< U m
... . .. .. . . : : : : : . .. .... : : : : : . . .. .. . . .. . :a, :.-o :I: :a, :> . . $ *.: :.. ;: > .. .. :-O .: :. : c 0 2a . .. .. ... .. .. .. .. ... _. .. .. ... . ... ... . . . a I . ... . .. .. .. .. ... ... .. .. ; . . ... . .. .. ... . .., .. ... .. $ 0 : a .: 0 E : 2 : . : Q : Q : Q 0 .. .. ... . ... ... 7 a : .. .. ... . ... ... .. .. .. . ... 7 .. .* .-. 7 . . :_ a ... .:.. :-: a : .. .. : v) E Q c, v) r m I . . . . . ... ... ... . : o 0 3 .
Canadian Owners You can obtain a French copy of this manual from your dealer or from: GENERAL MOTORS, GM,the GM Emblem, CADILLAC, the CADILLAC Crest &Wreath and the name DEVILLE are registered trademarks of General Motors Corporation. Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 How to Use This Manual This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
ngs ai IU You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning. Y o ~will l also find a circle with a slash through it in this book. This safety symbol means “Don’t,’’ “Don’t do this’’ or “Don’t let this happen.” These mean there is something that could hurt you or other people. In the caution area, we tell you what the hazard is.
Vehicle Damage Warnings Vehicle Symbols Also, in this book you will find these notices: Your vehicle may be equipped with components and labels that use symbols instead of text. Symbols, used on your vehicle, are shown along with the text describing the operation or information relating to a specific component, control, message, gage or indicator. Notice: These mean there is something that could damage your vehicle. A notice will tell you about something that can damage your vehicle.
CAUTION POSSIBLE INJURY A LATCH BOTH LAP AND SHOULDER BELTS TO PROTECTOCCUPANT DO NOT TWIST SAFETY BELT WHEN ATTACHING a- - , JGHTING MASTER / TURN SIGNALS PROTECT EYES BY SHIELDING CAUSTIC BATERY ACID COULD CAUSE BURNS MOVE SEAT FULLY REARWARD* SECURE CHILD SEAT \!$> / z DO NOT INSTALL A REAR-FACING CHILD RESTRAINT IN THIS SEATING POSITION ENGINE COOLANT SWITCH \ TEMP BAlTERY CHARGING SYSTEM PARKING LAMPS BRAKE COOLANT PULL BELT AVO ID SPARKS OR FLAMES , SPARK OR FLAME COULD EXPLODE BAlTE
NOTES vi
at Section 1 Seats and Restraint Systems Seats Front ......... ..................... .l -2 Power Seats ............. ...................... 1.2 Power Lumbar ............................................... 1-2 Massaging Lumbar ......................................... 1-3 Adaptive Seat Control ..................................... 1-3 Heated Seats ................................................ .l -4 Reclining Seatbacks ........................................ 1-5 Head Restraints ........................
Front Seats Power Lumbar Power Seats The power seat controls are located on the outboard sides of the front seat cushions. If your vehicle has this feature, the control is located on the outboard sides of the front seats. Use the power seat controls first to get the proper position, then continue with the lumbar adjustment. Move the front of the seat control up or down to adjust the front portion of the cushion. Move the rear of the seat control up or down to adjust the rear portion of the cushion.
If your vehicle has this feature, the control is located on the outboard sides of the front seats. With the ignition on, briefly press the top of the control where it is marked AUTO to activate the massaging lumbar feature. If your vehicle has this feature, the control is located on the outboard side of each front seat. It is marked AUTO. The massage cycle will run continuously for up to 10 minutes and can be interrupted by briefly pressing the bottom of the control.
You may still wish to further adjust the overall firmness or softness of the seat cushion. To get to your desired level of comfort, hold the control up to increase the firmness, or down for less firmness. When you let go of the control, the seat will automatically readjust to your desired level of comfort. Heated Seats Your vehicle may have heated front and rear seats. To reshape the lower seatback, press the lumbar control forward to increase support and rearward to decrease support.
s- c
Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t doits job. In a crash, you could go intoit, receiving neck or other injuries. The lap belt can’t do its job either. In a crash the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries.
?he frmt head restraiats are adjustable. Lift up or push down on the head restraint to raise or lower it. Pull forward or push rearward on the head restraint to tilt it forward or rearward. The rear head restraints work the same way as the front head restraints, except that they do not tilt forward or rearward. Adjust your head restraint so that the top of the restraint is ciusesi iu iilt: iup UrI yuul I I -G-~ U . I I 113p---:a:-ua111uI I reduces the chance of a neck injury in a crash. ~ ..
Rear Seats To activate the rear lumbar support feature, push forward on the control to increase support or rearward to decrease support. The lumbar control can also be moved up and down to adjust the location of the support. Power Lumbar Your vehicle may be equipped with four-way lumbar support, without the massage feature, for the outboard rear seating positions. The rear lumbar support controls are located on the rear door trim panels.
Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. Don’t let ,.lyone ride where he or she can’t wear a safety belt properly. If you are in a crash and you’re not wearing a safety belt, your injuries can be much worse. You can hit it. things inside the vehicle or be ejected from You can be seriously injured or killed.In the same crash, you might not be, if you are buckled up.
Your vehicle has a light that comes on as a reminder to buckle up. See Safety Belt Reminder Light on page 3-45. Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. In most states and in all Canadian provinces, the law says to wear safety belts. Here’s why: They work. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person wouldn’t survive.
c c-c uo au0aLUos lnd
The person keeps going until stopped by something. In a real vehicle, it could be the windshield... 1-12 or the instrument panel...
S m 3 0 CI I! v) 0 J c1' 1 r Q 9 1 'c Y
0:If I’m a good driver, and I never drive far from home, why should I wear safety belts? A: You may be an excellent driver, but if you’re in an accident - even one that isn’t your fault - you and your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone.
3. pi& up the !atcig piao,e aRr: p ! ! ‘Ihe bejf 2crC)ss yoi. Don’t let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. 4. Push the latch plate into the buckle until it clicks. Be sure to use the correct buckle when buckling your lap-shoulder belt.
Q: What’s wrong with this? oucan be seriol turl yourshoulderb is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. - A: The shoulder belt is too loose. It won’t give nearly as much protection this way.
You can be serious119 injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you. A: The belt is buckled in the wrong place.
Q: What's wrong with this? You can be seriously injuredif you wear the shoulder belt under your arm. In a crash, your body would move toofar forward, which would increase the chanceof head and neck injury. Also, the belt would applytoo much force to the ribs, which aren't as strong as shoulder bones. You could also severely injure internal organs like your liver orspleen. A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times.
Q: What’s wrong with this? You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it. L A! The belt is twisted across the body.
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
-!-he best y / z y to p&ct the .fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly. If your vehicle has a front bench seat, someone can sit in the center position. To learn how to wear the right front passenger’s safety belt properly, see Driver Position on page 1-14.
Rear Seat Passengers It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. Rear Seat Passenger Positions To make the belt shorter, pull its free end as shown until the belt is snug.
Lap=Shcu!de: All rear seating positions have lap-shoulder belts. Here’s how to wear one properly. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. 2. Push the latch plate into the buckle until it clicks. The latch plates for the safety belts in each rear seating position vary in size.
If the belt stopsbefore it reaches the buckle, tilt the latch plate and keep pulling until you can buckle it. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 1-28. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 1-24 3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part.
You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. L The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the pelvic bones. And you’d be less iikeiy io siicie urlder ii~eiap beii. it yuu siid urlder ii, iile belt would apply force at your abdomen. This could cause serious or even fatal injuries.
Rear Safety Belt Comfort Guides for Children and Small Adults Your vehicle may have this feature already. If it doesn’t, you can get it from any GM dealer. Rear shoulder belt comfort guides will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head. There is one guide available for each outside passenger position in the rear seat.
2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the beii inio the siuis ui ihe yuide. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top.
Safety Belt Pretensioners Your vehicle has safety belt pretensioners. You’ll find them on the buckle end of the safety belts for the driver and right front passenger. They help the safety belts reduce a person’s forward movement in a moderate to severe crash in which the front of the vehicle hits something. Pretensioners work only once. If they activate in a crash, you’ll need to get new ones, and probably other new parts for your safety belt system.
f i e V O A: Older Children PRSL-+ :c. ..,c..,+A 9L.m n w n n n w Y V I l a L 1 3 L I I G plUpGl U V a y .m,nav L U WWGLII a/m+\, hal+e? SU’bbJ U k U b e if possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs.
Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured.A belt must be used by only one person at a time. 1-30 1 Q: What if a child is wearing a lap-shoulder belt, but the child isso small that the shoulder belt is very closeto the child’s face or neck? A: If the child is sitting in a seat next to a window, move the child toward the center of the vehicle.
Never do this. Here a child is siitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt inthis way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’sabdomen. That could cause serious or fatal injuries. The lap portion of the belt should be worn low and snug on the hips, just touching the child’s thighs. This applies belt force to the child’s pelvic bones in a crash.
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
it. For example, in a crash at only 25 mph (40 km/h), a 12-lb. (5.5 kg) baby will suddenly become a 240-lb. (1 10 kg) force on a person’s arms. A baby should be securedin an appropriate restraint. ChllJren who are up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants.
Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available.
The bod) ,trub..Jre of a yo^.., -,lild is quite unlike that of an adult or older child, for whom the safety belts are designed.A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a bodyarea that’s unprotected by any bony structure. This alone could cause serious or fatal injuries.
A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. 1-36 A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.
I Q: Hoy: &! chiid restr;aifits yimk? A: A child restraint: system is any device designed for I A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some nign-Dack booster seats nave a iive-poini harness. A booster seat can also help a child to see out the window. use in a motor vehicle to restrain, seat, or position children.
When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both. These restraints use the belt system in your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury.
A child in a child restrair.. .n the center front seat can be badly injured or killed by the right front passenger's air bag if it inflates. Never secure a child restraintin the center frontseat. It's always better to secure a child restraintin the rear seat. You may secure a forward-facing child restraint in the right front passengerseat, but before youdo, always move the front passenger seat as far back asit will go. It's better to secure the child restraint in a rear seat.
Anchor the top strap to one of the following anchor points. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed. If you have an adjustable head restraint, route the top strap under it. Once you have the top strap anchored, you’ll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer’s instructions say.
cv- c
In order to use the system, you need either a forward-facing child restraint that has attaching points (B) at its base and a top tether anchor (C), or a rear-facing child restraint that has attaching points (B), as shown here. A. Vehicleanchor B. LATCH system attachment points Use the LATCH system instead of the vehicle’s safety belts to secure a child restraint. A. Vehicle anchor B. LATCH system attachment points C.
Securinn a a Child Restraint Designed for the LATCH System If a LATCH-type c...., restraint isn’t attacheL -0 its anchorage points, the restraint won’t be able to protect a child sitting there. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint.
Securing a Child Restraint in a Rear Seat Position If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-41. A child in a child restraintin the center front seat can be badly injured or killed by the right front passenger’s air bag ifit inflates. Never secure a child restraint in the center frontseat. It’s always better to secure a child restraint in the rearseat.
I Tilt the latch plate to adjust the belt if needed. 3. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Securing a Child Restraint in the Right Front Seat Position If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-41. 4. To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 5.
_3 _ Pi_!! the !-estra.int 0r-i the seat. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. A ,hild in a rear-facing ,hild restrair,. car. ,e seriously injured or killed if the right front passenger’s air bag inflates. This is becausethe back of the rear-facing child restraint would be very close to the inflating air bag.
5. Pull the rest of the lap belt all the way out of the retractor to set the lock. 1-48 6. To tighten the belt, feed the lap belt back into the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 7. Push and pull the child restraint in different directions to be sure it is secure. To remove the child restraint, just unbuckle the vehicle's safety belt and let it go back all the way.
A:, H l r DdY D Y S L ~ I I I S Dn- c I m m - & - . y n This part explains the frontal and side impact air bag systems. Your vehicle has air bags - a frontal air bag for the driver and anotherfrontal air bag for the right front passenger. Your vehicle also has a side impact air bag for the driver and another side impact air bag for the right front passenger. Your vehicle may also have a side impact air bag for each of the two rear seat outboard passenger positions.
Frontal air bags are designed to help reduce the risk of injury from the force of an inflating frontal air bag. But these air bags must inflate very quickly to do their job and comply with federal regulations. You can be severely injure-. killed in a crash if you aren’t wearing your safety belt, even if you have air bags. Wearing your safety belt during a crash helps reduce your chance of hitting things inside the vehicle or being ejected from it.
e,,,, .:ental and side impact air bags inflate with great force, faster than the blink of an eye. If you’re too closeto an inflating air bag, as you would be if youwere leaning forward, it could seriously injure you. Safety belts help keep you in position for air bag inflation before and during a crash. Alwayswear your safety belt even with frontal air bags.The driver should sit as far back as possible whilestill maintaining control of the vehicle. Occupants should not lean on or sleep against the door.
Where Are the Air Bags? AIR BAG United States 1 Canada There is an air bag readiness light on the instrument panel, which shows the words AIR BAG or an air bag symbol. The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See Air Bag Readiness Light on page 3-45 for more information. The driver’s frontal air bag is in the middle of the steering wheel.
The right front passenger’s frontal air bag is in the instrument panel on the passenger’s side. The driver’s side impact air bag is in the side of the driver’s seatback closest to the door.
The right front passenger’s side impact air bag is in the side of the passenger’s seatback closest to the door. 1-54 The side impact air bags for the rear seat outboard passenger positions are in the sides of the rear seatback closest to the doors.
If someth...d is between an occul;,.rt and an air bag, the bag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air bag covering. Don’t let seat covers block the inflation path of a side impact air bag.
What Makes an Air Bag Inflate? How Does an Air Bag Restrain? In an impact of sufficient severity, the air bag sensing system detects that the vehicle is ina crash. For both the frontal and side impact air bags, the sensing system triggers a release of gas from the inflator, which inflates the air bag. Theinflator, air bag and related hardware are all part of the air bag modulesinside the steering wheel, instrument panel and the side of the front seatbacks and behind the rear seatbacks closest to the door.
After the air bag inflates, it quickly deflates, so quickly that some people may not even realize the air bag inflated. Some components of the air bag module - the steering wheel hub for the driver’s air bag, the instrument panel for the right front passenger’s bag, the side of the seatback closest to the door for the side impact air bags - will be hot for a short time. The parts of the bag that come into contact with you may be warm, but not too hot to touch.
Your vehicle has a feature that will automatically unlock the doors and turn the interior lamps on when the air bags inflate (if battery power is available). You can lock the doors again and turn the interior lamps off by using the door lock and interior lamp controls. In many crashes severe enough to inflate an air bag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger air bag. Air bags are designed to inflate only once.
Servicing Your A & Baa-Eauiaoed - - - a -- -Vehicle I ---I-I- Air bags affect how your vehicle should be serviced. There are parts of the air bag systems in several places around your vehicle. Your dealer and the service manual have information about servicing your vehicle and the air bag systems. To purchase a service manual, see Service Publications Ordering information on page 7-10.
Restraint System Check Replacing Restraint System Parts AfT-r a Crash Checking Your Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces.
If the LATCH system was behg used during a rncxe severe crash, you may need new LATCH system parts. If an air bag inflates, you’ll need to replace air bag system parts. See the part on the air bag system earlier in this section. If belts are cut or damaged, replace them. Collision damagealsomaymeanyou will needtohaveLATCH If the frontal air bags inflate, you’ll also need to replace system,safetybeltorseat parts repaired or replaced.
Section 2 Features and Controls Keys ............................................................... 2.3 Remote Keyless Entry System ......................... 2.4 Remote Keyless Entry System Operation ...........2.5 Doors and Locks ............................................. 2.8 Door Locks .................................................... 2.8 Central Door Unlocking System ........................ 2.9 Power Door Locks .......................................... 2.9 Programmable Automatic Door Locks ...
Section 2 FeaturesandControls Center Flex Storage Unit ........................... 2-52 Map Pocket ................................................. 2-52 Assist Handles ............................................. 2-53 Garment Hooks ........................................... -2-53 Umbrella Holder ........................................... 2-53 Floor Mats ................................................... 2-53 2-2 2.53 Rear Storage Area ........................................
