic precautions should always be followed to reduce the risk of re,
electric shock, and injury to persons, including the following:
Single Pole Thermostat Models:
UCT1W, UCT1B
Double Pole Thermostat Models:
UCT2W, UCT2B
Single pole or double pole thermostats may be
used with both 120 or 240 volt service.
Page 1

Summary of content (2 pages)