Owners Manual

The rear TILT control makes the rear portion of the
1 seat cushion move up or down.
Moving the center control to the right or left makes
the whole
seat cushion move up or down.
Moving the center control backward or forward
makes the whole seat move rearward or forward.
Memory Seat (Fleetwood Brougham)
p
To program the memory seat:
I. Make sure the vehicle is in PARK (P).
2. Adjust the drrver’s seat the way you want it.
3. Press the SET button.
4. Move the memory switch to 1.
When your Fleetwood is in PARK (P) move the memory
switch
to 1 to recall the seat setting. Program the
memory seat for an additional driver following the
preceding steps, but move the memory switch to
2.
The EXIT button allows you to get out of your vehicle
more easily. The EXIT button
is programmed the same
as the memory selections. Position the seat fully back
and fully down.
If you select the wrong memory switch or EXIT button,
you can cancel
it by pressing any of the SEAT
ADJUSTER controls.