'J Leaving children in a vehicle with the ignition key is dangerous for many reasons.A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehiclemove. If they turned the ignition to ACCESSORY or ON and moved the shift lever out ofPARK (P), that would release the parkingbrake. Don't leave the keys in a vehicle with children.
Any new PASS-Key@I l l key must be programmed before it will start your vehicle. See PASS-Kef)111 on page 2-20 for more information on programming your new key. i Master Key Notice: Your vehicle has a number of features that can help prevent theft. You can have a lot of trouble getting into your vehicle if you everlock your keys inside. Youmay even have to damage your vehicle to get in. So be sure you have spare keys. In an emergency, contact Cadillac Roadside Assistance.
&/ice csmp!ies !#If.h SSS-2!() of !n&sfry~-2i-i~d~. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference received, including interference that may cause undesired operation of the device. Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment. At times you may notice a decrease in range. This is normal for any remote keyless entry system.
& (Unlock): When you @ Press this button again within one to five seconds to unlock the other doors. It will also disarm the theft-deterrent system and turn on the interior lamps at night. The remote keyless entry transmitter can be used to recall the memory settings for up to two drivers. For more information, see DlC Vehicle Personalization on page 3-59 and Memoly Seat, Mirrors and Steering Wheel on page 2-55. You can program your vehicle so the parking lamps will not flash.
2. Once the transmitter is separated, use an object Under normal use, the battery in your remote keyiess entry transmitter should last about four years. like a pencil to remove the old battery. Do not use a metal object. You can tell the battery is weak if the transmitter won't work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it's probably time to change the battery.
Doors and Locks Door Locks There are several ways to lock and unlock your vehicle. Because your vehicle has the theft-deterrent system, you must unlock the doors with the key or remote keyless entry transmitter to avoid setting off the alarm. From the outside, use either the key or the remote keyless entry transmitter. :ked doc:. - ca.. -Be dangers--. Passengers - especially children - can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle won’t open it.
PhwB+Yel n - a w VGIILICII UVVI I IY.!AALiWBPa Cmre+aBW U I I I V ~ ~ ‘I ( JIYI~ L ~ GIII Your vehicle has a central door unlocking mode and a theft-deterrent system. When unlocking the driver’s door, youcanunlocktheother doors by holding the key in the turned position for a few seconds or by quickly turning the door key twice in the lock cylinder. Power Door Locks The power door lock switches are located on the door panels near the windows.
Rear Door Security Locks Your vehicle is equipped with rear door security locks that prevent passengers from opening the rear doors on your vehicle from the inside. The rear door security locks are located on the edge of each rear door. You must open the doors to access them. When you want to open a rear door while the security lock is on, do the following: 1. Unlock the door using the remote keyless entry transmitter, the front door power lock switch or by lifting the rear door manual lock. 2.
I alrln;mm V A r m r L G a v I I IY I VUI \/ahinla v GIIIWIG If you are leaving your vehicle, open the door, set the locks from the inside, get out and close the door. It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can come into your vehicle.You can’t see or smell CO. It can cause unconsciousness and even death.
Trunk Lid Tie Down I I I Driving with thetrbIId lid open can allow dangerous CO (carbon monoxide) gas to come into your vehicle. You can’t see or smell CO. It can cause unconsciousness and evendeath. If you ever need to drive with your trunk lid open, then: Make sure all windows, the rear seat pass-through and sunroof are closed. Turn the fan on your heating and cooling system to its highest speed, with the setting on AUTO and temperature between 65°F (18°C) and 85°F (29°C).
E 1-z I
Windows m Leaving children in a vehicle with the windows closed is dangerous. A child can be overcome by the extreme heat and can suffer permanent injuries or even death from heat stroke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather.
Your vehicle has Retained Accessory Power (RAP) that allows you to use the power windows once the ignition has been turned off. For more information, see “Retained Accessory Power” under lgnition Positions on page 2-23. E X ~ W S S - D OWindow W~ This feature is on all power windows. Press the down arrow on the switch to the second position to activate the express-down feature. If you want to stop the window as it is lowering, press the down arrow on the switch again.
Anti-Pinch Feature If a hand, an arm or another object is above the middle of the window and is in the path of the window when the express-up feature is active, the window will stop at the obstruction and express-open to a preset factory position. ~ Pressing and holding the powerwindow control will turn off the anti-pinch feature. If this happens, a power window won’t stop if something gets in the way. You or others could be injured, and your window could be damaged.
Swing down the primary visor to block out glare. It can alsobedetachedfromthe center mount and moved to the side while the auxiliary sunshade remains to block the glare from the front. The visors also have side-to-side slide capability. The driver's sunshade is also equipped with a storage flap. if your vehicle is equipped with the rear power sunshade, it helps to reduce the amount of heat and light entering the rear window.
To raise the power sunshade, press and release the REAR SHADE switch located on the front overhead console. To close the power sunshade, press and release the REAR SHADE switch again. Never store objects on the rear shelf because they may get caught in the sunshade or be tossed about in your vehicle. 2-18 Manual Rear Side Door Sunshade Your vehicle may have manual rear side door sunshades.
!iG door or the trunk is opened :":ith~ut a key or a remote keyless entry transmitter, the horn will sound and the lamps will flash for about 30 seconds. Vehicle theft is big business, especially in some cities. Although your vehicle has a numberof theft-deterrent features, we know that nothing we put on it can make it impossible to steal. Remember, the theft-deterrent system won't arm if you lock the doors with a key or use the manual door lock.
Testing the Alarm 1. From inside the vehicle, roll down the window, then get out of the vehicle, keeping the door open. 2. From outside of the vehicle, with the door open, lock the vehicle using the power door lock or the remote keyless entry system and close the door. Wait 30 seconds until the SECURITY lamp goes off. Valet Lockout Switch The valet lockout switch is located inside the glove box. 3. Reach in and unlock the door using the manual lock and open the door.
PASS-Ke\P J !!! Your PASS-Key@ Ill system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with RSS-210 of Industry Canada.
If the engine does not start, and the key appears to be undamaged, try another ignition key. At this time, you may also want to check the fuse. See Fuses and Circuit Breakers on page 5-94. If the engine still does not start with the other key, your vehicle needs service. If your vehicle does start, the first key may be faulty. See your dealer who can service the PASS-Key@lIIto have a new key made. It is possible for the PASS-Key@lll decoderto learn the transponder value of a new orreplacement key.
With the key in the ignition switch, you can turn the key to four different positions. New Vehicle Break-In Notice: Ysua vehicle doesn’t need an elaborate “break-in.” But it will perform better in the long run if you follow these guidelines: e Don’t drive at any one speed - fast or slow - for the first500 miles (805 km). Don’t make full-throttle starts. e Avoid making hard stops for the first 200 miles (322 km) or so. During this time your new brake linings aren’t yet brokenin.
Notice: If your key seems stuck in OFF and you can’t turn it, be sure you are using the correct key; if so, is it all the way in? If it is, then turn the steering wheel left and right while you turn the key hard. Turn the key only with your hand. Using a tool to force it could break the key or the ignition switch. If none of these works, then your vehicle needs service. A (OFF): This is the only position in which you can insert or remove the key.
Move your shift lever to PARK (P) or NEUTRAL (N). Your engine won’t start in any other position - that’s a safety feature. To restart when you’re already moving. use NEUTRAL (N) only. Notice: Don’t try to shift to PARK (P) id your vehicle is moving. If you do, you could damage the transaxle. Shift to PARK (P) only when your vehicle is stopped. 1. With your foot off the accelerator pedal, turn your ignition key to START. When the engine starts, let go of the key.
Engine Coolant Heater In very cold weather, 0°F (-18°C) or colder, the engine coolant heater can help. You’ll get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle. At temperatures above 32°F (OOC), use of the coolant heater is not required. To Use the Engine Coolant Heater 1. Turn off the engine. 2. Open the hood and unwrap the electrical cord.
-A1ltnmatic Tra,nsaxle Operation - - - - 1 . 1 - - . - P.-.Jging thecc- ...to ounded - ____ L could cause an electrical shock.Also, the wrong kind of extension cord could overheat and cause a fire. You could be seriously injured. Plug the cord into a properly grounded three-prong 110-volt AC outlet. If the cord won't reach, use a heavy-duty three-prong extension cord rated forat least 45 amps. I 4.
. .... . .:.. . .:-.::... . . . .: .:-.:L . . . . . . ........... .......................................... ......... . .. ....”. .”..... ..... ........... . . . . . . . . . . . . . . . . . . ...................... .”... ... .”....................... Column Shifter (Digital and Analog Cluster similar) PARK (P): This position locks the front wheels. It’s the best position to use when you start the engine because your vehicle can’t move easily.
REVERSE (R): Use this gear to back up. Notice: Shifting to REVERSE (R) while your vehicle is moving forward could damage your transaxle. Shift to REVERSE (R) only after your vehicle is stopped. Also use this gear to rock your vehicle back and forth to get out of snow, ice or sand without damaging your transaxle. See If You Are Stuck: In Sand, Mud, Ice or Snow on page 4-30 for additional information. NEUTRAL (N): In this position, the engine doesn’t connect with the wheels.
Here are examples for using THIRD (3) instead of AUTOMATIC OVERDRIVE (@). When driving on hilly, winding roads. When towing a trailer, so there is less shifting between gears. When going down a steep hill. SECOND (2): This position gives you more power. You can use SECOND (2) on hills. It can help control your speed as you go downsteep mountain roads, but then you would also wantto use your brakes off and on.
The following procedure allows the ignition to be turned to OFF and for ignition key removal in case of a dead battery or low voltagebattery for vehicies equipped with a column shift lever. 1. Verify that the shift lever is in PARK (P). 2. Locate the override access slot underneath the steering column below the lock cylinder. 3. Remove the override access slot cap.
4. Press the shift lock release toward the front of the vehicle and hold it there. Parking Brake The parking brake pedal is located to the left of the regular brake pedal, near the driver’s door. 5. While applying the brakes, shift the transaxle from PARK (P) as needed. 6. Reinstall the shift lock release hole cover and the rubber mat. 2-32 To set the parking brake, hold the regular brake pedal down with your right foot and push the parking brake pedal down with your left foot.
If the ignition is on: the brake system warning and parking brake indicator light on the instrument panel cluster should come on. If it doesn’t, you need to have your vehicle serviced. When you move out of PARK (P) or NEUTRAL (N) and the engine is running, the parking brake should release. If the parking brake has not been fully released and you try to drive off with the parking brake on, the brake system warning and parking brake indicator light will come on and stay on and a multiple chime will sound.
Before releasing the manual parking brake, be sure to put the vehicle in PARK (P) and turn the ignition to OFF. Notice: Driving with the parking brake on can cause your rear brakesto overheat. You may have to replace them, and you could alsodamage other parts of your vehicle. If you are towing a trailer and are parking on a hill, see Towing a Trailer on page 4-34.
Steering Column Shift Lever If your vehicle is equipped with a steering column shift lever, use the following procedure to shift the vehicle into PARK (P): 1. Hold the brake pedal down with your right foot. 2. Move the shift lever into PARK (P) like this: Move the lever up as far as it will go. 3. With your right foot still holding the brake pedal down, set the parking brake. 4. Turn the ignition key to OFF. 5. Remove the kyey and take it with you. If you can ... - :--:i:-I_-. . .,-. .
Console Shift Lever If your vehicle is equipped with a console shift lever, use the following procedure to shift the vehicle into PARK (P): 1. Hold the brake pedal down with your right foot. 4. Turn the ignition key to OFF. 5. Remove the key and take it with you. If you can leave your vehicle with the ignition key in your hand, your vehicle is in PARK (P). Leaving Your Vehicle With the Engine Running It can be dangerous toleave your vehicle with the engine running.
Torque Lsck If you are parking on a hill ai-id you don’! shift yow transaxle into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transaxle. You may find it difficult to pull the shift lever out of PARK (PI. This is called “torque lock.” To prevent torque lock, set the parking brake and then shift into PARK (P) properly before you leave the driver’s seat. To find out how, see Shifting Into Park (P) on page 2-34.
Engine Exhaust Parking Over Things That Burn Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: Your exhaust system sounds strange or different. Your vehicle gets rusty underneath. Your vehicle was damaged in a collision. Your vehicle was damaged when driving over high points on the road orover road debris. Repairs weren’t done correctly.
Runnina Your Earaine While YOU Are Parked 3 J - - It’s better not to park with the engine running. But if you ever have to, here are some things to know. Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle. See the earlier Caution under “Engine Exhaust.” Also, idling in a closed-in place can let deadly carbon monoxide (CO) into your vehicle even if the fan is at the highest setting. One place this can happen is a garage.
Mirrors Cleaning the Mirror Automatic Dimming Rearview Mirror with Onstar@ When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing. Your vehicle may have an automatic dimming rearview mirror with Onstar@system controls. For more information about Onstar@,see OnStap System on page 2-45.
Mirror Operation fi (On/Off): The on/off button is located on the lower left side of the mirror face for the electrochromic and compass functions of the rearview mirror. To turn on the automaticdimming feature, press and hold the on/off button for about three seconds. To turn off automatic dimming, pressand hold the on/off button for about three seconds again.The indicator light will illuminate when this featureis active. The automatic dimming feature is active each time the vehicle is started.
Cleaning the Mirror When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing. Outside Power Mirrors 3. Once the zone number appears in the display, press the on/off button quickly until the correct zone number appears in the display. Stop pressing the button and the mirror will return to normal operation.
The mirrors can be manually folded inward to prevent damage when going through an automatic car wash. To fold, push the mirror toward the vehicle. To return the mirror to its original position, push outward. Be sure to return both mirrors to their original unfolded positions before driving. The mirrors also have an arrow on the mirror face that flashes in the direction of the turn when the turn signal is used. See Turn SignaVMultifunction Lever on page 3-8.
Outside Convex Mirror Outside Heated Mirrors Your passenger’s side mirror is convex. A convex mirror’s surface is curved so you can see more from the driver’s seat. This mirror does not have a dimming feature. When you operate the rear window defogger, it also warms both outside mirrors to help clear them of fog or ice. See Dual Climate Control System on page 3-29 for more information. A convex mirror can ma.,, things (like other vehicles) look farther away than they really are.
Onstar@provides a number of service plans. Some of the services currently provided by Onstar@are: Automatic Notification of Air Bag Deployment Emergency Services Roadside Assistance Stolen Vehicle Tracking AccidentAssist RemoteDoorUnlock Onstar@uses global positioning system (GPS) satellite technology, wireless communications,and call centers to provide you with a wide range of safety, security, information and convenienceservices. An Onstar@ subscription plan is included in the price of your vehicle.
Onstar@Virtual Advisor With Onstar@Virtual Advisor you can listen to the news, entertainment and informative topics, such as traffic and weather reports. You are able to listen and reply to your e-mail through your vehicle’s speakers. A completed Subscription Service Agreement is required prior to delivery of Onstar@services and prepaid calling minutes are also required for Onstar@ Personal Calling and Onstar@Virtual Advisor use.
If your vehicle is equipped with the HomeLinkO Transmitter, it complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Programming the HomeLink Transmitter Do not use the HomeLink@Transmitter with any garage door opener that does not have the “stop and reverse” feature. This includes any garage door opener model manufactured before April 1, 1982. Keep the original transmitter for use in other vehicles as well as for future HomeLink@ programming.It is also recommended that upon the sale of the vehicle, the programmed HomeLink@buttons should be erased for security purposes.
5. Press and hold the newly-trained Homelink@button and observe the indicator light. If the indicator light stays on constantly, programming is complete and your device should activate when the HomeLink@button is pressed and released. To program the remaining two HomeLink@buttons, begin with Step 2 under “Programming HomeLink@.” Do not repeat Step 1 as this will erase all of the programmed channels.
Using HomeLink@ Press and hold the appropriate HomeLink@button for at least half of a second. The indicator light will come on while the signal is being transmitted. Erasing HomeLink@Buttons To erase programming from the three buttons do the following: 1. Press and hold down the two outside buttons until the indicator light begins to flash, after 20 seconds. 2. Release both buttons. Do not hold for longer than 30 seconds.
Eucrm+ C + A W ~ . ~ A- A W I I UIIL Glove Box The glove box is located in front of the passenger's seat on the instrument panel. To lock the glove box door, insert the master key into the lock cylinder and turn it clockwise. Turn the key counterclockwise to unlock the door. Instrument Panel Storage Area This storage compartment is located in the center of the instrument panel below the radio. Pull the door out to reveal the accessory poweroutlet and storage compartment.
