Owner's Manual

Fuel Data Panel
Digital Cluster
For vehicles equipped with an analog cluster (not
shown), fuel data can be obtained by pressing the
INFO button. See “Analog Control Buttons” later in
this section.
The fuel data panel tells you all
you need to know about
the fuel economy and how far you can travel with the
fuel remaining.
Press the
AVG button to display the average
mile-per-gallon (AVG MPG). You can also display it in
metric units by pressing the ENG MET button.
When AVG MPG is selected, the total distance is
divided by the total
fuel used.
When the INST button (Instantaneous Fuel Economy) is
selected,
you will see what the fuel economy is at that
instant. The computer takes a new reading twice every
second. It will show economy up to
70 miles-per-gallon
(or
2 L per 100 km).
To reset the average fuel economy, press the
INFORMATION button until the AVG
MPG is
displayed on the DIC. Press and hold the RESET button
until both the fuel data center and
DIC display reads 0.0.
The RANGE display shows how far the computer thinks
you can travel with the fuel that is in the tank. The
computer does
not know what driving conditions will be
like for the rest of your trip,
so the range is estimated
based
on the recent fuel economy. Therefore, the range
reading may change as your driving habits change.
Going from city to highway driving may increase the
range reading.
If the range display shows LO, you should stop for fuel
as soon as possible. Your computer needs enough data
for the RANGE reading to work.