User's Manual

CONFIDENTIAL
CADI SmartSense – SmartNode SMN-822W User Manual
T-SMN-822-I02-A01
10
Check the response of device
by pressing the strain gauge.
Make sure green LED is
blinking on the press on strain
gauge.
Close and tighten the battery
compartment.
Make sure O-ring is always
intact in the grove.
Tighthen the battery
compartment with torque
3.0kgf.cm
Press the strain gauge sensing point.
Press the weighing plate, if there is.
Make sure there is
blinking LED
Tightening with torque
3.0kgf.cm