Center Flex Storage Unit When not being used, the center seat lap belt can be stored in the underseat storage compartment as shown. Your vehicle may be equipped with a center flex storage unit that includes a front center seat with a lap belt and an underseat storage compartment. The center seatback can also be used as a fold down armrest with extra space for CDs or tapes. An optional cellular telephone may be located in the underseat storage compartment.
Rear Storage Area A handle above each door can be used when getting out of your vehicle. Garment Hooks Your vehicle is equipped with flip-out garment hooks. They are located above the rear doors, behind the rear assist handles. Return to the stowed position when not in use. Umbrella Holder The driver’s and passenger’s front seat cushions are equipped with an umbrella holder. Gently slide the umbrella into the slot located under the front portion of the driver’s or passenger’s seat cushion.
Sunroof Press and release the ROOF switch rearward to the second position to express-open the glass panel to the comfort stop position, approximately half-way open. The comfort stop position is designed to help reduce noise and make the rear seat passengers more comfortable. The glass panel may then be fully opened by pressing the ROOF switch again.
seating and steering wheel position can be programmed by repeating the above steps and pressing button 2 (for driver 2). Each time a memory button is pressed, a single beep will sound. Each time button 1 or 2 is pressed and released while the vehicle is in PARK (P), the memory positions will be recalled after a brief delay. If the vehicle is not in PARK (P), the memory buttons must be pressed and held to recall the stored positions. .A secnnd - - - - . . _..mirror, . ... .
Two personalized exit positions can be set by first recalling the driving position (by pressing 1 or 2), then positioning the steering wheel and seat in the desired exit positions and then pressing and releasing the MEMORY SET button and, within five seconds, pressing the EXIT button. With the vehicle in PARK (P), the exit position for the previously set driver can be recalled by pressing the EXIT button. The mirrors, power lumbar and shoulder belt height positions will not be stored or recalled.
Section 3 Instrument Panel Instrument Panel Overview ............................ 3.4 Hazard Warning Flashers ........ .............3.6 Other Warning Devices ................................... 3-7 Horn ............................................................ -3-7 Tilt Wheel ..................................................... 3-7 Turn SignaVMultifunction Lever ......................... 3-8 Exterior Lamps ............................................. 3-15 Interior Lamps ..............................
Section 3 instrument Panel Audio System(s) ............................................. 3.80 Setting the Time for Radios without Radio Data Systems (RDS) .................................. 3.80 Setting the Time for Radios with Radio Data Systems (RDS) ......................................... 3-80 Radio with Cassette and CD (Base Level) ............................................ -3-81 Radio with Cassette and CD (Up Level) ............................................... -3-88 Navigation/Radio System ...
E-€
Instrument Panel Overview 3-4
The main components of the instrument panel are the following: A.Air Outlets B. TurnSignaVMultifunction Lever C. Climate Controls and Onstar@Steering Wheel Controls (or Cellular TelephoneControls) D. Instrument Panel Cluster E. Audio Steering Wheel Controls F. Driver Information Center (DIC) Buttons G. Climate Controls H. Exterior Lamp Controls I. Night Vision Controls J. HoodRelease K. Cruise Control L. Horn M. Cruise Control N.Radio 0. Ashtray P.
Hazard Warning Flashers The hazard warning button is located on the center of the instrument panel between the two air vents. Your hazard warning flashers work no matter what position the key is in, and even if the key isn't in. Press the button to make the front and rear turn signal lamps flash on and off. Press the button again to turn the flashers off. When the hazard warning flashers are on, the turn signals won't work. Your hazard warning flashers let you warn others.
If you carry reflective triangles, yoti can set one tip at the side of the road about 300 feet (100 m) behind Your vehicle. Horn The horn can be sounded by pressing on the center of the steering wheel pad. A iiii wheei aiiows you to adjust the steering wheel before you drive. You can raise the steering wheel to the highest level to give your legs more room when you enter and exit the vehicle. The lever that allows you to tilt the steering wheel is located on the left side of the steering column.
Power Tilt Wheel and Telescopic Steering Column If your vehicle has this feature, the power tilt wheel control is located on the outboard side of the steering column. To operate the power tilt feature, push the control up and the steering wheel will tilt up. Push the control down and the steering wheel will go down.
Turn and Lanechange Signals Headlamp HiahILow-Beam Changer To signal a turn, move the lever all the way up or down. The lever returns automatically when the turn is complete. Push forward to change the headlamps from low beam to high. Pull the lever back and then release it to change from high beam to low. II An arrow on the instrument panel cluster and in the outside rearview mirror will flash in the direction of the turn or lane change.
Windshield Wipers OFF: Turn the band to OFF to turn off the wipers. Be sure to clear ice and snow from the wiper blades before using them. If they’re frozen to the windshield, carefully loosen or thaw them. If the blades do become damaged, get new blades or blade inserts. Heavy snow or ice can overload the wiper motor. A circuit breaker will stop the motor until it cools. Clear away snow or ice to prevent an overload. Your vehicle is equipped with wiper-activated headlamps.
The RainsenseTM system can beactivated by turning the wiper band to one of the five sensitivity levels indicated on the wiper stalk. The position closest to OFF is the lowest sensitivity setting, level one. This allows more rain or snow to collect on the windshield between wipes. Turning the wiper band away from you to higher sensitivity levels increases the sensitivity of the system and frequency of wipes. The highest sensitivity setting, level five is closest to LO.
Cruise Control Cruise control can be dangerous where you can’t drive safely at a steady speed. So, don’t use your cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause needless wheel spinning, and you could lose control. Don’t use cruise control on slippery roads. The buttons to operate cruise control are located on the steering wheel.
E 1-E
Increasing Speed While Using Cruise Control Passing Another Vehicle While Using Cruise Control There are two ways to go to a higher speed: Use the accelerator pedal to increase your speed. When you take your foot off the pedal, your vehicle will slow down to the cruise control speed you set earlier. e e Use the accelerator pedal to get to the higher speed. Press the SET/CST button, then release the button and the accelerator pedal. You will now cruise at the higher speed. Press the RES/ACC button.
= license Mate la.mps Instrument Panel Lights The exterior lamp control is located to the left of the steering wheel on the instrument panel. The parking brake indicator light will come on and stay on when the parking lamps are on with the engine off and the ignition in ACCESSORY or ON. $0 (Headlamps): Turning the control to this position turns on the headlamps, together with the previously listed lamps and lights.
Lamps on Reminder A warning chime will sound if the exterior lamp control is left on in either the headlamp or parking lamp position and the driver’s door is opened with the ignition off. Daytime Running Lamps Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, but they can be especially helpful in the short periods after dawn and before sunset.
Fsg Lamps If your vehicle has fog lamps, use them for better visio:: in foggy or misty conditions. The fog lamp button is located to the left of the steering wheel on the instrument panel. The cornering lamps come on when the headlamps or parking lamps are on and you signal a turn with the multifunction lever. They provide more light for cornering. Twilight Sentinel@ This lever is located next to the exterior lamp control. It automatically turns the lamps on and off by sensing how dark it is outside.
If you move the lever all the way to the right, the lamps will remain on for approximately three minutes after the ignition has been turned to OFF. If you move the lever so it is barely on, the lamps will go off quickly when you turn the ignition switch out of OFF. You can adjust the delay time from only a few seconds to about three minutes. If it’s dark enough outside and the Twilight Sentinel@’lever is off, a HEADLAMPS SUGGESTED message will display on the Driver Information Center (DIC).
6 1%
Courtesy Lamps Parade Dimming The courtesy lamps are located on the headliner above the rear seat. These lamps come on by turning the instrument panel brightness knob fully clockwise or when any door is opened and it is dark outside. Puddle lamps are located on the bottom of the front and rear door trim. This feature prohibits dimming of the digital displays and backlighting during daylight hours when the key is in the ignition and the headlamps are on.
The battery load management feature is designed to monitor the vehicle’s electrical load and determine when the battery is in a heavy discharge condition. During times of high electrical loading, the engine may idle at a higher revolutions per minute (rpm) setting than normal to make sure the battery charges.
Inadvertent Power Battery Saver This feature is designed to protect your vehicle’s battery against drainage from the interior lamps, trunk lamp, glove box lamp, cigarette lighters or the garage door opener. When the ignition is turned off, the power to these features will automatically turn off after 10 minutes (three minutes if a new car has 15 miles (24 km) or less). Power will be restored for an additional 10 minutes if any door is opened, the trunk is opened or the courtesy lamp switch is turned on.
If the Night Vision System image is too bright, or too high in your field of view, it may take you more time to see things you need to see when it’s dark outside. Be sure to keep the image dim and placed low in your field of view. Remember that the Night Vision System, can only help you see objects that are warmer or colder than the surroundings. It can’t sense things like brake lights, turn signals or emergency flashers, traffic lights or signs.
In dry, clear weather, the system can see pedestrians, animals and the direction of the road ahead. In light rain, light snow or light fog the image may not be as clear and you may not be able to see the direction of the road ahead. In more severe weather conditions, thc ;vage maybe uncler notusable. Don’t use the Night Vision Systemto replace your normal view of the road ahead. It can’t tell you how far away thingsare. It senses only warmer or colder objects, not all objects.
U!trasonic Rear Parking Assist (URPA) Your vehicle may be equipped with Ultrasonic Rear Parking Assist (URPA).This system can help you to determine how close an object is to your rear bumper within a given area, making parking easier. If children, bicycles, or pets are behind your vehicle, RPA won’t tell you they are there. You could strike them and they could be injured or killed. Whether or not you are using URPA, check carefully behind your vehicle and then watch closely whenever you back up.
How the System Works URPA comes on automatically when the shift lever is moved into REVERSE (R) and the vehicle speed is less than 3 mph (5 km/h). When the system comes on, the three lights on the display will illuminate to let you know that the system is working. URPA senses how close your vehicle is to an object. The distance is determined by the four ultrasonic sensors located on the rear bumper.
--*.--.W ...~.-.. PR ~vsirq --.. . an -. . aecesenry ------ -- power QU~!&, Ahtirw. m Your vehicle is equipped with accessory power outlets. The outlets can be usedto plug in electrical equipment such as a cellular telephone, CB radio, etc. maximum electrical load must not exceed amperage rating. Aiways turn off any electrical equipment when not in use. Leaving electrical equipment on for extended periods will drain your battery.
Ashtrays and Cigarette Lighter Cigarette Lighter Notice: Don’t hold a cigarette lighter in with your Notice: Don’t put papersor other flammable items hand while it is heating. If you do, it won’t be able to into your ashtrays. Hot cigarettes or other smoking materials could ignite them, causing a damaging fire. back away from the heating element whenit’s ready. That can make it overheat, damaging the lighter and the heatingelement.
Dual Climate Control System With this system you can control the heating, cooling and ventilation for your vehicle. Automatic Operation AUTO (Automatic): When this button is pressed and the temperature is set, the system will automatically control the inside temperature,the air delivery mode and .-.-iile iarl s p e d nu I u wiii appear ur1 ii~eciispiay. I I . Press the AUTO button. 2. Adjust the temperature to a comfortable setting between 70°F (21°C) and 80°F (27°C).
Manual Operation A MODE v : Pressing the MODE switch and changing the mode cancels automatic operation and places the system in manual mode. Press AUTO to return to automatic operation. To change the current mode, select one of the following: 2 (Vent): This mode directs air to the instrument panel outlets. l2 (Bi-Level): This mode directs approximately half of the air to the instrument panel outlets, and then directs most of the remaining air to the floor outlets.
PASS TEMP V ( ~ a s s e n g e r~’ ~ e m p ~ r a t ~ r press e): this switch to turn the passengers’ climate control systems on. Press this switch to manually increase or decrease the temperature for the front passenger. PASS OFF (Passenger’s Climate Control): Press this button to turn all passenger climate control systems off. If the passenger’stemperature switch is turned off, the driver’s temperature knobwill control the temperature for the entire vehicle.
Sensors There is also a sensor located behind the front grill. This sensor reads the outside air temperature and helps to maintain the temperature inside the vehicle. Any cover on the front of the vehicle could cause a false reading in the temperature. Defogging and Defrosting There are two modes to clear fog from your windshield. Use the floor/defog mode to clear the windows of fog or moisture and warm the passengers. Use the defrost mode (FRONT) to remove fog or frost from the windshield more quickly.
Rear Window Defoaaer V Y Outlet Adjustment The rear window defogger uses a warming grid to remove fog or frost from the rear window. The rear window defogger will only work when the ignition is in ON. REAR: Press this button to turn the rear window defogger on or off. Be sure to clear as much snow from the rear window as possible. The rear window defogger will turn off approximately 10 minutes after the button is pressed.
Operation Tips e e e e Rear Climate Control System Clear away any ice, snow or leaves from the air inlets at the base of the windshield that may block the flow of air into your vehicle. Use of non-GM approved hood deflectors may adversely affect the performance of the system. Keep the path under the front seats clear of objects to help circulate the air inside of your vehicle more effectively.
A PAS$ TEMP v : Press this switch located on the main climate control panelin the front of the vehicle on the instrument panel to turn on the system. OFF: Turn the mode knob located on the rear climate control panel to this position to turn off the airflow. if the PASS OFF button located on the main climate control panel is pressed, the rear climate control system will be turned off and the settings selected for the main climate control panel will also be selected for the rear seat passengers.
A @ V (Fan): Pressing this switch cancels automatic operation and places the system in manual mode. Press this switch to increase or decrease the fan speed. Press the MODE switch until AUTO is displayed to return to automatic operation. A TEMP v (Temperature): Press this switch to increase or decrease the temperature for the rear seat passengers. Passenger (hnpaflrnent Air Filter The Passenger compartment air filter traps most of the pollen from the air enteringyourvehicle.
To access the passenger compartment air filter, do the following: 1. Use a tool to gently prythe cover up. (If your vehicle has tabs that allow youto unlatch the cover with your fingers, you will not needtool a for this step.) 2. Then, insert a tool behind the push pin located on the inboard side of the air filter compartment to carefully pry the pin out.
Steering Wheel Climate Controls You can adjust the temperature using the steering wheel controls. The control for the temperature is located on the left side of the steering wheel. 3. To remove the air filter, insert a tool between the air filter and the compartment wall on the outboard side of the vehicle. Then, push in to flatten the pin holding the air filter in place. Gently remove the air filter and any loose debris that may be inside the air filter compartment. 4.
2. Locate memory buttons 1 and 2 on the driver’s door panel. if your vehicle is equipped with this feature, you can store and recall climate control settings for the temperature, the fan speed and the direction of the airflow. Memory buttons 1 and 2 are located on the driver’s door panel and correspond to the numbers 1 or 2 found on the back of each remote keyless entry transmitter.
Warning Lights, Gages and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to your warning lights and gages could also save you or others from injury. Warning lights come on when there may be or is a problem with one of your vehicle’s functions.
A Y v, 3 n 0
P w N \
The speedometer lets you see your speed in both miles per hour (mph) and kilometersper hour (km/h). The odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). You may wonder what happens if a vehicle has to have a new odometer installed. The new one may read the correct mileage. This is because your vehicle’s computer has stored the mileage in memory.
English/Metric Button By pressing this button located to the left of the steering wheel on the instrument panel, you can go back and forth from English (miles) to metric (kilometers). Tachometer (Analog Cluster Only) This gage indicates the engine speed in revolutions per minute (rpm). Other readings such as temperature, fuel and trip odometer also go back and forth between English and metric. Notice: Do not operate the engine with the tachometer in the shaded warning area, or engine damage may occur.
-Air --- Baa - --a Readiness - - -- - - - When the key is turned to ON or START, a chime will come on for several seconds to remind people to fasten their safety belts. The safety belt light will also come on and stay on for several seconds. If the driver’s belt is already buckled, the light will come on briefly, but the chime will not sound. Liaht e There is an air bag readiness light on the instrument panel, which shows AIR BAG or the air bag symbol.
If the air bag readiness light stays on after you start the vehicle or comes on when you are driving, your air bag system may not work properly. Have your vehicle serviced right away. Iftheair Dag readiness light :...y s on you start your vehicle, it means the air bag system may not be working properly.The air bags in your vehicle may not inflate in a crash, or they could even inflate without a crash.
