Owners Manual

To
Play
A
Cassette Tape
Turn the radio on.
Insert the cassette through the tape door. (The “TAPE” indicator in
If you hear nothing or hear just a garbled sound, the cassette may not be
in
squarely. Push the STOP- EJCT button
to
remove the tape and start
over. The tape equalization is automatically sensed and set. Insertin the
cassette also automatically disables DNR@* and activates DOLBY
8
noise reduction.
DNR‘ is the Dynamic Noise Reduction.
It
helps remove background hiss
noise from the radio.
the display
will
light.)
*DNR@
is
a registered trademark
of
National Semiconductor Corporation.
Once the tape is playing, use the upper and lower knobs to adjust the
volume and balance, just as you do for
the
radio. Push the upper knob
to change tape direction. The arrow in the display shows which
direction the tape is being played.
Forward
and Reverse
4
To
rapidly advance the tape. press and the tape
will
rapidly go forward
until you press the STOP-EJCT button.
To
rapidly reverse the tape. press
4
and the tape
will
rapidly reverse
until you press the STOP-EJCT button.
SEARCH
When
you
are playing a tape, the search feature lets you advance ahead
to the start
of
the next selection
or
rewind to the beginning of the
selection being played. Pressing the or
4
buttons
will
then advance or
rewind to the beginning or end
of
the selection being played.
NOTICE:
-
There must be at least a five second pause between selections
on
the tape for the
SEARCH
feature to operate properly.
-
162