Owners Manual

Turn Signal On Chime
Flash-to-Pass
If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the
turn signal and the message
TURN SIGNAL ON will
also appear in the
DIC. To turn the chime and message
off, move the turn signal lever to the off position.
Headlamp High/Low-Beam Changer
20 go (Headlamp High/Low Beam Changer): To
change the headlamps from low to high beam, push the
lever toward the instrument panel.
To return to
low-beam headlamps, pull the multifunction lever toward
you. Then release it.
When the high beams are
on, this indicator light on
the instrument panel
cluster will also be
on
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
It works even if your headlamps are in the automatic
position.
To use it, pull the turn signal lever toward you, then
release it.
If your headlamps are in the automatic position or 01 I
low beam, your high-beam headlamps will turn on.
They’ll
stay on as long as you hold the lever toward yo11
The high-beam indicator on the instrument panel
cluster will come on. Release the lever to return
to
normal operation.
3-8