Your vehicle’s hydraulic brake system is divided into two parts. If one part isn’t working, the other part can still work and stop you. For good braking, though, you need both parts working well. If the warning light comes on, there is a brake problem. Have your brake system inspected right away. 1 - BRAKE This light should comeon brieflywhen you turn the ignition key to ON. If it doesn’t come on then, have it fixed so it will be ready to warn you if there’s a problem. I .____ system may .
Anti-Lock Brake System Warning Light With the anti-lock brake system, the light(s) will come on when your engine is started and may stay on for several seconds. That’s normal. Traction Control System (TCS) Warning Light r I TRACTION CONTROL i United States If the light stays on, turn the ignition to OFF. Or, if the light comes on when you’re driving, stop as soon as possible and turn the ignition off. Then start the engine again to reset the system.
The traction control system warning light may come on for the following reasons: If there’s a brake system problem that is specifically related to traction control, the traction control system will turn off and the warning light will come on. If the traction control system is affected by an engine-related problem, the system will turn off and the warning light will come on.
Engine Coolant Temperature Gage That reading means the same thing as the warning light - the engine coolant has overheated. See Engine Overheating on page 5-27. Malfunction Indicator Lamp d Service Engine Soon Light in the United States or Check Engine Light in Canada H TEMP United States (Analog Only) 000000000 000000000 f i H TEMP C Digital Cluster 3-50 Canada (Analog Only) This gage shows the engine coolant temperature. If the gage pointer moves into the shaded area, the engine is too hot.
This system is called OBB II (On-Board Diagnostics Second Generation) andis intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment. The SERVICE ENGINE SOON or CHECK ENGINE light comes on to indicate that there is a problem and service is required. Malfunctions often will be indicated by the system before any problem is apparent. This may prevent more serious damage to your vehicle.
If the light continues to flash, when it is safe to do so, stop the vehicle. Find a safe place to park your vehicle. Turn the key off, wait at least 10 seconds and restart the engine. If the light remains on steady, see “If the Light Is On Steady” following. If the light is still flashing, follow the previous steps, and drive the vehicle to your dealer or qualified service center for service.
Programs Some state/provincial and local governments have or may begin programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. Here are some things you need to know to help your vehicle pass an inspection: Your vehicle will not pass this inspection if the SERVICE ENGINE SOON or CHECK ENGINE light is on or not working properly.
The light goes on when you turn your key to ON or START. It goes off once you start your engine. That’s a check to be sure the light works. If it doesn’t come on, be sure to have it fixed so it will be there to warn you if something goes wrong. When the light comes on and stays on, it means that oil isn’t flowing through your engine properly. You could be low on oil and you might have some other system problem. Security Light r-l 50 This light will comeon when the fog lampsare in use.
1 - CRUISE This light comes on whenever the cruise control system is in use. It will go out when the system is turned off. I B FUEL AVG nna r=! RANGE See “Cruise Control” under Turn Signa//Mu/tifunction Lever on page 3-8 for more information. E 1/100 r=!.UMPGIkm 1 ’% 8 Digital Cluster If the fuel supply gets down to approximately 3 gallons (1 1.4 L) of fuel remaining in the tank, the FUEL LEVEL LOW message will appear on the Driver Information Center (DIC) and a single chime will sound.
Here are a few concerns some owners have had about the fuel gage. All of these situations are normal and do not indicate that anything is wrong with the fuel gage: At the gas station the gas pump shuts off before the gage reads full. GAL FUEL USED on the DIC does not correspond exactly to the amount of fuel remaining as shown on the fuel gage. The gage may change when you turn, stop or accelerate quickly.
DriV G I 8H-Y Inin II IIU PaVP+aIP VGI I L G I This display gives you the status of many of your vehicle's systems. The DIC is also used to display driver personalization features andwarningktatus messages. All messages will appear in the DIC display, located at the bottom of the instrument panel cluster. DIC Controls and Displays *, ....
AVG MPH (Average Miles per Hour): This message shows the average speed you have traveled at since the last time you reset the value. To reset the value, press the INFO button to display AVG MPH then press and hold the INFO RESET button until 0.0 AVG MPH is displayed. TIMER: This feature is like a stopwatch, in that you can clock the time it takes to get from one point to another. To operate, press the INFO button to display TIMER. Each of the fields for the hours, minutes and seconds are two numeric digits.
MPG INST (Instantaneous Miles per Gallon): This message shows the instantaneous fuel economy which varies with your driving eondiiions, suck as acceieraiion, braking and the grade of the road being traveled. The INFO RESET button does not function in this mode. Battery Volts: This message shows the current battery voltage. If the voltage is normal the display will show BATTERY VOLTS OK. If the voltage drops below 10.5 volts, the display will show BATTERY VOLTS LOW.
DIC Warnings and Messages These messages will appear if there is a problem sensed in one of your vehicle’s systems. Vehicles that are first sold in Canada will have a number after each message. This number helps to identify the problem. You must then press INFO or INFO RESET to clear the display screen for further use.
CHANGE ENG!NE OIL - 82: This meams that the life of the engine oil has expired and it should be changed within 200 miies. After an oii change, the Oii Life Indicator must be reset. See Oil Life Indicator on page 3-79. See Engine Oil on page 5-13. CHANGE TRANS FLUID - 47: This message will appear when it is time to change the transaxle fluid. See Part A: Scheduled Maintenance Services onpage 6-4 for the proper fluid and change intervals.
The correct tire inflation pressure should be set to those shown on theTire Loading-InformationLabel, located on the rear edge of the driver’s door. For more information regarding proper tire inflation, see lnflation -- Tire Pressure on page 5-61. If a tire is low, youshould stop as soon as possible and inspect your tire(s) for damage. If a tire is flat, see If a Tire Goes Flat on page 5-71.
ENGINE COOLANT HOT, IDLE ENGINE - 44: I his message will appear when the engine coolant temperature is over 262°F (128°C). Stop and allow your vehicle to idle in PARK (P) until it cools down and the message is removed. Do not increase engine speed above a normal idle. If it does not cool down, turn off the engine and have it serviced before driving it again. Severe engine damage can result from an overheated engine. See Engine Overheating on page 5-27.
PASSENGER DOOR AJAR - 141: The right front passenger’s door is open or ajar when this message appears. The ignition must be in ON and the transaxle not in PARK (P) for this message to display. A chime will sound if the vehicle’s speed is greater than 3 mph (5 km/h). RIGHT REAR DOOR AJAR - 143: The right rear door is open or ajar when this message appears. The ignition must be in ON and the transaxle not in PARK (P) for this message to display.
SERVICE SUSPENSION SYS - 84: This message is displayed to indicate that the suspension system is not operating properly. To correct this problem, have your vehicle serviced at your dealership. SERVICE THEFT SYSTEM - 34: This message means there is a problem with the PASS-Key@Ill system. A fault has been detected in the system which means that the system is disabled and is not protecting the vehicle.
THEFT ATTEMPTED - 40: This message is displayed if the theft system has detected a break-in attempt while you were away from your vehicle. TOP SPEED FUEL CUT-OFF - 111: This message will appear when the Powertrain Control Module (PCM) detects that the maximum speed for your vehicle has been reached. The speed of your vehicle will surge as the fuel supply is cut off. Your vehicle’s top speed is based on the top speed rating of the tires.
CIimate Controls and Radio System Personalization These features allow both drivers to personalize their own climate control settings as well as their radio settings. For more information, see Climate Controls Personalization on page3-39 and Radio Personalization with Home and Away Feature on page 3- 102.
Remote Recall Memory 3. To turn on the feature, press the ON/OFF button until ON appears on the DIC display. To turn it off, press the ON/OFF button until OFF appears on the display. If your vehicle has the optional memory package, you will have this feature. This feature recalls any previously programmed seat and mirror controls when the unlock button on the remote keyless entry transmitter is pressed.
Programmable Modes Auto Exit Seat Mode 1: ON If your vehicle has the optional memory package, you will have this feature. This feature will move the driver’s seat to the previously programmed exit position when the ignition is turned off and the driver’s door is opened. Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory.
Auto Exit Steering Wheel If your vehicle has the optional memory package, you may have this feature also. This feature will move the steering column to the driver’s previously programmed exit position when the ignition is turned off and the driver’s door is opened. 3. To turn on the feature, press the ON/OFF button until ON appears on the DIC display. To turn it off, press the ON/OFF button until OFF appears on the display. Programmable Modes The mode you selected is now set.
Programmable Modes Lights Flash at Lock Mode 1: ON This feature allows the parking lamps to flash once when the remote keyless entry transmitter is used to lock the vehicle. All doors must be closed for this feature to work, and the lamps will not flash if the manual parking lamps or headlamps are active. Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 1. The mode to which the vehicle was programmed may have been changed since it left the factory.
The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. Horn Sounds at Lock This feature sounds the horn once when the remote keyless entry transmitter is used to lock the vehicle. All doors must be closed for this feature to work. Programmable Modes Mode 1: ON Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 2.
PrQgrammable Modes Doors Lock in Gear Mode 1: ON With the ignition in ON and a!! the doors closed, this feature allows the vehicle's doors to automatically lock when the driver shifts the transaxle out of PARK (P). Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 1. The mode to which ihe vehicle was programmed may have been changed since it left the factory.
Driver Unlock in PARK (P) This feature allows the driver’s door to automatically unlock when the vehicle is shifted into PARK (P). All other doors will remain locked until the unlock button on either front door armrest or on the remote keyless entry transmitter is pressed. 3. To turn on the feature, press the ON/OFF button until ON appears on the DIC display. To turn it off, press the ON/OFF button until OFF appears on the display. Programmable Modes The mode you selected is now set.
Doors Un!ock In PARK (P) This ieaiure will autornat‘icaliy unlockall doors when the vehicle is shifted in to PARK (P). Mode I : ON Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, do the following: 1.
Doors Unlock Key Off This feature will automatically unlock all doors when the ignition key is turned to OFF. Programmable Modes Mode 1: ON Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, do the following: 1.
MBrror to Curb !!I Reverse If your vehicle has the optior;al memory package, you will have this feature. This feature will move the passenger’s outside rearview mirror to a curb view position when the shift lever is placed in REVERSE (R), and it will return the mirror to the last known driving position when the shift lever is moved out of REVERSE (R). See Outside Curb View Assist Mirror on page 2-43 for more information. Programmable Modes Mode 1: ON Mode 2: OFF 1.
Tire Pressure Display 3. To turn on the feature, press the ON/OFF button until ON appears on the DIC display. To turn it off, press the ON/OFF button until OFF appears on the display. This feature will allow the individual tire pressure readings to be displayed when using the INFO button to scroll through the DIC displays. Even with this feature programmed to be turned off, a low or high tire pressure condition will still cause the CHECK TIRE PRESSURE message to be displayed on the DIC.
Oil Life Indicator Tc! see !he dlsp!ay, press the INFG buttor: s€?ve:al times until ENGINE OIL LIFE appears. If you see 99% ENGINE OIL LIFE, 99 percent of your current oil life remains. The DIC may display a CHANGE ENGINE OIL message. For more information, see Scheduled Maintenance on page 6-4. If you see CHANGE ENGINE OIL, it means the oil life is gone and you should change the oil right away. The system doesn’t check how much oil you have, so you’ll still have to check for that.
Audio System(s) Notice: Before you add any sound equipment to your vehicle - like a tape player, CB radio, mobile telephone or two-way radio - be sure you can add what you want. If you can, it’s very important to do it properly. Added sound equipment may interfere with the operationof your vehicle’s engine, Delphi Electronics radio or other systems, and even damage them. Your vehicle’s systems may interfere with the operationof sound equipment that has been added improperly.
Radio with Cassette and CD (Base Level) VOL (Volume): Turn this knob to increase or to decrease volume. HR (Hour) or MN (Minute): Display the time with the ignition off by pressing one of these buttons. XMTMRadio Satellite Service (USA Only): XMTM isa continental U S . based satellite radio service that offers 100 coast to coast channels including music, news, sports, talk and children's programming. XMTM provides digital quality audio and text information, including song title and artist name.
Finding a Station Setting Preset Stations BAND: Press this button to select weather, FM1, FM2, AM, or XM1, XM2 if your radio is equipped with XMTM Satellite Radio Service. The six numbered pushbuttons let you return to your favorite stations.
Setting the Tone (BassITreble) Finding - a PTY Station (XMTMOnly) TONE: Press and release this button until the desired tone control (bass, treble or midrange) appears on the display. The radio keeps separate tone settings for each band, preset and source. To select and find a desired PTY perform the following: 1. Press PTY. PTY will be displayed on the screen. 2. Select a category by pressing - LEVEL +. 3.
XMTMRadio Messaaes indicates content with explicit language. Your system is functioning correctly, but you are in a location that is blocking the XM signal. When you move into an open area, the signal should return. Loading XM Tune to another station.
Radio Display Message tion I No CAT Info i Action Required Category Name not available No category information is available at this time on this channel. Your system is working properly. There are no channels available for the category you selected. Your system is working properly. No text or informational messages are available at this time on this channel. Your system is working properly. The XM receiver in your vehicle may have previously been in another vehicle.
Playing a Cassette Tape With the radio on, insert a cassette tape. The tape will begin playing as soon as it is inserted. When one side of your cassette tape is done playing, auto reverse plays the other side of your cassette tape. A cassette tape may be loaded with the radiooff but it will not start playing until the radio is on. If you want to insert a cassette tape when the ignition is off, first press the eject button.
Cassette Tape Messages Playing a Cnrr?parrt If an error occurs while trying to play a cassette tape, it could be for one of the following reasons: Insert a disc partway into the slot, label side up. The player will pull it in. If the ignition and the radio are on and the underlined compact disc symbol appears on the display, the disc will begin playing. A compact disc may be loaded with the radio off but it will not start playing until the radio is on.
A (Eject): Press this button, located to the right of the CD slot, to stop a CD when it is playing or to eject a CD when it is not playing. Eject may be activated with the radio off and/or the ignition off. Radio with Cassette and CD (Up Level) Compact Disc Messages If the disc comes out, it could be for one of the following reasons: You’re driving on a very rough road. When the road becomes smoother, the disc should play. It’s very hot. When the temperature returns to normal, the disc should play.
This system relies upon receiving specific information from these stations and will only work when the information is available. In rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly. If this happenscontact the radio station. While you are tuned to an RDS station, the station name or the call letters will appear on the display instead of the frequency.
Finding a Station Setting Preset Stations BAND: Press this button to select weather, FMI, FM2, AM, or XMl, XM2 if your radio is equipped with XMTM Satellite Radio Service. The six numbered pushbuttons let you return to your favorite stations and associated tone and DSP settings. The RDS PTY mode must be off to use this mode.
Setting the Tone (BassTTreble) Using Digital Signal Processing (BSPl TOME: Press and release this button until the desired tone BASS, TREBLE or MIDRANGE appears on the display, The radio keeps separate tone settings for each band, preset (except weather band presets) and source. DSP: This feature is used to provide a choice of four different listening experiences: talk, front seat, ambience and spacious. DSPcan be used while listening to the radio, cassette, CD, orXMTM.Press this button to turn DSP on.
RDS Messages ALERT!: Alert warns of local or continental U.S.-based emergencies. When an alert announcement comes on the current radio station or a related network station, you will hear it, even if the volume is muted, a cassette tape or compact disc is playing, or if RDS mode is turned off. ALERT will appear on the display when an alert announcement plays. The radio uses TA volume during these announcements. To increase or to decrease volume, turn the PWRNOL knob.
For XMTM(USA only, if your radio is equipped with XiviT:vi Sateiiite Rauio Service), press this button while in XM mode to retrieve various pieces of information related to the current song or channel. By pressing and releasing the MSG button, you may retrieve four different categories of information: Artist Name/Feature, SonglProgram Title, Channel Category that may be broadcast on ?hat channel. Each of the four information types may have multiple pages of text.
XMTMRadio Messaaes Radio Display Message Condition Action Required XL (Explicit Language Channels) XL on the radio display, after the channel name, indicates content with explicit language. These channels, or any others, can be blocked at a customer’s request, by calling 1-800-852-XMXM (9696). XM Updating Updating encryption code The encryption code in your receiver is being updated, and no action is required. This process should take no longer than 30 seconds.
