Specifications

Corvette and Cadillac XLR.
Recommendation/Instructions:
If this is the first complaint for this condition
flush and fill the rear axle with mineral based
lubricant P/N 89021669 (in Canada 89021670)
gear lube and 4 ounces of the friction modifier
additive P/N 01052358 (in Canada 992694).
If this is a repeat complaint or the condition
persists after the flush and fill, replace the right and
left rear axle clutch packs following published
service procedures.
After clutch pack replacement use 1.6 l (1.69
qt) synthetic axle lubricant GM P/N 12378261
(Canadian P/N 10953455). and 4 ounces of the
friction modifier additive P/N 01052358 (in Canada
992694).
Note: 2006 Z06 equipped vehicles require 2.55 l
(2.70 qt) synthetic axle lubricant GM P/N 12378261
(Canadian P/N 10953455) and approximately 190
ml (6.4 oz) limited-
slip differential lubricant additive
GM P/N 1052358 (Canadian P/N 992694).
Note 2: Export vehicles use 2.01 l (2.12 qt)
synthetic axle lubricant GM P/N 12378261
(Canadian P/N 10953455) and approximately 150
ml (5.1 oz) limited-
slip differential lubricant additive
GM P/N 1052358 (Canadian P/N 992694).
Once the axle fluid has been changed the car must
be driven in 8 - 10 SLOW figure eights to work the
fluid between the clutch plates.
Note 3: PRIOR TO INSTALLING THE FRICTION
MODIFIER ADDITIVE FOR EITHER OF THE ABOVE
REPAIRS THE BOTTLE MUST BE SHAKEN
VIGOROUSLY FOR AT LEAST 1 MINUTE TO MIX THE
ADDITIVE THOROUGHLY.
------
Last edited by Vet; 01-24-2008 at 10:38 PM.
Vet
View Public Profile
Send a private message to Vet
Send email to Vet