User manual

How to Use Cadi.Sense Cadi.Sense User Manual
T-S1-800.900-I10-A01 9
*If the Cadi.Sense application does not launch, your router may not be uPNP enabled by
default, you may need to refer to your router’s user manual on how to enable uPnP.
Alternatively, please refer to “Appendix A: More about Manual Port forwarding”.
To access Cadi.Sense wireless temperature reading using Mobile App
Please check out the iPhone App Store or the Android Market to download "CadiSense"
journal app. On the KidiSense app, click on "Settings" tab to enter your ThermoSensor ID and
click on the "Monitoring" tab to monitor the temperature. Please check out
http://www.cadisense.com for the release dates of these apps.
How to use Cadi.Sense Application
Go to Temperature Monitoring Page – Click this to display the page that monitors
the readings of one sensor (or the last sensor added).
Go to Sensor Selection Page – Click this to list all the registered sensors in one page.
Refresh – Click this to refresh the page to get the latest temperature. All pages will
refresh automatically every 5 minutes.
Go to Advanced Settings – Click this to bring you to the page that lists all the
advanced settings that advanced users may need. Please refer to
www.cadisense.com for more details.
Set Date/Time – Click this to set the current time in the if the date and time is
wrong (due to no access to the internet or unable to get any date and time from
computer devices).
Add ThermoSensor – Click this to add a new ThermoSensor if there is more than one
child that requires temperature monitoring
Remove ThermoSensor – Click this to remove a ThermoSensor when you are no
longer using the ThermoSensor. Please note that by doing this, you will delete all
data of the ThermoSensor.
Sensor Settings – Click this to set a Nickname of the person wearing the
ThermoSensor, to turn On or Off pop out message alert when the temperature
exceeds a threshold and to set the high temperature threshold (Default: 37.8
degree Celsius)
Temperature Chart Page – Click this icon to display the continuous chart. The
continuous chart will appear only when there are enough readings to plot a
readable chart. This may take more than half an hour depending on the readings
of the data received.
Temperature History Page – Click this icon to display a summary of the list of
temperature in about 15-minute interval.