XMTMRadio Messages (cont’d) Radio Display i I I Action Required Condition Category Name not available No category information is available at this time on this channel. Your system is working properly. Not Found No channel available for the chosen category There are no channels available for the category you selected. Your system is working properly. No Information No Texthformational message available No text or informational messages are available at this time on this channel.
Playing a Cassette Tape With the radio on, insert a cassette tape. The tape will begin playing as soon as itis inserted. When oneside of your cassette tape is done playing,auto reverse plays the other side of your cassette tape. A cassette tape may be loaded with the radio off but it will not startplaying until the radio is on. If you want to insert a cassette tape when the ignition is off, first press the eject button.
Cassette Tape Messages If an error Qccurswhile trying te play 2 cassette tape, it could be one of the following has occurred: e Auto CrQ2 allows the cassette tape player to adjust to the type of cassette tape for clearer sound for CrQ2 cassette tapes. Playing a Compact Disc The cassette tape is tight and the cassette player cannot turn the hubs of the tape. Hold the cassette tape with the open end down and try turning the right hub counterclockwise with a pencil. Flip the tape over and repeat.
6 RDM (Random): Press this pushbutton to listen to the tracks in random instead of sequential order. RDM will appear on the display. Press RDM to turn off random play. RDM will disappear from the display. 7K SEEK Y : Press the up or the down arrow to seek to the next or to the previous track. SIDE: Press this pushbutton to play a CD when listening to the radio. SCAN: Press this button to listen to tracks for a few seconds.
66%
1 L Once you have loaded the discs in the magazine, slide open the door of the compact disc (CD) changer. Push the magazine into the changer in the direction of the arrow marked on top of the magazine. 3-100 Close the door by sliding it all the way to the right. When the door is closed, the changer will begin checking for discs in the magazine. This will continue for up to one and a half minutes, depending on the number of discs loaded.
Whenever a CD magazine with discs is loaded in the changer, ine CD cnanger symboi will appear on the radio display. If the CD changer is checking the magazine for CDs, the CD symbol will flash on the display until the changer is ready to play. When a CD begins playing, a disc and track number will be displayed. The disc numbers are listed on the front of the magazine. Features of CD changer may be different due to your vehicles audio system.
Compact Disc Changer Errors CD CHANGER ERROR: This message may be displayed for one of the following reasons: You’re driving on a very rough road. When the road becomes smoother, the disc should play. The disc is dirty, scratched, wet or loaded label side up. The air is very humid. If so, wait about an hour and try again. If any error occurs repeatedly or if an error cannot be corrected, contact your dealership.
comes on, the away presets will be active. To select the home presets, press and hold RW for five seconds until y o ~hear i a beep. The next time the radio comes on, the home presets will be active. Some audio controls can be adjusted at the steering wheel. They include the following: When battery power is removed and later applied, you will not have to reset your home radio presets because the radio remembers them. However, you will have to reset your away radio presets.
Understanding Radio Reception Cellular Phone Usage The range for most AM stations is greater than for FM, especially at night. The longer range, however, can cause stations to interfere with each other. AM can pick up noise from things like storms and power lines. Try reducing the treble to reduce this noise if you ever get it. Cellular phone usage may cause interference with your vehicle’s radio.
Your tape player should be cleaned regularly after every 50 hours of use. Your radio may display CLEAN TAPE to indicate that you have used your ‘rape piayer for 50 hours without resetting the tape clean timer. If this message appears on the display, your cassette tape player needs to be cleaned. It will still play tapes, but you should clean it as soon as possibie to prevent damage to your tapes and player.
Care of Your CDs Handle discs carefully. Store them in their original cases or other protective cases and awayfrom direct sunlight and dust. If the surface of a disc is soiled, dampen a clean, soft cloth in a mild, neutral detergent solution and clean it, wiping from the center to the edge. Be sure never to touch the side without writing when handling discs. Pick up discs by grasping the outer edges or the edge of the hole and the outer edge.
Section 4 Driving Your Vehicle Your Driving. the Road. and Your Vehicle ..........4-2 Defensive Driving ...........................................4.2 Drunken Driving ............................................. 4.2 Control of a Vehicle ........................................ 4-5 Braking ......................................................... 4-6 Traction Control System (TCS) ......................... 4-9 Continuous Variable Road Sensing Suspension (CVRSS) .................................
Your Driving, the Road, and Your Vehicle Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 1-9. Defensive driving really means “be ready for anything.” On city streets, rural roads or freeways, it means “always expect the unexpected.” Assume that pedestrians or other drivers are going to be careless and make mistakes. Anticipate what they might do.
Many adults - by some estimates, nearly half the adult population - choose never to drink alcohol, so they never drive after drinking. For persons under 21, it’s against the law in every U S . state to drink alcohol. There are good medical, psychological and developmental reasons for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive.
There is a gender difference, too. Women generally have a lower relative percentage of body water than men. Since alcohol is carried in body water, this means that a woman generally will reach a higher BAC level than a man of her same body weight when each has the same number of drinks. of 0.05 percent or above. A driver with a BAC level of 0.06 percent has doubled his or her chance of having a collision. At a BAC level of 0.
Drinkingand t n driving is ? r y dangerous. Your reflexes, perceptions, attentiveness and judgement can be affected by even a small amount of alcohol. You can have a serious-or even fatal-collision if you drive after drinking. Please don’t drink and drive or ride with a driver who has been drinking. Ride home in a cab; or if you’re with a group, designate a driver who will not drink. You have three systems that make your vehicle go where you want it to go.
Braking Braking action involves perception time and reaction time. First, you have to decide to push on the brake pedal. That’s perception time. Then you have to bring up your foot and do it. That’s reaction time. Average reaction time is about 3/4 of a second. But that’s only an average. It might be less with one driver and as long as two or three seconds or more with another. Age, physical condition, alertness, coordination and eyesight all play a part. So do alcohol, drugs and frustration.
Your vehic!e has anti-lock brakes. ABS is an advanced electronic braking system that will help prevent a braking skid. When you start your engine and begin to drive away, your anti-lock brake system will check itself. You may hear a momentary motor or clicking noise while this test is going on, and you may even notice that your brake pedal moves a little. This is normal. If there’s a problem with the anti-lock brake system, this warning light will stay on.
The anti-lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around theobstacle while braking hard. Remember: Anti-lock doesn't change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you won't have time to apply your brakes if that vehicle suddenly slows or stops.
Traction Control System (TCS) Your vehic!e has a traction control system that ! h i t s wheel spin. This is especially useful in slippery road conditions. The system operates only if it senses that one or both of the front wheels are spinning or beginning to lose traction. When this happens, I the system works the front brakes and reduces engine States power to limit wheel spin.
To turn the system off, press the TRAC ON/OFF button located on the center console. (For vehicles with a column shift lever, the button is located at the end of the shift lever.) The TRACTION OFF message will display on the Driver Information Center. If the system is limiting wheel spin when you press the button, the TRACTION OFF message will display - but the system won’t turn off right away. It will wait until there’s no longer a current need to limit wheel spin.
Steering Power Steering If you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort. Magnetic Speed Variable Assist Steering System This system continuously adjusts the effort you feel when steering at all vehicle speeds. It provides ease when parking, yet a firm, solid feel at highway speeds. Steering Tips Driving on Curves It’s important to take curves at a reasonable speed.
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you. You can avoid these problems by braking - if you can stop in time. But sometimes you can’t; there isn’t room. That’s the time for evasive action - steering around the problem.
Off-Road Recovery Passina You mayfind that your right wheels have dropped off the edge of aroad onto theshoulder while you’re driving. The driver of a vehicle about to pass another on a two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again.
0 Do not get too close to the vehicle you want to pass while you’re awaiting an opportunity. For one thing, following too closely reduces your area of vision, especially if you’re following a larger vehicle. Also, you won’t have adequate space if the vehicle ahead suddenly slows or stops. Keep back a reasonable distance. When it looks like a chance to pass is coming up, start to accelerate but stay in the right lane and don’t get too close.
Skidding In a skid, a driver can lose control of the vehicle. Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not “overdriving” those conditions. But skids are always possible. The three types of skids correspond to your vehicle’s three control systems. Inthe braking skid, your wheels aren’t rolling.In the steering or cornering skid, too much speed orsteering in a curve causestires to slip and lose cornering force.
Driving at Night Here are some tips on night driving. Drive defensively. Don’t drink and drive. Since you can’t see as well, you may need to slow down and keep more space between you and other vehicles. Slow down, especially on higher speed roads. Your headlamps can light up only so much road ahead. In remote areas, watch for animals. If you’re tired, pull off the road in a safe place and rest. No one can see as well at night as in the daytime. But as we get older these differences increase.
You can be temporarily blinded by approaching headlamps. It can take a second or two, or even several seconds, for your eyes to readjtist to the dark. When you are faced with severe glare (as from a driver who doesn’t lower the high beams, or a vehicle with misaimed headlamps), slow down a little. Avoid staring directly into the approaching headlamps. Keep your windshield and all the glass on your vehicle clean - inside and out. Glare at night is made much worse by dirt on the glass.
The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, a heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road and even people walking. It’s wise to keep your windshield wiping equipment in good shape and keep your windshield washer tank filled with washer fluid.
Hydroplaning Hydroplaning is dangerous. So much water can btiiid up under your tires that they can actually ride on the water. This can happen if the road is wet enough and you’re going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road. Hydroplaning doesn’t happen often. But it can if your tires do not have much tread or if the pressure in one or more is low. It can happen if a lot of water is standing on the road.
City Driving One of the biggest problems with city streets is the amount of traffic on them. You’ll want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: 0 Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip. Try to use the freeways that rim and crisscross most large cities. You’ll save time and energy.
At the entrance, there is usually a ramp that leads to the freeway. If you havea clear view of the freeway as you drive along the entrance ramp, you should begin to check traffic. Tryto determine where youexpect to blendwith the flow. Try to merge into the gap at close to the prevailing speed. Switch on your turn signal, check your mirrors and glance over your shoulder as often as necessary. Try to blend smoothly withthe trafficflow.
The exit ramp can be curved, sometimes quite sharply. The exit speed is usually posted. Reduce your speed according to your speedometer, not to your sense of motion. After driving for any distance at higher speeds, you may tend to think you are going slower than you actually are. Before Leaving on a Long Trip Make sure you’re ready. Try to be well rested. If you must start when you’re not fresh - such as after a day’s work - don’t plan to make too many miles that first part of the journey.
Highway Hypnosis - - Hill and Mountain Roads Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against thevehicle that can make you sleepy.
If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable. Keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system and transaxle. These parts can work hard on mountain roads. Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all thework of slowing down. They could get so hot that they wouldn’t workwell.
Winter Driving Here are some tips for winter driving: = Eave your veilicie in gooa snape tor winter. You may want to put winter emergency supplies in your trunk. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cio-in ana a coupie oi retiectlve warning triangles.
Driving on Snow or Ice Most of the time, those places where your tires meet the road probably have good traction. However, if there is snow or ice between your tires and the road, you can have a very slippery situation. You’ll have a lot less traction or “grip” and will need to be very careful. What’s the worst time for this? “Wet ice.’’ Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all.
Your anti-lock brakes improve your vehicle’s stability when you make a hard stop on a slippery road. Even though you have the anti-!ock braking system, you’ll want to begin stopping sooner than you would on dry pavement. See Braking on page 4-6. If You’re Caughf In a B!izzard Allow greater following distance on any slippery road. Watch for slippery spots. The road might be fine until you hit a spot that’s covered with ice.
Here are some things to do to summon help and keep yourself and your passengers safe: Turn on your hazard flashers. Tie a red cloth to your vehicle to alert police that you’ve been stopped by the snow. @ Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body insulators from newspapers, burlap bags, rags, floor mats - anything you can wrap around yourself or tuck under your clothing to keep warm. You can run the engine to keep warm, but be careful.
Snow can trap exhaust gasesunc,.’ your vehicle. This can cause deadlyCO (carbon monoxide) gas to get inside.CO could overcome you and killyou. You can’t see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking your exhaust pipe. And check around again from time to time to be sure snow doesn’t collect there. Open a window just a little on the side of the vehicle that’s away from the wind. This will help keep CO out.
If You Are Stuck: In Sand, Mud, Ice or Snow In order to free your vehicle when it is stuck, you will need to spin the wheels, but you don’t want to spin your wheels too fast. The method known as “rocking” can help you get out when you’re stuck, but you must use caution. _ _ joc .>t you. h e s spin at hign speed, they canexplode,and youorotherscouldbe injured. And, the transaxle or other parts of the vehicle can overheat. That could cause an engine compartment fire or otherdamage.
Here are sn*e impQrtant things tQ consider before you do recreational vehicle towing: Towing Your Vehicle Consult your dealer or a professional towing service if you need to have your disabled vehicle towed. See Roadside Service on page 7-5. If you want to tow your vehicle behind another vehicle for recreational purposes (such as behind a motorhome), see Recreational Vehicle Towing following.
Dolly Towing Loading Your Vehicle 1 -. TIRE-LOADING INFORMATION FRT. CTR, RR. TOTAL 0 0 0 0 Your vehicle can be towed using a dolly. To tow your vehicle using a dolly, follow these steps: 1. Put the front wheels on the dolly. 2. Put the vehicle in PARK (P). 3. Set the parking brake and then remove the key. 4. Clamp the steering wheel in a straight-ahead position. 5. Release the parking brake. 4-32 Two labels on your vehicle show how much weight it may properly carry.
-. f DATE MFD BY GENERAL MOTORS CORP GWR GAWR FRI L I Do not load yc,: ~ The other label is the Certification label, found on the rear edge of the driver's door. It tells you the gross weight capacity of your vehicle, called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. Never exceed the GVWR for your vehicle or the Gross Axie vveignt Rating (tiAWK) tor either the front or rear axle. vehicle ar.
Towing a Trailer lingsyou p--- insideyr vs- iclecan ! and injure people in a sudden stop or turn, or in a crash. Put things in the trunk of your vehicle.In a trunk, put them as far forward as you can. Try to spread the weight evenly. Never stack heavier things, like suitcases, inside the vehicleso that some of them are above the tops of the seats. Don’t leave an unsecured child restraint in your vehicle. When you carry something inside the vehicle, secure it whenever you can.
That’s the reason for thispart. In it are many time-tested, important trailering tips and safety rules. Many of these are important for y o ~ safety r and that of y w r passengers. So please read this section carefully before you pull a trailer. Load-pulling components such as the engine, transaxle, wheel assemblies and tires are forced to work harder against the drag of the added weight. The engine is required to operate at relatively higher speeds and under greater loads, generating extra heat.
Weight of the Trailer Weight of the Trailer Tongue How heavy can a trailer safely be? The tongue load (A) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in the vehicle. And if you tow a trailer, you must add the tongue load to the GVW because your vehicle will be carrying that weight, too.
If you’re using a weight-carrying hitch or a weight-distributing hitch, the trailer tongue (A) should weigh 10 - 15 percent of the teta! !caded trailer weight (B). After you’ve loaded your trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper. If they aren’t, you may be able to get them right simply by moving some items around in the trailer. Total Weight on Your Vehicle’s Tires Be sure your vehicle’stires are inflated to the upper limit for cold tires.
Trailer Brakes Following Distance Because you have anti-lock brakes, don’t try to tap into your vehicle’s hydraulic brake system. If you do, both brake systems won’t work well, or at all. If you tow more than 1,000 Ibs. (450 kg), use trailer brakes. Be sure to follow the instructions that come with the trailer or from the brake manufacturer. Stay at least twice as far behind the vehicle ahead as you would when driving your vehicle without a trailer.
Turn Signals When Towing a Trailer When you tow a trailer, your vekIc!e may need a different turn signal flasher and/or extra wiring. Check with your dealer. The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, the trailer lamps will also flash, telling other drivers you're about to turn, change lanes or stop. When towing a trailer, the arrows on your instrument panel will flash for turns even if the bulbs on the trailer are burned out.
When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: startyour engine shift into a gear, and 0 make sure the parking brake has released. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of the chocks. 4. Stop and have someone pick up and store the chocks. Maintenance When Trailer Towing Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance Schedule for more on this.
Section 5 Service and Appearance Care Service ........................................................ 5.3 Doing Your Own Service Work ......................... 5-4 Adding Equipment to the Outside of Your Vehicle ...................................................... 5.4 Fuel ......................... ............................... -5-5 Gasoline Octane ............................................ 5.5 Gasoline Specifications .................................... 5.5 California Fuel ........................
