Owners Manual

Table Of Contents
2-17
Drivers Door Alarm Delay
The alarm will sound eight seconds after the drivers
door is opened with your key.
Feature Customization
Your vehicle’s locks and lighting systems can be
programmed with several different features. The following
list tells you the features that can be programmed.
Lockout Prevention
Keyless Entry Verification
Theft
-Deterrent Arming Method
Theft
-Deterrent Arming Verification
To program features, your vehicle must be in the
programming mode. Follow these steps:
1. Put your key in the ignition.
2. Turn the ignition to RUN to disarm the
theft
-deterrent system.
3. Turn the ignition to OFF.
4. Remove fuse 17. This fuse is in the main fuse block,
located on the left side of your instrument panel.
When the main fuse block is open, the RADIO fuse
(Fuse 17) is located in the lower right corner side of
the fuse panel. See “Fuses and Circuit Breakers” in
the Index.
5. Turn the ignition to ACCESSORY.
You can now program your choices. After programming a
feature, you can exit the programming mode at anytime.
You should hear two chimes to verify that the system is
in programming mode. You will also be able to set
Lockout Prevention, Keyless Entry Verification, Arming
Method and Arming Verification.