Owners Manual

3. Insert the hoist end
(open end)
(F) of the
extension through
the hole
(G) in the
rear bumper.
Be sure the hoist end of the extension connects
into the hoist shaft (E). The ribbed square end
of the extension is used to lower the spare tire.
4. Turn the wheel wrench (H) counterclockwise to
lower the spare tire
to the ground. Continue to
turn the wheel wrench until the spare tire can be
pulled out from under the vehicle.
I I
5. The wheel wrench
has a hook that allows
you to pull the hoist
cable toward you
to assist in reaching
the spare tire.
5-80