Owner's Manual

Finding a Station
BAND: Press this button to switch between AM, FM,
FM2, or
XM1, XM2 (USA only, if your radio is equipped
with
XMTM Satellite Radio Service) or DAB1, DAB2
(Canada only,
if your radio is equipped with DAB). The
display will show your selection.
TUNE: Turn this knob to choose radio stations.
For DAB (Canada only,
if your radio is equipped with
DAB), the TUNE knob allows you
to navigate the
DAB frequency range. Turning this knob will tune up or
tune down the range. The radio will display the letter
L with a number next to it (1 through 23). Each L number
refers
to a frequency and there can be multiple
stations contained in one frequency.
It may also take a
few seconds, once you have tuned
to a frequency,
for that frequency
to gather all of the stations.
Depending on how many stations are within a frequency,
with every tune up or down, you may be tuning
to
another station or to another frequency. The display will
show your selections.
4 SEEK b : Press the right or the left arrow to seek
to the next or to the previous station and stay there.
The radio will seek only
to stations that are in the
selected band and only
to those with a strong signal.
4 SCAN b : Press and hold one of the arrows
for more than two seconds. The radio will produce one
beep. The radio will scan
to a station, play for a few
seconds, then go on
to the next station. SCAN will be
displayed. Press one of the arrows again
to stop
scanning.
The radio will scan only
to stations that are in the
selected band and only
to those with a strong signal.
To scan preset stations, press and hold one of the
arrows for more than four seconds. The radio will
produce two beeps. The radio will scan
to the first preset
station, play for a few seconds, then go on
to the next
preset station. PSCN will be displayed. Press one of the
arrows again or one of the pushbuttons
to stop
scanning.
The radio will scan only
to preset stations that are in the
selected band and only
to those with a strong signal.
3-66