Specifications

socket handle for leverage. Both my plugs did not require much effort to loosen… pipe was not
needed.
Next, loosen and remove the drain plug. The oil will come blasting out and may splash in the
pan so shield your face. Allow the axle to drain for a while. Mine was still dripping 12 hours
later.
Clean the drain plug and area around the drain hole and install drain plug. Torque to 35 Nm or
26 lb/ft. I chose to torque by hand… basically just got it nice and snug. Do not overtighten. You
could get a torque wrench on the drain plug easily if you wanted, but not on the fill plug. If you
are not sure about the torque “feel”, use a torque wrench on the drain plug in order to get a