Owner's Manual

Table Of Contents
Problem
No
power.
Disc will not play.
The picture does not
fill
the screen. There are
black borders on the top
and bottom or on both
sides or it looks
stretched out.
Recommended Action
The ignition might not be
in
on or accessory.
The parental control
button might have been
pressed. (The power
indicator light will flash.)
The system might be
off.
The parental control
button might have been
pressed. (The power
indicator light will flash.)
The system might be in
auxiliary source mode.
Press the SRCE button
to toggle between the
DVD player and the
auxiliary source.
The disc is upside down
or is not compatible.
Press the Display button
on the DVD player or on
the remote control.
Change the display mode.
Problem
The disc was ejected, but
it was pulled back into
the DVD player.
~
In auxiliary mode, the
picture moves or scrolls.
~
The language in the
audio or on the screen
is
wrong.
~ ~ ~~~
Recommended Action
The disc is being stored
in the DVD player. Press
the eject button again to
eject the disc.
Check the signal coming
from the auxiliary device
and make sure that the
connection and the signal
is good.
Change the Video
Format
to
PAL or NTSC.
See “Stereo RCA Jacks”
previously for how
to
change the video format.
Press the Menu button
on the DVD player or on
the remote control and
change the audio or
language selection on the
DVD menu.
3-86