Section 5 Service and Appearance Care Wheel Alignment and Tire Balance ..................5-68 Wheel Replacement ..................................... 5-69 Tire Chains .................................................. 5.70 If a Tire Goes Flat ........................................ 5-71 Changing a Flat Tire ..................................... 5-72 Compact Spare Tire ...................................... 5.83 Appearance Care ............................................ 5.
Doing Your Own Service Work If you want to do some of your own service work, you’ll want to use the proper service manual. It tells you much more about how to service your vehicle than this manual can. To order the proper service manual, see Service Publications Ordering Information on page 7-10. Your vehicle has an air bag system. Before attempting to do your own service work, see Servicing Your Air Bag-Equipped Vehicle on page 1-59.
Fuel Gasoline Soecifications ------ Use of the recommended fuel is an importan: pad of the Droper maintenance of your vehicle. It is recommended that gasoline meet specifications which were developed by the American Automobile Manufacturers Association and endorsed by the Canadian Vehicle Manufacturers Association for better vehicle performance and engine protection.
California Fuel If your vehicle is certified to meet California Emission Standards (see the underhood emission control label), it is designed to operate on fuels that meet California specifications. If this fuel is not available in states adopting California emissions standards, your vehicle will operate satisfactorily on fuels meeting federal specifications, but emission control system performance may be affected.
Filling - Your Tank Fuel vapor is highly flammable. It burns violently, and that can cause very bad injuries. Don’t smoke if you’re near fuel or refueling your vehicle. Keep sparks, flames and smoking materials away from fuel. The fuel cap is located behind a hinged door on driver’s side of your vehicle.
An alternate fuel door release is located inside of the trunk on the driver’s side. Pull it to release While refueling, hang the fuel cap by the tether from the hook on the filler door. To remove the fuel cap, turn it slowly to the left (counterclockwise).The fuel cap hasspring in it; if you let go of the cap too soon, it wil Iring back to the right. If you get fuel on yourself and then something ignites it, you could be badly burned. Fuel can spray out on you if you open the fuel cap too quickly.
When you put the fuel cap back on, turn it to the right (clockwise) until you hear a clicking sound. Make sure you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. See Malfunction Indicator Lamp on page 3-50. The CHECK GAS CAP message in the Driver Information Center (DIC) will come on if the fuel cap is not properly reinstalled.
Checking Things Under the Hood I An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing and tools away from any underhood electric fan. 5-10 1 Things that burn can get on ho. ,,,,ine parts and start a fire. These include liquids likefuel, oil, coolant, brake fluid, windshieldwasher and other fluids, and plastic or rubber. You or others could be burned. Be careful not to drop or spill things that will burn ontoa hot engine.
Hood Release To lift the hood llse the foliowing steps: 1. Pull the lever inside the vehicle to open the hood. It is located on the lower left side of the instrument panel. Vehicle without Night Vision shown f 1 2. Then go to the front of the vehicle and find the secondary hood release lever. The lever is located under the bottom edge of the grille. Move the release lever and raise the hood. Before closing the hood, be sure all filler caps are on properly. Then pull the hood down and close it firmly.
A. Windshield Washer Fluid Reservoir 6. UnderhoodFuseBlock C. Engine Coolant Surge Tank and Pressure Cap D. Power Steering Fluid E. Engine Oil Fill Cap F. Engine Oil Dipstick G. Brake Master Cylinder H. Transaxle Fluid Cap and Dipstick I. EngineAir CleanedFilter c If the CHECK OIL LEVEL message appears on the instrument cluster, it means you need to check your engine oil level right away. For more information, see "CHECK OIL LEVEL" under DIC Warnings and Messages on page 3-60.
Checking Engine Oil It’s a good idea to check your engine oil every time you get fuel. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick is located behind the radiator on the driver’s side of the vehicle. The handle is a yellow loop. For more information on location see Engine Compartment Overview on page 5-12. 5-14 Turn off the engine and give the oil several minutes to drain back into the oil pan.
When to Add Engine Oil If the oil is at or below the cross-hatched area at the tip of thedipstick,thenyou’ll need to add at least one quart of oil. But you must use the right kind. This part explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications on page 5- 101 I ~ The engine oil fill cap is located behind the radiator 013 the passenger’sside of the vehicle. For more information on location, see Engine Compartment Overview on page 5-72.
What Kind of Engine Oil to Use Oils recommended for your vehicle can be identified by looking for the starburst symbol. This symbol indicates that the oil has been certified by the American Petroleum Institute (API). Do not use any oil which does not carry this starburst symbol. LOOK FOR THIS SYMBOL HOT WEATHER If you chooseto perform the engine oil change service yourself, be sure the oil you use hasthe starburst symbol on the front of the oil container.
As in the chart shown previously, SAE 5W-30 is the only viscosity grade recommendedfor your vehicle. You should look for and use only oils which have the API Starburst symbol and which are also identified as SAE 5W-30. If you cannot find such SAE 5W-30 oils, you can use an SAE IOW-30 oil which has the API Starburst symbol, if it's going to be 0°F (-18°C) or above. Bo not use other viscosity grade oils, such as SAE IOW-40 or SAE 20W-50 under anyconditions.
How to Reset the CHANGE ENGINE OIL Message The GM Oil Life SystemTMcalculates when to change your engine oil and filter based onvehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you changeyour oil prior to a CHANGE ENGINE OIL message in theDriver Information Center (DIC) being turned on, reset the system. After the oil has been changed, the CHANGE ENGINE OIL message must be reset.
Engine Air CleanerFilter The engine air cleaner/filter is located on the driver’s side of the vehicle. For more information on location, see Engine Compartment Overview on page 5-12. Be sure the engine has cooled before following these steps to replace the engine air cleaner/filter: 3. Remove the engine air cleanedfilter element and any loose debris that may be found in the air cleaner base. 4. Replace the air filter element. 1.
Follow these steps to reinstall the cover to the engine air cleanedfilter housing: 1. Align the three tabs located on the back of the cover with the three slots on the back of the housing. 2. Push the cover slightly down and towards the engine to engage the tabs in the slots and align the two wing screws. 3. Engage and tighten the two wing screws on the top of the engine air cleanedfilter housing cover. Operating the engine with the air cleaner/filter off can cause you or others tobe burned.
Automatic Transaxle Fluid A good time to check your automatic transaxle fluid level is when the engine oil is changed. Change both the fluid and filter every 50,000 miles (83 000 km) if the vehicle is mainly driven under one or more of these conditions: In heavy city traffic where the outside temperature regularly reaches 90" F (32" C ) or higher. In hilly or mountainous terrain. When doing frequent trailer towing. Uses such as found in taxi, police or delivery service. Use such as limousine service.
Checking the Fluid Level Prepare you vehicle as follows: Park your vehicle on a level place. Keep the engine running. With the parking brake applied, place the shift lever in PARK (P). 1. After removing the engine air cleaner/filter assembly to reach the transaxle fluid cap, turn the cap counterclockwise to remove. Pull out the dipstick and wipe it with a clean rag or paper towel. 2. Push it back in all the way, wait three seconds, and then pull it back out again.
Refer to the Maintenance Schedule to determine what kind of transaxle fluid to use. See Part D: Recommended Fluids and Lubricants on page 6-15. If the fluid level is low, add only enough of the proper fluid to bring the level into the cross-hatched area on the dipstick. 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid at the dipstick hole to bring it to the proper level. It doesn’t take much fluid, generally less than one pint (0.5 L). Don’t overfill.
Engine Coolant The cooling system in your vehicle is filled with DEX-COOL@engine coolant. This coolant is designed to remain in your vehicle for 5 years or 150,000 miles (240 000 km), whichever occurs first, if you add only DEX-COOL@ extended life coolant. The following explains your cooling system and how to add coolant when it is low. If you have a problem with engine overheating, see Engine Overheating on page 5-27.
Adding only pain water to your cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. Your vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you wouldn’t get the overheat warning. Your engine could catch fire and you or others could be burned. Use a 50/50 mixture of clean, drinkable water and DEX-COOL@coolant.
. rn Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure cap - even a little- when the engine and radiator are hot. The vehicle must be on a level surface. When your engine is cold, the coolant level should be at the FULL COLD mark, located on the side of the surge tank that faces the engine.
Coolant Surae Tank Pressure Cata v I- Notice: Your pressure cap is a pressure-type cap and must be tightly installed to prevent coolant loss and possible engine damage from overheating. See “Capacities and Specifications” for more information. Engine Overheating You will find an ENGINE COOLANT HOT, IDLE ENGINE message or an ENGINE OVERHEATED, STOP ENGINE message displayed in the Driver Information Center (DIC). You will also hear a chime.
If Steam Is Coming From Your Engine everyone away from the vehicleuntil it cools down. Wait until there is no sign of steam or coolant before you open thehood. If you keep driving when your engine is overheated, the liquids in it can catch fire. You or others couldbe badly burned. Stop your engine if it overheats, and get out of the vehicle until the engine is cool. See “Overheated Engine Protection Operating Mode” in the Index for information on driving t o a safe place in an emergency.
If No Steam Is Corning - From Your Engine An overheat warning, along with a low coolant message, can indicate a serious problem. See DlC Warnings and Messages on page 3-60. If you get an engine overheat warning with no low coolant message, but see or hear no steam, the problem may not be too serious. Sometimes the engine can get a little too hot when you: Climb a long hill on a hot day. Stop after high-speed driving. Idle for long periods in traffic. Tow a trailer.
Cooling System When you decide it’s safe to lift the hood, here’s what you’ll see: I An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan. If the coolant inside the coolant surge tank is boiling, don’t do anything else until it cools down. The vehicle should be parked on a level surface. A. Coolant Surge Tank with Pressure Cap B.
A low coolant level should be indicated by a CHECK COOLANT LEVEL message on the Driver Information Center. If it is, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump or somewhere else in the cooling system. Heater and radiator hoses, and other engine parts, can be very hot. Don’t touch them. If you do, you can be burned. Don’t run the engine if there is a leak. If you run the engine, it could lose all coolant.
I f no coolant is visible in the surge tank, add coolant as follows: Steam and scalding liqui,, from a hot cool J system can blow out and burn you badly.They are under pressure, and if you turn the coolant surge tank pressure cap even a little-- they can come outat high speed. Never turn the cap when the cooling system, including the coolant surge tank pressurecap, is hot. Wait for the cooling system and coolant surge tank pressure cap to cool if you ever have to turn the pressure cap.
v e h l r ; s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you wouldn’t get the overheat warning. Your engine could catch fire and you or others could be burned. Use a 50/50 mixture of clean, drinkable water and DEX COOL@coolant. Nofice; In cold weather, water can freeze and crack the engine, radiator, heater core and other parts. Use the recommended coolant and the proper coolant mixture.
2. Then keep turning the cap, but now push down as you turn it. Remove the pressure cap. 5-34 3. Then fill the coolant surge tank with the proper mixture to the full cold fill mark on the side of the coolant surge tank.
4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fans. By this time, the coolant level inside the coolant surge tank may be lower. If the level is lower, add more of the proper mixture to the coolant surge tank until the level reaches about 4.5 inches (1 1.4 cm) from the top of the filler neck. 5. Then replace the pressure cap. Be sure the arrow on the pressure cap lines up like this.
Power Steering Fluid When to Check Power Steering Fluid It is not necessary to regularly check power steeringfluid unless you suspect there is a leak in the system or you hear an unusual noise. A fluid loss in this system could indicate a problem. Have the system inspected and repaired. How to Check Power Steering Fluid Turn the key off, let the engine compartment cool down, wipe the cap and the top of the reservoir clean, then unscrew the cap and wipe thedipstick with a clean rag.
Windshield Washer Fluid Notice: e When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. e Don’t mix water with ready-to-use washer fluid. Water can cause the solutionto freeze and damage your washer fluid tank and other parts of the washer system.Also, water doesn’t clean as wellas washer fluid. e Fill your washer fluid tank only three-quarters full when it’s very cold.
Brakes Brake Fluid should have your brake system fixed, since a leak means that sooner or later your brakeswon’t work well, or won’t work at all. So, it isn’t a good idea to “top o f f your brake fluid. Adding brake fluid won’t correct a leak. If you add fluid when your linings are worn, then you’ll have too much fluid when you get new brake linings. You should add (or remove) brake fluid, as necessary, only when work is ne on the brakehydraulicsystem.
What to Add Notice: Using the wrong fluid can badly damage brake system parts. For example, just a few drops of mineral-based oil, such as engine oil,in your brake system can damage brake system parts so badly that they’ll haveto be replaced. Don’t let someone put in the wrong kind of fluid. When you do need brake fluid, use only DOT-3 brake fluid. Use new brake fluid from a sealed container only. See Part D: Recommended Fluids and Lubricants on page 6- 15.
Brake Wear Your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving (except when you are pushing on the brake pedal firmly). Properly torqued wheel nuts are necessary to help prevent brake pulsation.
For example, if someone puts in brake linings that are wrong for your vehicle, the balance between your front and rear brakes can change - for the worse. The braking performance you’ve come to expect can change in many other ways if someone puts in the wrong replacement brake parts. Battery Your new vehicle comes with a maintenance free ACDelco@ battery. When it’stime for a new battery, get one that has the replacement number shown on the original battery’s label. We recommend an ACDelco battery.
Vehicle Storage If you’re not going to drive you vehicle for 25 days or more, remove the black, negative (-) cable from the battery. This will help keep your battery from running down. B eries have acid that can burn you and gas that can explode. You can be badly hurt if you aren’t careful. See “Jump Starting” nextfor tips on working around a battery without getting hurt.
Jump Starting If you cannot start your vehicle afid you are unabie io remove your key from the ignition, see Shift Lock Release under Automatic Transaxle Operation on page 2-27. If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to follow the steps below to do it safelv~ ,,tteries can hurt LA. They can be dangerous because: 0 They contain acid that can burn you. They contain gas that can explode or ignite.
Notice; If you leave your radio on, it could be badly damaged. The repairs wouldn’t be covered by your warranty. 3. Turn off the ignition on both vehicles. Unplug unnecessary accessories plugged into the cigarette lighter or in the accessory power outlets. Turn off the radio and all lamps that aren’t needed. This will avoid sparks and help save both batteries. And it could save your radio! 4. Open the hoods and locate the positive (+) and negative (-) terminal locations on the other vehicle.
Using a mat& -.ear a --ttery can cause ,-ttery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. -.ttery contains acid that L.. --. .. ,ou. Don’t get it on you. If you accidentally get it in your eyes or on your skin, flush the place with water and get medical help immediately. Be sure the battery has enoughwater. You don’t need to addwater to the ACDelco@ battery installed in your new vehicle.
5. Check that the jumper cables don’t have loose or missing insulation. If they do, you could get a shock. The vehicles could also be damaged, too. Before you connect the cables, here are some basic things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one. Negative (-) will go to a heavy, unpainted metal engine part or to a remote negative (-) terminal if the vehicle has one.
8 ; Now connect the black negative (-) cable to the negative (-) terminal location of the vehicle with the good battery. Use a remote negative (-) terminal if the vehicle has one. Don’t let the other end of the cable touch anything until the next step. The other end of the negative (-) cable doesn’t go to the dead battery. It goes to a heavy, unpainted metal engine part or to a remote negative (-) terminal on the vehicle with the dead battery.
Nofke: Damage to your vehicle may result from electrical shorting if jumper cables are removed incorrectly. To prevent electrical shorting, take care that the cables don’t touch each other or any other metal. The repairs wouldn’t be covered by your warranty. To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative (-) cable from the vehicle that had the dead battery. 2. Disconnect the black negative (-) cable from the vehicle with the good battery. 3.
you take your vehicle to your dealer for service. However, it is possible for you to re-aim your headlamps as described in the foiiowing procedure. Notice: To make sure your headlamps are aimed properly, read all the instructions before beginning. Failure to follow these instructions could cause damage to headlamp parts. The vehicle should be properly prepared as follows: The vehicle should be placed so the headlamps are 25 ft, (7.6 m) from a light colored wall or other flat surface.
Headlamp aiming is done with the vehicle low-beam lamps. The high-beam lamps will be correctly aimed if the low-beam lamps are aimed properly. The headlamp aiming devices are under the hood near the headlamps. If you believe your headlamps need horizontal (IeWright) adjustment, follow the horizontal aiming procedure. If you believe your headlamps need only vertical (up/down) adjustment, follow only the vertical aiming procedure.
