User's Manual

5
Warning: Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment and the other
equipment should be observed to verify that they are operating normally.
Warning: Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of the ME Equipment or
ME System, including cables specified by the manufacturer. Otherwise, degradation of the performance
of this equipment could result.
Manufacturer’s declaration-electromagnetic emissions
The SMN-823W is intended for use in the electromagnetic environment (for Professional healthcare environments)
specified below.
The customer or the user of the SMN-823W should assure that it is used in such an environment.
Emission test
Compliance
Electromagnetic environment-guidance
(for Professional healthcare environments)
RF emissions CISPR 11
Group 1
The SMN-823W uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emissions CISPR 11
Class B
The SMN-823W is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations
/flicker emissions IEC
61000-3-3
Not applicable