Instruction Manual

Two buttons are located inside the liftgate. One button
is to tilt the seatback forward for added storage
space or when storing a flat tire. The other button is
the power folding seat button. The button behind
the second row seat is also a power folding seat button.
Before folding or unfolding the third row seat, all of
the following conditions must be met:
• The liftgate or passenger’s side rear door
must be open.
• The unlock button on either the remote keyless
entry transmitter or the door must be pressed
three times to enable the rear seat for two minutes,
or the ignition must be in ON or ACCESSORY.
• The vehicle must be in PARK (P).
• The vehicle cannot have a low battery.
After the seat has folded, the panel on the seat must be
folded forward to create the flat floor.
If the seat’s path is blocked it will stop and back away.
Press the button again to return the seat to its
previous position.
Before returning the third row seat to the passenger
seating position, the panel must be folded back
upon itself. Press one of the power folding seat
buttons and the seat will unfold into the seating position.
If the seat is not unfolded fully into the seating position,
a chime will sound when the vehicle is shifted out
of PARK (P).
1-9