Owner's Manual

Windshield Wipers
You control the windshield wipers by turning the band
with the wiper symbol on it.
(!$ (Mist): For a single wiping cycle, turn the band to
mist. Hold it there until the wipers start. Then let go. The
wipers will stop after one wipe. If you want more
wipes, hold the band on mist longer.
(Delay): You can set the wiper speed for a long or
short delay between wipes. This can be very useful
in light rain or snow. Turn the band
to choose the delay
time. The closer to the top of the lever, the shorter
the delay.
0 (Low Speed): For steady wiping at low speed,
turn the band away from you
to the first solid band past
the delay settings.
I) (High Speed): For high-speed wiping, turn the
band further,
to the second solid band past the
delay settings.
0 (Off): To stop the wipers, move the band to off.
Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen
to the windshield,
carefully loosen or thaw them.
If your blades do become
worn or damaged, get new blades or blade inserts.
Windshield Washer
0 (Washer Fluid): There is a paddle marked with the
windshield washer symbol at the top
of the multifunction
lever.
To spray washer fluid on the windshield, push
the paddle. The wipers
will clear the window and then
either stop or return
to your preset speed.
Freezing weather, don se your wasl. __.
until the windshield is warmed. Otherwise the
washer fluid can form ice on the windshield,
blocking your vision.
3-9