Owners Manual

x---\
n
i‘
i
f
i
f
!
n
!
1
r
4. If the fluid.leve1 is in the acceptable range, push the dipstick back in
all the way.
How to Add Fluid
Refer to the Maintenance Schedule to determine what kind of transaxle
fluid to use. See “Recommended Fluids and Lubricants” in the Index.
If the fluid level is low, add only enough of the proper fluid to bring the
level into the cross-hatched area on the dipstick.
1. Pull out the dipstick. ..
2. Using a long-neck funnel, add enough fluid at the dipstick hole to
bring it to the-proper 1evel.It doesn’t take
much fluid, generally less
than a pint
(0.5L). Don’t overfin. Wenxommend you use only fluid
labeled DEXRON@-111 or DEXRON@-IIE, because fluids with that
label are made especially for your automatic transaxle. Damage
caused
by fluid other than DEXRON@-111 or DEXRON@-IIE is not
covered by your new vehicle warranty.
Check.”
After adding fluid, recheck the fluid level as described under “How to
269