Owners Manual

3-6
Air Conditioning
On hot days, open the windows long enough to let hot
inside air escape. This reduces the time it takes for your
vehicle to cool down. Then keep your windows closed
for the air conditioner to work its best.
Press the driver’s temperature knob to turn the system
on manually. You may also need to adjust the
temperature and fan speed. The system will cool and
dehumidify the air inside the vehicle.
When the system is in AUTO, it will use recirculation as
necessary to cool the air.
Heating
Press MODE to select floor. Adjust the interior
temperature manually to a comfortable level. If the fan
speed needs adjustment, press the up or down arrow.
Outside air will be brought in, warmed and sent through
the floor, instrument panel outlets. The heater works
best if you keep your windows closed while using it.
In AUTO, the fan will not run at high speed to minimize
warm-up time.
Defogging and Defrosting
Use FRONT on cool and humid days to keep the
windshield and side windows clear. This setting will
remove fog or ice from the windshield quickly in
extremely humid or cold conditions. If you desire to
have more air on your feet, turn the control to the
floor/defrost mode.
Press FRONT to activate the defrost mode. Adjust the
fan speed by pressing the up or down arrow on the fan
button. You may also adjust the temperature by turning
the driver’s temperature knob. If you select floor/defrost
from AUTO, the system will control the fan speed and
temperature for you.
Recirculation is not available in the defrost mode, and
the A/C system cannot be turned off in this mode.