Owners Manual

uiu,
4d (Mode): Press this button to manually change the
direction of the airflow in your vehicle; keep pressing the
button until the desired mode appears on the display.
If you press the mode button to select an air delivery
mode, the display will change
to show you the selected
air mode delivery. The display will then show the
current status of the system. When the system is turned
off, the display will go blank after displaying the
current status of the system.
2 (Panel): This setting will deliver air to the
instrument panel outlets.
+? (Bi-Level): This setting will deliver warmer air to the
floor and cooler air
to the instrument panel outlets.
42 (Floor): This setting will deliver air to the floor
outlets.
+2 (Defog): See “Defogging and Defrosting’’ later in
this section.
& (Recirculation): Press this button to limit the
amount of outside air entering your vehicle. The light on
the recirculation button will glow. This is helpful when you
are trying
to limit odors entering your vehicle and for
maximum air conditioning performance in hot weather.
Press this button again
to allow outside air to enter the
vehicle. The light on the recirculation button will go
off.
Pressing this button cancels the auto recirculation
feature. To resume the auto recirculation function, press
the AUTO button. Each time the vehicle is started, the
system will revert
to the auto recirculation function.
If you select recirculation while in defrost, defog or floor,
the light on the button will flash and go
out to let you know
this is not allowed. This is
to prevent fogging.
When the weather is cool or damp, operating the system
in recirculation for extended periods of time may cause
fogging of the vehicle’s windows.
To clear the fog, select
either defog or front defrost. Be sure
A/C off is not
selected.
You will want to allow the air conditioning to run
automatically
to help dehumidify the air.
3-26