User's Manual
14
6. SmartNODE Configuration
The SMN-890 can be configured through serial or Web interface. The serial configuration format is as described
below;
6.1 Serial Configuration
The Serial settings are;
a. Baud Rate = 57600
b. Data bits = 8
c. Parity = none
d. Stop bits = 1
Each configuration string consists of;
1. Command Code (CC)
2. Equal Sign ‘=’
3. Parameter Value
4. Carriage returns <CR>
Command Code ( cc ) ‘ = ‘ ASCII 3D Parameter
Value
<CR> ASCII 13
Command Code 2 letter Command Code in ASCII
‘ = ‘ Letter code indicate this is configure packet
Parameter value Data to Set SMN890
<CR> Carriage return as line terminator