Owners Manual

Front Position
Front Tire Flat:
If the fiat tire is on a front tire of
the vehicle, you’ll need
to use the jack handle (C)
and only one jack handle extension (D). Attach
the wheel wrench
to the jack handle extension.
Attach the jack handle to the jack. Position the jack
on the frame behind the flat tire where the frame
sections overlap. Turn the wheel wrench clockwise
to raise the vehicle. Raise the vehicle far enough
off the ground so there is enough room for the spare
tire to clear the ground.
Rear Position
Rear Tire Flat:
If the flat
tire is on a rear tire of the
vehicle, you’ll need to
use the jack handle
(C)
and both jack handle
extensions
(D). Attach the
wheel wrench
to the
jack handle extensions.
Attach the jack handle to
the jack. Use the
jacking pad provided on
the rear axle.
Turn the wheel wrench clockwise to raise the vehicle.
Raise the vehicle far enough
off the ground so there is
enough room for the spare tire to clear the ground.
5-84