Get To Know Manual

STS
Selecting a Follow Distance (GAP)
Use the GAP button on the steering
wheel to adjust the distance between
you and the vehicle ahead of you.
+ (Increase Follow Distance): Press
the top of the GAP button to increase
the follow distance.
– (Decrease Follow Distance): Press
the bottom of the GAP button to
decrease the follow distance.
The (Vehicle Ahead) symbol on
the Head-Up Display will illuminate
when a vehicle is detected in your
path. Adaptive Cruise Control will
adjust your speed to follow the
vehicle at the selected follow
distance.
Adaptive Cruise Control Alert
If driver action is required when
using Adaptive Cruise Control, the
(Adaptive Cruise Control Alert)
symbol on the Head-Up Display
flashes and a warning beep sounds.
This may occur when approaching a
vehicle too rapidly and the system
cannot apply sufficient braking.
POWER MIRRORS AND
CURB-VIEW ASSIST
The power mirrors control is located
on the driver’s door and controls
both outside rearview mirrors as well
as the outside parallel park (curb-
view) assist function. Curb-view assist
tilts down the selected outside
rearview mirror when the vehicle is
shifted into Reverse.
Activating Curb-View Assist
Move the toggle switch in the center
of the power mirror control to the
right to activate curb-view assist for
the passenger-side rearview mirror
and to the left for the driver-side
rearview mirror, and then shift into
Reverse.
Neither mirror will tilt down to the
curb-view position if the toggle
switch is in the middle position.
Vehicle Personalization
VEHICLE PERSONALIZATION
SETTINGS
A variety of your vehicle’s features
can be programmed to a preferred
setting for up to two people. On
vehicles without the navigation audio
system, use the Personal Settings
Menu to set feature preferences.
Note: Adaptive Cruise Control will not apply
hard braking or bring the vehicle to a
complete stop, nor will it respond to
stopped vehicles. See Sections 3 and 4 of
your Owner Manual for more information.