1. Find the aim dot on thelens of the low beam lamps. 2. Measure the distance from the ground to the aim dot on each lamp; if left low beam, subtract two inches. Record this distance. 3. At the wall or other flat surface, measure from the nr-1 lnrJ ~ ~ n \ ~ r o thn r r l LIIU y#wusau U ~ Y I U ~ U vnc-nr,JnA A:-+---- I U V W I U ~uU 1 3 L U l I l r G S--I?&-I I U I I I JLGp and draw or tape a horizontal line the width of the vehicle. 0 L 4.
6. Repeat Steps4 and 5 for the opposite headlamp. 5. Turn the vertical aiming screw (C) until the headlamp beam is aimed to the horizontal tape line. The top edge of the cut-off should be positioned at the bottom edge of the horizontal tape line.
Bulb Replacement For the proper type of replacement bulb, see Replacement Bulbs on page 5-58. For any bulb changing procedure not listed in this section, contact your dealer. Headlamps i.To access the headlamps, remove all of the push-pins that hold the filler panel cover in place. Halogen Bulbs H,.age., ,,,bs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package. 2.
3. Remove the two bolts at the top of the headlamp assembly. 4. Loosen the bolt at the bottom of the headlamp assembly. 5-54 5. Use a tool to help pry the headlamp assembly away from the vehicle.
7. Remove the bulb socket dust cover. 6. Firmly grasp the outboard side of the headlamp assembly with both hands and pull hard enough so that the whole assembly separates from the vehicle. 8. Turn the headlamp housing socket counterclockwise to unlock the socket from the lamp housing.
9. Pull the old bulb out of the socket. To reinstall the filler panel, do the following: 1. Place the filler panel in the correct location. 2. Reset each push-pin by holding each by the outer circle while pushing up on the pin assembly from below. The center portion of the push-pin should now be above the outer circle. 3. After placing each push-pin into the opening, press down on the outer circle until it is seated against the surface of the filler panel. 10. Install the new bulb into the socket.
- Front TurnSianal, Sidemarker, Parking and Cornering Lamps 1. The turn signal lamps are located beside the headlamp bulbs. To access, lift off the bulb socket dust cover. See Steps 1 through 6 under Headlamps on page 5-53. 3. Remove the turn signal lamp housing socket and replace the bulb. 4. Reverse Steps 1 and 2 to reinstall. 2. Press the tab down and turn the housing socket clockwise to unlock the socket from the lamp housing.
Center High-Mounted Stoplamp (CHMSL) Replacement Bulbs For any bulb not listed here, contact your dealer. It is recommended that this component be replaced as a unit. See your dealer. Taillamps, Turn Signal, and Stoplamps It is recommended that this component be replaced as a unit. See your dealer.
Windshield wioer B!ade Replacement I’ Windshield wiper blades should be inspected at least twice a year for wear or cracking. See “Wiper Blade Check” under At Least Twice a Year on page 6-10. It’s a good idea to clean or replacethe wiper blade assembly on a regular basis or when worn. For proper windshield wiper blade length and type, see Normal Maintenance Replacement Parts on page5- 103. To replace the wiper blade assembly, do the following: 1. Turn the ignition to ACCESSORY and turn the wipers on.
Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and whereto obtain service, see your Cadillac Warranty booklet for details. Poorly maintained and improperly used tires are dangerous. Overloading your tires can cause overheating as a result of too much friction. You could have an air-out and a serious accident. See “Loading Your Vehicle” in the Index.
Inflation -- Tire Pressure The Tire-Loading Information label, which is located or! the rear edge of the driver’s side rear door, shows the correct inflation pressures for yourtires when they’re cold. “Cold” means your vehicle has been sitting for at least three hours or driven no more than 1 mile (1.6 km). If you’ll be driving at high speeds (e.g.
How to Check Use a good quality pocket-type gage to check tire pressure. You can’t tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they’re underinflated. This device complies with RSS-210 of Industry and Science Canada.
Once a low or high tire pressure condition is detected, the TPM system will display the CHECK TIRE MESSAGE each time the engine is started, until the tire(s) are set to the correct inflation pressure. If the DIC display doesn’t show tire pressures or the SERVICE TPM SYSTEM message appears, see your dealer for service. The TPM system may not work properly while the compact spare tire is installed.
Tire Inspection and Rotation Tires should be rotated every 7,500 miles (12 500 km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 5-65and Wheel Replacement on page 5-69 for more information. The purpose of regular rotation is to achieve more uniform wear for all tires on the vehicle.
Rustordirta wheel, Ir on the parts to which it is fastened, can make wheel nuts become loose after a time. The wheelcould come off and cause an accident. When you change a wheel, remove any rust or dirt from places where the wheel attachesto the vehicle. In an emergency, you can use a cloth or a paper towel to do this; but be sure to use a scraper or wire brush later, if you need to, to get all the rust or dirt off. See “Changing a Flat Tire” in theIndex.
Buying New Tires To find out what kind and size of tires you need, look at the Tire-Loading Information label. The tires installed on your vehicle when it was new had a Tire Performance Criteria Specification (TPC Spec) number on each tire’s sidewall. When you get new tires, get ones with that same TPC Spec number. That way your vehicle will continue to have tires that are designed to give proper endurance, handling, speed rating, traction, ride and other things during normal service on your vehicle.
- Uniform Tire Quality Gradina Treadwear Quality grades can be fcrund where app!icab!e or! the tire sidewall between tread shoulder and maximum section width. For example: The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (15 ) times as well on the government course as a tire graded 100.
Temperature - A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, and C. representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Wheel Replacement Replace any wheel that is bent, cracked or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts and wheel nuts should be replaced. If the wheel leaks air, replace it (except some aluminum wheels, which can sometimes be repaired). See your dealer if any of these conditions exist. Your dealer will know the kind of wheel you need. Each new wheel should have the same load-carrying capacity, diameter, width, offset and be mounted the same way as the one it replaces.
Used Replacement Wheels -.. L A i n g a d,u, wheel your vehicle is dangerous. You can’t know how it’s been used or how far it’s been driven. It could fail suddenly and cause a crash. If you haveto replace a wheel, use a new GM original equipment wheel. Tire Chains If your vehicle hasP235/55R17 size tires, don’t use tire chains, there’s not enoughclearance. Tire chains used on a vehicle without the proper amount of clearance can causedamage to the brakes, suspension or other vehicle parts.
Notice: If your vehicle has a tire size other than P235/55R17 size tires, use tire chains only where legal and ~ n l l ywhen you must. Use only SAE Class “S” type chains that are the proper size for your tires. Install them on the front tires and tighten them as tightlyas possible with the ends securely fastened. Drive slowly and follow the chain manufacturer’s instructions. If you can hear the chains contacting your vehicle, stop and retighten them. If the contact continues, slow down until it stops.
Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard warning flashers. a tire can cause an injury. The vehicle can slipoff the jack and roll over you or other people. You and they could be badly injured. Find a level place to change your tire. To help prevent the vehicle from moving: 1. Put the shift lever in PARK (P). 2. Set the parking brake firmly. 3. Turn off the engine.
Removing the Spare Tire and Tools 2. Grab the handle and remove the cover. The equipment you’ll need is in the trunk. Instructions for changing yourtires are on the inside of the tire cover located in your trunk. To gain access to the instructions, spare tire and jacking equipment, do the following: I . Press the area at the front of the handle located on the cover so that the back edge raises.
I 3. Unscrew the wing nuts to remove the container that holds the wrench and jack. 4. Remove the wheel wrench, jack and compact spare tire from the trunk. See Compact Spare Tire on page 5-83 for more information about the compact spare tire. 5-74 A - The tools you'll be using include the jack (A) and the wheel wrench (B).
Removing the Wheel Covers Rerneving the Flat Tire and !nsta!!Ing the Spare Tire Models with Center Wheel Cover For models having aluminum wheels with a center wheel cover, use the flat end of the wheel wrench to gently pry the wheel covers off. Be careful not to scratch tho 3!nminnm ?nlhee! edse SRZ! de:? try :t :czc/z it with your hands. 1. Using the wheel wrench, loosen all the wheel nuts. Don’t remove them yet. For models having wheel nuts exposed, use the wheel wrench to remove the wheel nut covers.
-.I 8.5 INCHES (21 cm) -l 3.5 INCHES (8.5 cm) 2. Find the jacking location from the diagrams above and corresponding hoisting notches located in the plastic molding. The front location is 8.5 inches (21 cm) from the rear edge of the front wheel well, and the rear location is 3.5 inches (8.5 cm) from the front edge of the rear wheel well. The notches may also be labeled “JACK’ with an arrow pointing to the jacking location on the vehicle.
tting under a veh.-.e whe.. - t is ,,cked up is dangerous. If the vehicle slipsoff the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. Raising your L -.Iicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lifthead into the proper location before raising the vehicle. 6. Raise the vehicle by turning the jack handle clockwise.
8. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after atime. The wheel could come off and cause an accident. When you CAUTION: (Continued) 5-78 change a wheel, remove an) . s t or dirt fr ,.n the places where the wheel attaches to the vehicle.
9. Place the compact spare tire on the wheel-mounting surface. on withthe rounded end of the nuts toward the wheel. Tighten each nut by hand until the wheel is held against the hub. 11. Lower the vehicle by turning the jack handle counterclockwise. Lower the jack completely.
12. Tighten the wheel nuts firmly in a crisscross sequence as shown. 13. If your vehicle is equipped with wheel nut covers, screw them on with your fingers, then tighten one-quarter turn with the wheel wrench. 5-80 Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead toan accident. Be sure to use the correct wheelnuts. If you have to replace them, be sure toget new GM original equipment wheel nuts.
Notice: Improperly tightened wheel nuts can lead io brake puisation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence andto the proper torque specification. See “Capacities and Specifications” in the index for the wheelnut torque specification. Don’t try to put a wheelcover on your compactspare tire. It won’t fit. Store the wheel cover and lug nut capsin the trunk until you have theflat tire repaired or replaced.
Storing the Spare Tire and Tools E B C Storing a jack, a tire or other ,,,,$merit in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can. See the storage instructions label for information on how to properly position and store the compact spare tire. 5-82 A. Wrench B.
Compact Spare Tire Although the compact spare tire was fully inflated when your vehicle was new, it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 kPa). After installing the compact spare on your vehicle, you should stop as soon as possible and make sure your spare tire is correctly inflated.
Appearance Care Remember, cleaning products can be hazardous. Some are toxic. Others can burst into flames if you strike a match or get them on a hot part of the vehicle. Some are dangerous if you breathe their fumes in a closed space. When you use anything from a container to clean your vehicle, be sure to follow the manufacturer’s warnings and instructions. And always open your doors or windows when you’re cleaning the inside.
FabricICarpet Your dealer has cleanersfor the cleaning of fabric and carpet. Theywill clean normal spots and stains very well. You can get GM-approved cleaning products from your dealer. See GM Vehicle Care/Appearance Materials on page 5-90. Here are some cleaning tips: Always read the instructions on the cleaner label. Clean up stains as soon as you can - before they set. e Carefully scrape off any excess stain. e Use a clean cloth or sponge, and change to a clean area often.
Vinyl Top of the Instrument Panel Use warm water and a clean cloth. Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones or waxes may cause annoying reflections in the windshield and even make it difficult to see through the windshield under certain conditions. Rub with a clean, damp cloth to remove dirt. You may have to do this more than once. Things like tar, asphalt and shoe polish will stain if you don’t get them off quickly.
Wood Panels Care of Safetv Belts --J ----- Use a clean cloth moistened in warm, soapy water (use mild dish washing soap). Dry the wood immediately with a clean cloth. Keep belts clean and dry. Speaker Covers Vacuum around a speaker cover gently, so that the speaker won’t be damaged. Clean spots with just water and mild soap. Glass Surfaces Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass.
Washing Your Vehicle Finish Care The best way to preserve your vehicle’s finish is to keep it clean by washing it often with lukewarm or cold water. Occasional waxing or mild polishing of your vehicle by hand may be necessary to remove residue from the paint finish. You can get GM-approved cleaning products from your dealer. See GM Vehicle Care/Appearance Materials on page 5-90. Don’t wash your vehicle in the direct rays of the sun. Use a car washing soap. Don’t use strong soaps or chemical detergents.
Windshield and Wiroer - - BIades I- If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, wax, sap or other material may be on the blade or windshield. Clean the outside of the windshield with a full-strength glass cleaning liquid. The windshield is clean if beads do not form when you rinse it with water. Grime from the windshield will stick to the wiper blades and affect their performance.
Finish Damage Chemical Paint Spotting Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense. Some weather and atmospheric conditions can create a chemical fallout. Airborne pollutants can fall upon and attack painted surfaces on your vehicle. This damage can take two forms; blotchy, ringlet-shaped discolorations, and small irregular dark spots etched into the paint surface.
GM Vehicle CarelAppearance Materials (cont’d) Description GM Vehicle CarelAppearance Materials (cont’d) Usage Description Usage ~ Chrome Cleaner and Polish Use on chrome or stainless steel. Cleaner Wax Removes light scratches and protects finish. White Sidewall Tire Cleaner Removes soil and black marks from whitewalls. Foaming Tire Shine Low Gloss Cleans, shines and protects in one easy step, no wiping necessary. Vinyl Cleaner Cleans vinyl tops, upholstery and convertible tops.
Vehicle Identification Engine Identification Vehicle Identification Number (VIN) The 8th character in your VIN is the engine code. This code will help you identify your engine, specifications and replacement parts. Service Parts Identification Label You’ll find this label on the under side of the spare tire cover in the trunk. It’s very helpful if you ever need to order parts. On this label is: yourVIN, themodel designation, This is the legal identifier for your vehicle.
Electrical Svstem I Add-on Electrical Equipment Notice: Don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty. Some add-on electrical equipment cankeep other components from working as they should. Your vehicle has an air bag system. Before attempting to add anything electrical to your vehicle, see Servicing Your AirBag-Equipped Vehicle on page 1-59.
Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of fires caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating. If a fuse should blow, see your dealer for service immediately.
I Fuses I 1 2 3 Used 4 5 6 7 Usage Assemblv Line Diaanostic Work Accessory Windshield Wipers Not I Headlamp Low Beam Left Headlamp Low Beam Right Instrument Panel ~~ ! -1 Fuses 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 A 3 7L 43 44 45 I Usage I Headlamp Hiah Beam Left ignition 1 Fog Lamps Transmission Cruise Control Coil Module lniector Bank #2 Not Used Not Used Powertrain Control Module Ignition Oxvgen Sensor Injector Bank #I Cigar Lighter #2 Cigar Lighter #I Daytime Running Lamps Hor
I Relavs 27 28 29 30 31 32 33 34 35 36 37 38 39 40 I Circuit Breakers 41 I II I Usage Headlamp High Beam Headlamp Low Beam Fog Lamps Daytime Running Lamps Horn I Air Conditioner Clutch I Not Used Accessory Not Used Starter 1 Cooling Fan 1 lanition 1 Cooling Fan Series/Parallel Cooling Fan 2 Usage I I Starter The spare fuses are located in numbers 48 through 52. The fuse puller is located in number 53.
To reinstall the rear seat cushion, do the following: hasn’t been rourea rnrougn rne sear cusnlc at all, it won’t be there to work for the next passenger. The person sitting in that position could be badly injured. After reinstalling the seat cushion, always check to be sure that the safety belts are properly routed and are not twisted. ~ i i ~ 1. Buckle the center passenger position safety belt, then route the safety belts through the proper slots in the seat cushion.
Rear Underseat Fuse Block The rear fuse block is located under the rear seat on the driver’s side. The rear seat cushion must be removed to access the rear fuse block. See Removing the Rear Seat Cushion on page 5-96. To access the fuse block, push in the two tabs located at each end of the fuse block cover. Then lift the cover off.
