Get To Know Manual

STS
VOICE RECOGNITION
(if equipped)
This feature allows for hands-free
operation of your navigation and
audio system. It can be used when
the ignition is in the On or Accessory
position. The system is programmed
for the English language only.
Using Voice Recognition
1. Press the (Talk) button on the
steering wheel until a beep
sounds. Voice recognition is active
when the microphone symbol is
displayed on the navigation
screen.
2. Clearly speak one of the available
commands listed in your
Navigation System Manual. The
system will repeat and implement
the command.
If the system does not recognize a
spoken command, try again. If a
spoken command is not available,
the system will inform you of its
status. For optimum functionality,
keep interior noise levels to a
minimum; otherwise, the system
may not understand the command.
3. To end voice recognition, remain
silent. After approximately five
seconds of silence, the system
automatically cancels Voice
Recognition.
See the Navigation System Manual
for more information.
INTELLIBEAM AUTOMATIC
HEADLAMPS (if equipped)
IntelliBeam maximizes forward night
vision by automatically turning on
the high-beam headlamps when no
other vehicle traffic is present, and
switches to low-beam intensity when
the headlamps or taillamps of other
vehicles are detected. The system
uses a digital light sensor on the
rearview mirror to monitor
surrounding traffic conditions. It
operates only when driving over 20
mph.