Navigation Manual

If an error appears on the display, see “CD
Messages” later in this section.
If viewing a map screen, touch the CD screen
button. The display will split between the audio
screen and the map screen. If you do not want to
view a split screen or you are not on a map
screen, press the AUDIO key then press the
AUDIO key repeatedly until CD is selected
or touch the CD screen button.
M (Load): To load one disc, do the following:
1. Press the load hard key and follow the screen
message displayed.
2. When the system displays “Insert Disc
(number)”, insert the disc partway into the slot,
label side up. The system will pull it into the
first available slot and start playing. The
system will display the type of disc inserted.
To load multiple discs, do the following:
1. Press and hold the load hard key and follow
the screen message displayed.
2. When the system displays “Insert Disc
(number)”, insert the disc partway into the slot,
label side up. The system will pull it in.
3. Once a disc is loaded, the system will display
“Insert Disc (number)” again. Load the next
disc. Repeat this procedure for each disc.
The player takes up to six discs, do not try
to load more than six. The system will
not display the disc types when loading all,
until the discs have been read by the system.
Once all discs have been inserted, the
system will start playing the last loaded disc.
Z (Eject): To eject a disc, do the following:
1. Press the eject hard key.
2. The system will display “Ejecting Disc”.
Press the DISC screen button to display the
Disc Changer screen. Select the disc to eject.
If a selection is not made, the system will eject
the disc from the current slot. If the disc is not
removed from the slot, the system will pull it
back in after 10 seconds and start playing it.
To eject all discs, press and hold the eject hard
key. The system will display the disc number being
ejected.
72