26 27 Body Export Lights, Power Locks I 32 Continuous Variable Road Sensing Suspension 60 61 Park Brake Rear Defoa 66 v I Not Used , v 5-99
I I L Relays 39 40 41 42 43 44 45 I 46 47 49 50 51 52 53 54 55 58 59 5-100 Usage Fuel Pump I Parkina Lamm I Ignition 1 I Park Brake A Park Brake B Park Shift Interlock Reverse Lamps Retained Accessory Power for Sunroof Reverse Lockout Suspension Dampers 48 Ignition 3 Fuel Tank Door Release Interior Lamps Trunk Release Not Used Lock, Cylinder Automatic Level Control Compressor Cigar Lighter Rear Defog 1 I I I I I I Circuit Breakers Usage I I Power Seats I 57 I Power Windows 56 ~~~~~~ The s
10 1-S 8-9-E;-P-E-L-Z-1 8A 3HOa 1 9'P ~~ 8-9-S-P-&-L-I-1 3 - 081P 8A 3HOa 19'P
Capacities and Specifications Capacities Application Air Conditioning Refrigerant R134a Use Refrigerant Oil, R134a Systems English Metric 2.2 Ibs 1.0 kg ! 7.5 quarts 12.3 L 7.1 L Fuel Tank 18.5 gallons 70.1 L Transaxle 15.0 quarts 100 Ib-ft 14.2 L 13.0 Cooling System Engine Oil with Filter Wheel Nut Torque quarts 140 N*m All capacities are approximate. When adding, be sure to fill to the approximate level as recommended in this manual. Recheck fluid level after filling.
5-103
fi NOTES 5-104
Section 6 Maintenance Schedule ~~~~ Maintenance Schedule .................................. -6-2 Introduction ................................................... 6.2 Your Vehicle and the Environment .................... 6-2 Maintenance Requirements .............................. 6-2 How This Section is Organized ......................... 6-3 Part A: Scheduled Maintenance Services ...........6-4 Using Your Maintenance Schedule ...................-6-4 Scheduled Maintenance ..................................
Maintenance Schedule Introduction IMPORTANT: KEEP ENGINE OIL AT THE PROPER LEVEL AND CHANCE AS RECOMMENI 3 Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment. All recommended maintenance procedures are important. Improper vehicle maintenance can even affect the quality of the air we breathe. Improper fluid levels or the wrong tire inflation can increase the level of emissions from your vehicle.
This maintenance schedule is divided into five paris: “Part A: Scheduled Maintenance Services” explains what to have done and how often. Some of these services can be complex, so unless you are technically qualified and have the necessary equipment, you should let your dealer’s service department or another ilified service center do these jobs. Performing maintenance work on a vehicle can be dangerous. In trying to do some jobs, you can be seriously injured.
Part A: Scheduled Maintenance Services This part contains engine oil scheduled maintenance which explains the engine oil life system and how it indicates when to change the engine oil and filter. Also, listed are scheduled maintenance services which are to be performed at the mileage intervals specified. Using Your Maintenance Schedule We at General Motors want to keep your vehicle in good working condition. But we don’t know exactly how you’ll drive it.
Footnotes t The U S . Environmental Protection Agency or the California Air ResourcesBoard has determined that the failure to perform this maintenance item willnot nullify the emission warrantyor limit recall liability prior to the completim of the vehicle 's useful life. We, however, urge that all recommended maintenance services be performed at the indicated intervalsand the maintenance be recorded. + A good time to checkyour brakes is during tire rotation.
7,500 Miles (12 500 km) 30,000 Miles (50 000 km) 0 Rotate tires. See Tire lnspection and Rotation on 0 Replace passenger compartment air filter. If you page 5-64 for proper rotation pattern and additional information. (See footnote +.) 15,000 Miles (25 000 km) 0 Inspect engine air cleaner filter if you are driving in dusty conditions. Replace filter if necessary.An Emission Control Service. (See footnote t.) 0 Replace passenger compartment air filter.
50,000 Miles (83 000 km! 0 Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: - In heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher. - In hilly or mountainous terrain. - When doing frequent trailer towing. - Uses such as limousine service. - Uses such as high performance operation.
82,500 Miles (137 500 km) 100,000 Miles (166 000 km) 0 Rotate tires. See Tire Inspection and Rotation on 0 Replace spark plugs. An Emission Control Service. page 5-60 for proper rotation pattern and additional information. (See footnote +.) 90,000 Miles (150 000 km) 0 Replace passenger compartment air filter. If you drive regularly under dusty conditions, the filter may require replacement more often.
Part B: OwnerChecks and Services WindshieldWasher Fluid Level Check Listed in this part are owner checks and services which should be performed at the intervals specified to help ensure the safety, dependability and emission control performance of your vehicle. Check the windshie!d washer fluid level in the windshield washer tank and add the proper fluid if necessary. See Windshield Washer Fluid on page 5-37 for further details. Be sure any necessary repairs are completed at once.
At Least Twice a Year Automatic Transaxle Check Restraint System Check Check the transaxle fluid level; add if needed. See Automatic Transaxle Fluid on page 5-21. A fluid loss may indicate a problem. Check the system and repair if needed. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts.
1C+arfnUSw:+?h Check - m - Automatic Transaxle Shift Lock Control tem Check I When you are doing this check, the vehicle could move suddenly. If it does, you or others 1. Before you start, be sure you have enough room around the vehicle. 2. Firmly apply both the parking brake and the regular brake. See Parking Brake on page 2-32 if necessary. Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts. 3. Try to start the engine in each gear.
Ignition Transaxle Lock Check While parked, and with the parking brake set, try to turn the ignition key to OFF in each shift lever position. The key should turn to OFF only when the shift lever is in PARK (P). The key should come out only in OFF. Parking Brake and Automatic Transaxle Par1 ‘P) Mech- i s m Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.
Part C: Periodic Maintenance Inspections Listed in this part are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should let your dealer’s service department or otherqualified service center do these jobs. Make sure any necessary repairs are completed at once. Proper procedures to perform these services may be found in a service manual. SeeService Publications Ordering Information on page 7-10.
Engine Cooling System Inspection Brake System Inspection Inspect the hoses and have them replaced if they are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps; replace as needed. Clean the outside of the radiator and air conditioning condenser. To help ensure proper operation, a pressure test of the cooling system and pressure cap is recommended at least once a year. Inspect the complete system.
Part D: Recommended Fluids and Lubricants - Fluids and lubricants identified below by name, part number or specification may be obtained from your dealer. Automatic Transaxle - Power System Usage Fluid/Lubricant Engine oil with the American Petroleum Institute Certified for Gasoline Engines starburst symbol Engine Oil of the proper viscosity. To determine the preferred viscosity for your vehicle’s engine, see Engine Oil on page 5- 73.
Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service and any additional information from “Owner Checks and Services” or “Periodic Maintenance” on the following record pages. Also, you should retain all maintenance receipts.
Maintenance Record (Cont’d) 6-17
Maintenance Record (cont’d) 6-18
Section 7 Customer Assistance Information Customer Assistance Information ...................... Customer Satisfaction Procedure ...................... Customer Assistance for Text Telephone (PTY) Users ............................................... Customer Assistance Offices ........................ GM Mobility Program for Persons with Disabilities .................................................. Roadside Service .................................... 7.2 7-2 7.3 7.3 7.5 7-5 Courtesy Transportation .
Customer Assistance Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Cadillac. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
The BBB Auto Line Program is an out of court program administered by the Council ot Better Business Bureaus to settle automotive disputes regarding vehic!e repairs or the interpretation of the New Vehicle Limited Warranty. Although you may be required to resort to this informal dispute resolution program prior to filing a court action, use of the program is free of charge and your case will generally be heard within 40 days.
United States All Overseas Locations Cadillac Customer Assistance Center Cadillac Motor Car Division P.O. Box 33169 Detroit, MI 48232-51 69 Please contact the local General Motors Business Unit. 1-800-458-8006 1-800-833-2622 (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-882-1112 Fax Number: 313-381-0022 From Puerto Rico: 1-800-496-9992 (English) 1-800-496-9993 (Spanish) Fax Number: 313-381-0022 From U S .
- GM Mobility Proaram for Persons with Disabilities This program, available to qualified applicants, can reimburse you up to $1,000 toward aftermarket driver or passenger adaptive equipment you may require for your vehicle (hand controls, wheelchair/scooter lifts, etc.). This program can also provide you with free resource information, such as areadriver assessment centers and mobility equipment installers. The program is available for a limited period of time from the date of vehicle purchase/lease.
Cadillac Owner PrivilegesTM Reaching Roadside Service Roadside Service provides several Cadillac Owner PrivilegesTMat “no charge,” throughout your Cadillac Warranty Period - 48 months/50,000 miles (80 000 km). Dial the toll-free Roadside Service number: 1-800-882-1112.
Courtesy Transportation Transportation Options Cadillac has always exemplified quality and value in its offering of motor vehicles. To enhance your ownership experience, we and our participating dealers are proud to offer Courtesy Transportation, a customer support program for new vehicles. Warranty service can generally be completed while you wait. However, if you are unable to wait Cadillac helps minimize your inconvenience by providing several transportation options.
Courtesy Rental Vehicle Additional Program Information When your vehicle is unavailable due to overnight warranty repairs, your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle you obtained, at actual cost, up to a maximum of $37.00 per day supported by receipts. This requires that you sign and complete a rental agreement and meet state, local and rental vehicle provider requirements.
Reportina Safetv Defects tothe United States Government Reportina Safety Defectsto the Canadian Government If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA),in addition to notifying General Motors.
Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle, suspension, brakes, electrical, steering, body, etc. RETAIL SELL PRICE: $120.00 Transmission, Transaxle, Transfer Case Unit Repair Manual Service Bulletins Service Bulletins give technical service information needed to knowledgeably service General Motors cars and trucks.
Current and Past Model Order Forms Service Publications are available for current and past model GM vehicles. To request an order form, please specify year and model name of the vehicle. Prices are subject to change without notice and without incurring obligation. Allow ample time for delivery. Note to Canadian Customers: All listed prices are quoted in U.S. funds. Canadian residents are to make checks payable in U.S. funds.
AccessoryPowerOutlets ................................. 3-27 1-3 Adaptive Seat Controls ...................................... AddingWasher Fluid ....................................... 5-37 AdditionalProgramInformation ........................... 7-8 Additives,Fuel ................................................. 5-6 5-93 Add-on ElectricalEquipment ............................ Adjusting the Speakers (Balance/Fade) ...... 3-83, 3-91 Air Bag ReadinessLight ..........................................
Audio Systems (cont.) XMTMSatellite Radio Antenna System ........... 3-106 Auto Exit Seat ................................................ 3-69 Auto Exit Steering Wheel ................................. 3-70 Automatic Level Control ................................... 4-34 Automatic Transaxle 5-21 Fluid ....................................................... Operation ................................................... 2-27 Automatic Transaxle Check ..............................
Care of Your Child Restraints Child Restraint Systems ............................... 1-35 CassetteTapePlayer ............................. 3-104 Infants and Ymmg Children ........................... 1-32 CD Player ................................................. 3-186 Lower Anchorages and Top Tethers for CDS ......................................................... 3-1 06 Children (LATCH System) .......................... 1-41 CassetteTapeMessages ......................... 3-87, 3-97 Older Children ......
Climate Control System (cont.) 3-33 Outlet Adjustment .................................... Rear .......................................................... 3-34 Steering Wheel Controls ............................... 3-38 Climate Controls,DIC Personalization ................ 3-67 Compact Disc Changer Errors ......................... 3-102 3.88, 3-98 Compact Disc Messages .......................... Compact Spare Tire ........................................ 5-83 Compass Calibration ...........................
Door Central Door Unlocking System ... . . . . . . . . . 2-9 Locks .......................................................... 2-8 Power Door Locks ......................................... 2-9 Programmable Automatic Door Locks ............... 2-9 2-10 Rear Door Security Locks ............................. Doors Lock in Gear ......................................... 3-73 Doors Unlock in PARK(P) ................................ 3-75 Doors Unlock Key Off ......................................
Engine (cont.) Exhaust ..................................................... Oil ............................................................. Overheating ................................................ Starting ...................................................... Engine Coolant Level Check .............................. Engine Cooling When Trailer Towing .................. Engine Oil Additives ........................................ Engine Oil Level Check .....................................
Fuel ............................................................... 5-5 Additives ...................................................... 5-6 CaliforniaFuel .............................................. 5-6 Data Display ............................................... 3-56 Filling a Portable Fuel Container ..................... 5-9 Filling YourTank ........................................... 5-7 Fuels in Foreign Countries .............................. 5-6 Gage ..............................................
Heated Seats ........................... .... ..... 1-4 Highway Hypnosis ........................................... 4-23 Hill and Mountain Roads .................................. 4-23 Hitches .......................................................... 4-37 HomeLink Transmitter, Programming .................. 2-48 HomeLink@Transmitter .................................... 2-47 Hood 5-10 Checking Things Under ................................ Release .....................................................
Instrument Panel Ciuster ....................................................... Overview ..................................................... Storage Area .............................................. Instrument Panel Brightness ............................. Interior Lamps ................................................ Interior Plastic Components .............................. LATCH System 1-41 Child Restraints ...........................................
Lockout Protection .......................................... 2-10 Locks 2-9 Central Door Unlocking System .................... Door ........................................................... 2-8 Leaving Your Vehicle .................................... 2-11 Lockout Protection ....................................... 2-10 Power Door .................................................. 2-9 Programmable Automatic Door Locks ............... 2-9 Rear Door Security Locks .............................
Message n*A UIL WarningsanaMessages ........................ 3-60 Mexico, Central America and Caribbean Islands/ Countries (Except Puerto Rico andU.S. Virgin Islands) ....... 7-4 2-40, 2-41 MirrorOperation ..................................... Mirror to Curb In Reverse ................................ 3-77 Mirrors Automatic Dimming Rearview with Onstar@ ..... 2-40 Automatic Dimming Rearview with Onstar@ and Compass .......................................... 2-40 Memory ......................................
Parade Dimming ................... ........... 3-20 Park Aid .................................. ........... 3-25 Park (P) Shifting Into ................................................ 2-34 Shifting Outof ............................................ 2-37 Parking ... 3-25 Assist ......................................... Brake ..................................... ... 2-32 3-47 Brake Indicator Light .................................... Over Things That Burn .................................
R Radios .......................................................... 3-80 Care of Your Cassette Tape Player ............... 3-104 Care ofYour CD Player .............................. 3-106 Care of Your CDs ...................................... 3-106 DICPersonalization ..................................... 3-67 Glovebox-Mounted CD Changer ..................... 3-99 Navigation System ....................................... 3-99 Radio Personalization with Home and Away Feature .................................
Restraint Systems ........... 1-60 Checking .......................... Replacing Parts ......................... ........... 1-60 Restraints. Head ............................................... 1-7 Retained Accessory Power (RAP) ...................... 2-24 Right Front Passenger Position. Safety Belts ...... 1-21 Roadside Service ........................................................ 7-5 Roadside Service Availability .......................... 7-6 Roadside Service for the Hearing or Speech 7-6 Impaired ..
Service ........................................................... 5-3 Adding Equipment to the Outside of Your Vehicle ..................................................... 5-4 Doing Your Own Work ................................... 5-4 Engine Soon Light ....................................... 3-50 Publications Ordering Information ................... 7-10 Service Bulletins ............................................. 7-18 Service Engine Soon Light in the United States or Check Engine Light in Canada ....
T Tachometer ......................... ............... 3-44 Taillamps TurnSignal. and Stoplamps .......................... 5-58 TCS Warning Light .......................................... 3-48 2-20 Testing the Alarm ............................................ Theft-Deterrent, Radio .................................... 3-103 Theft-Deterrent Systems ................................... 2-19 PASS-Key@I l l ............................................. 2-21 2-21 PASS-Key@Ill Operation .........................
Ventilation Adjustment . *. Vinyl .............................. Visors ............................ # . Umbrella Holder ........................................... 2-53 UnderbodyFlushingService ............................. 6-12 UnderhoodFuseBlock .................................... 5-94 Understanding Radio Reception ....................... 3-104 Uniform Tire Quality Grading ............................ 5-67 United States ................................................... 7-4 UsedReplacementWheels .....
When You Are Ready to Leave After Parking on a Hill ......................................................... 4-40 Where to Put the Restraint ..... . . . . . . . 1-38 Why Safety Belts Work .............. .... ... 1-10 Window Lockout ............................................. 2-16 2-14 Windows ....................................................... 2-15 Power ........................................................ 5-89 Windshield andWiper Blades ........................... 3-11 Windshield Washer ........
