Owner's Manual

Table Of Contents
4.
Insert the hoist end
(F)
through the hole
(G)
in
the rear bumper and
into the hoist shaft.
F
5. Raise the tire partway upward. Make sure the
retainer is seated in the wheel opening.
6.
Raise the tire fully against the underside
of
the
vehicle by turning the wheel wrench clockwise
until you hear two clicks or feel it skip twice.
The
cable cannot be overtightened.
PUSH
&
PULL
7.
Make sure the tire is stored securely. Push, pull,
and then
try
to
rotate or turn the tire. If the tire
moves, use the wheel wrench to tighten the cable.
Reinstall the spare tire lock
(if
equipped).
5-89